Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013) (inbunden)
Fler böcker inom
Inbunden (Hardback)
Antal sidor
John Wiley & Sons Inc
illustrations (black and white)
282 x 226 x 69 mm
3428 g
Antal komponenter
Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013) (inbunden)

Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013)

Inbunden Engelska, 2014-01-31
Skickas inom 7-10 vardagar.
Fri frakt inom Sverige för privatpersoner.
Finns även som
Visa alla 2 format & utgåvor
Proceedings containing 231 manuscripts that were submitted and approved for the 13 th biennial worldwide refractories congress recognized as the Unified International Technical Conference on Refractories(UNITECR), held September 10-13, 2013.
Visa hela texten

Passar bra ihop

  1. Proceedings of the Unified International Technical Conference on Refractories (UNITECR 2013)
  2. +
  3. Fundamentals of Refractory Technology

De som köpt den här boken har ofta också köpt Fundamentals of Refractory Technology av James P Bennett, Jeffrey D Smith (häftad).

Köp båda 2 för 3358 kr


Har du läst boken? Sätt ditt betyg »

Fler böcker av författarna

Övrig information

DANA G. GOSKI, PhD, is the Director of Research at Allied Mineral Products in Columbus, Ohio. Dr. Goski earned her PhD in Engineering from Dalhousie University, Canada. She is a member of The American Ceramic Society s (ACerS) Refractories Division, a co-inventor on a number of international patents, and an ardent supporter of science and engineering educational outreach activities. JEFFREY D. SMITH, PhD, is an Associate Professor of Ceramic Engineering, Department of Materials Science and Engineering at the Missouri University of Science and Technology in Rolla. Dr. Smith is a Fellow of The American Ceramic Society and his current research interests include high temperature materials, condensed and non-condensed phase equilibria, high temperature corrosion processes, and characterization of ceramics.


Preface xxi Advanced Installation Techniques and Equipment Tapholes Repair on CSN'S Blast Furnace 3: Core & Cast and Core & Plug* 21 P.C. da Sousa, T. Talaat, T.I. Souza; P.R. de O. Cordeiro, A.L. Saraiva, E.S. Neves, and E. G. Fernandes Advanced Testing of Refractories Corrosion of Corundum-Mullite Refractories in Gaseous HCI/H2O Atmosphere at Elevated Temperature 79 M.M. Jafari, M. Ghanbari, F. Golestanifard, and R. Naghizadeh High Temperature Characteristics of Refractory Zirconia Crucibles Used for Vacuum Induction Melting 107 A. Quadling, L. Vandeperre, W.E. Lee, ad P. Myers Influence of the Cabores Content on the Strength of Carbon Bonded Alumina Obtained by Means of Small Punch Test 135 S. Soltysiak, M. Abendroth, and M. Kuna Contribution of Different Binder Systems to Young's Modulus of Elasticity of Carbon-Bonded Alumina at Elevated Temperatures 147 J. Werner and C.G. Aneziris Cement and Lime Refractories Development of an Electrofused MgO-CaZrO3 Refractory with Addition of Hercynite for the Cement Industry 173 G. Alan Castilo, Fabiola Davila, T.K. Das Roy, B. Krishnan, Ana-Maria Guzman, and S. Shaji The Effect of TiO2 on Properties and Microstructure of Chrome-Free Basic Brick 183 S. Ghanbarnezhad, M. Bavand-Vandchali, A. R. Naghizadeh The Process of New Phases Formation in the AI2SiO5-ZrSiO4 Refractory Material During Industrial Test in Cement Kiln Preheater 199 Dominika Madej, Jacek Szozerba, and Krzysztof Dul Influence of Andalusite Addition and Particle Size on Properties of Bauxite-Silicon Carbide Brick 221 Jinxing Ding, Guotian Ye, Yaozheng Li, Lin Yuen, and Anping Fu Developments in Basic Refractories Microstructural and Physico-Chemical Evolution of Al2O3 and Fe2O3 Nanoparticles Doped Magnesia (MgO) Sintered at 1600 C 245 C. Gomez Rodriguez, T.K. Das Roy, S. Shaji, G.A. Castillo Rodriguez, and L. Garcia Quinonez Development of Planar and Cylindrical Refractories with Graded Microstructure 267 Uwe Scheithauer, Tim Slawik, Kristin Haderk, Tassilo Moritz, and Alexander Michaelis Aluminates Influence on Evolution of the Thermomechanical Properties of Refractory Materials from the CaO-MgO-Al2O3-ZrO2 System 285 J. Szczerba, M. Szymaszek, E. Sniezek, D. Madej, R. Prorok, and I. Jastrzebska Metastability in the MgAl204-Al2O3 System 303 Kelley R. Wilkerson, Jeffrey D. Smith, and James G. Hemrick Energy Savings Through Refractory Design Improvement of Thermal Efficiency in Steel Ladles 345 Yong M. Lee, Sanjay Kumar, Jim Bradley, Lionel Rebouillat, and Norman Roy Energy Saving of Slab Reheating Furnaces by Improvements of Refractories 355 Masaharu Sato, Takeuchi Tomohide, Kohno Kohji, and Shimpo Akihiro Novel Generation of Kiln Furniture 361 U. Scheithauer, C. Freytag, K. Haderk, T. Moritz, M. Zins, and A. Michaelis Global Education in Refractories Iron and Steel Making Refractories-Blast Furnace Troughs Irons and Steel Making Refractories-BOF Iron and Steel Making Refractories-Coke Ovens Influence of Thermal Expansion Behavior on the Adhesive Strength of Silica Mortor 499 Atsuya Kasai Iron and Steel Making Refractories-Continuous Casting Properties of Self-Glazing Al2O3-C-Refractories Influenced by the Graphite Content and Nanoscaled Additives 529 Susann Ludwig, Vasileios Roungos, and Christos G. Aneziris Iron and Steel Making Refractories-General Development of Active and Reactive Carbon-Bonded Filters for Steel Melt Filtration 565 M. Emmel and C.G. Aneziris Different Fabrication Routes for Carbon-Bonded Al2O3-C and Their Influence on the Physical and Mechanical Properties 591 Yvonne Klemm, Horst Biermann, and Christos Aneziris Optimum Quantity of Gas Blown into the Bore of Tundish Upper Nozzle 609 A. Mizobe, J. Kurisu, K. Tsuduki, M. Yamamoto, T. Oouchi, and K. Oki Chemical Wear of Al2O3-MgO-C Bricks by Air and Basic Slags 649 Leonardo Musante, Pablo G. Gall