Chemical Engineering Design (inbunden)
Fler böcker inom
Format
Inbunden (Hardback)
Språk
Engelska
Antal sidor
1320
Utgivningsdatum
2012-02-18
Upplaga
2
Förlag
Butterworth-Heinemann
Medarbetare
Sinnott, Ray
Illustrationer
illustrations
Dimensioner
228 x 152 x 44 mm
Vikt
1900 g
Antal komponenter
1
Komponenter
,
ISBN
9780080966595
Chemical Engineering Design (inbunden)

Chemical Engineering Design

Principles, Practice and Economics of Plant and Process Design

Inbunden Engelska, 2012-02-18
1136
Skickas inom 5-8 vardagar.
Fri frakt inom Sverige för privatpersoner.
Finns även som
Visa alla 2 format & utgåvor
Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market.

It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes.

A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors.

This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors).

New to this edition:

  • Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects.
  • New discussion of conceptual plant design, flowsheet development and revamp design
  • Significantly increased coverage of capital cost estimation, process costing and economics
  • New chapters on equipment selection, reactor design and solids handling processes
  • New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography
  • Increased coverage of batch processing, food, pharmaceutical and biological processes
  • All equipment chapters in Part II revised and updated with current information
  • Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards
  • Additional worked examples and homework problems
  • The most complete and up to date coverage of equipment selection
  • 108 realistic commercial design projects from diverse industries
  • A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website
  • Extensive instructor resources: 1170 lecture slides plus fully wor...
Visa hela texten

Passar bra ihop

  1. Chemical Engineering Design
  2. +
  3. Absorption-Based Post-Combustion Capture of Carbon Dioxide

De som köpt den här boken har ofta också köpt Absorption-Based Post-Combustion Capture of Car... av Paul Feron (inbunden).

Köp båda 2 för 3435 kr

Kundrecensioner

Har du läst boken? Sätt ditt betyg »

Fler böcker av Gavin Towler

Recensioner i media

"An essential support text for the traditional design product. ...Well written, it is easy to read and is superbly indexed" --Trans IChemE

"Bottom line: For a holistic view of chemical engineering design, this book provides as much, if not more, than any other book available on the topic. Nearly every subject is accompanied by examples and new technologies are also addressed. In short, a complete, well-written and illustrated resource that is a pleasure to use." --From www.cheresources.com (Chemical Engineering Resources)

"Chemical Engineering Design is a complete text for students of chemical engineering. Written for the senior design course, and also suitable for introduction to chemical engineering courses, it covers the basics of unit operations and the latest aspects of process design, equipment selection, plant and operating economics, safety and loss prevention. It includes detailed worked examples, case studies, end-of-chapter exercises, plus supporting data, spreadsheet calculations and equipment specification sheets for downloading." --Chemical Engineering Progress

"The book was originally written by British chemical engineer Sinnott as Volume Six of the Chemical Engineering series edited by Coulson and Richardson. It was intended as a stand-alone design textbook for undergraduate design projects that would supplement the other volumes, so it was no long stretch to publish it separately in 2008. Towler (chemical engineering, Northwestern U., Illinois) helped update and revise it, and integrated US laws, codes, and standards into it. This second edition takes account of comments about strengths and weaknesses by students and instructors. It also is rearranged to fit a typical two-course senior design sequence better, focusing first on process design then on plant design." --Reference and Research Book News, Inc.



Bloggat om Chemical Engineering Design

Övrig information

Gavin Towler is the Vice President and Chief Technology Officer of UOP LLC, a Honeywell company. UOP is a leading supplier of catalysts, process technology, proprietary equipment and services to the oil, gas and petrochemical industries. In this capacity he is responsible for delivering process, catalyst and equipment innovations for UOP's four businesses.

Gavin has 20 years of broad experience of process and product design and has 65 US patents. He is co-author of "Chemical Engineering Design, a textbook on process design, and is an Adjunct Professor at Northwestern University, where he teaches the senior design classes.

Gavin has a B.A. and M.Eng. in chemical engineering from Cambridge University and a Ph.D. from U.C. Berkeley. He is a Chartered Engineer and Fellow of the Institute of Chemical Engineers, and is a Fellow of the AIChE. Ray Sinnott's varied career, mainly in design and development, began with several major companies including Dupont and John Brown. The main areas covered within these appointments were: Gas Production and Distribution, Nuclear Energy, Elastomers and Textile fibres.

After his career in industry he joined the Chemical Engineering Department, University of Wales Swansea in 1970, specialising in teaching process and plant design, and other engineering practice subjects.

The first edition of Chemical Engineering Design (Coulson and Richardson's Vol 6) was published in 1983. Subsequent editions have been published at approximately 5 year intervals.

Ray Sinnott retired from full time teaching in 1995 but has maintained close contact with the engineering profession.

Innehållsförteckning

Part I: Process Design Chapter 1 Introduction to Design Chapter 2 Process Flowsheet Development Chapter 3 Utilities and Energy Efficient Design Chapter 4 Process Simulation Chapter 5 Instrumentation and Process Control Chapter 6 Materials of Construction Chapter 7 Capital Cost Estimating Chapter 8 Estimating Revenues and Production Costs Chapter 9 Economic Evaluation of Projects Chapter 10 Safety and Loss Prevention Chapter 11 General Site Considerations Chapter 12 Optimization in Design Part II: Plant Design Chapter 13 Equipment Selection, Specification and Design Chapter 14 Design of Pressure Vessels Chapter 15 Design of Reactors and Mixers Chapter 16 Separation of Fluids Chapter 17 Separation Columns (Distillation, Absorption and Extraction) Chapter 18 Specification and Design of Solids-Handling Equipment Chapter 19 Heat Transfer Equipment Chapter 20 Transport and Storage of Fluids