Edward J. Haug – författare
Visar alla böcker från författaren Edward J. Haug. Handla med fri frakt och snabb leverans.
6 produkter
6 produkter
E-bok
PDF, Engelska, 1986672 kr
Läs direkt efter köp
The book is organized into four chapters. The first three treat distinct types of design variables, and the fourth presents a built-up structure formulation that combines the other three. The first chapter treats finite-dimensional problems, in which the state variable is a finite-dimensional vector of structure displacements and the design parameters. The structual state equations are matrix equations for static response, vibration, and buckling of structures and matrix differential equations for transient dynamic response of structures, which design variables appearing in the coefficient matrices.
Inbunden, Engelska, 2026
848 kr
Kommande
This open access book presents a differential geometric formulation for kinematics and dynamics of roboticmanipulators, both nonredundant and redundant, resulting in a rigorous treatment of ordinarydifferential equations (ODE) for manipulator dynamics that are ideally suited for either input oroperational space robot control. The author assumes no background in abstract topology ofdifferential geometry; mathematical and computational concepts are introduced using onlymultivariable calculus at the undergraduate level applied to model engineering applications.Examples are treated throughout to provide a foundation for understanding modern conceptsand techniques that have often only been presented at an abstract mathematical level intheoretical robotics literature that is not generally accessible to the engineer. The formulationpresented in this book further obtains ordinary differential equations that represent thedynamics of robotic systems that are reliably solved numerically with established Runge-Kuttamethods. Lagrange multipliers that are ill-suited for robotic control are avoided . Examples ofrealistic manipulators are presented with numerical results that demonstrate the desiredperformance of modern analytical and computational methods.This book is open access, which means that you have free and unlimited access;Defines singularity free assembly components for reliable robot control;Obtains input and operational space ordinary differential equations of manipulator dynamics;Presents operational space kinematic control of robots with obstacle avoidance constraints.
E-bok
PDF, Engelska, 20131 977 kr
Läs direkt efter köp
This book contains the edited versions of lectures and selected contributed papers presented at the NATO Advanced Research Workshop on Real-Time Integration Methods For Mechanical System Simulation, held in Snowbird, Utah, August 7-11, 1989. The Institute was attended by 42 participants from 9 countries, including leading mathematicians and engineers from universities, research institutions, and industry. The majority of participants presented either invited or contributed papers during the Institute, and everyone participated in lively discussions on scientific aspects of the program. The Workshop provided a forum for investigation of promising new directions for solution of differential-algebraic equations (DAE) of mechanical system dynamics by mathematicians and engineers from numerous schools of thought. The Workshop addressed needs and opportunities for new methods of solving of DAE of mechanical system dynamics, from the perspective of a broad range of engineering and scientific applications. Among the most exciting new applications addressed was real time computer simulation of mechanical systems that, for the first time in human history, permits operator-in-the-Ioop simulation of equipment that is controlled by the human; e.g., driving a vehicle, operating a space telerobot, operating a remote manipulator, and operating construction equipment. The enormous potential value of this new application and the fact that real-time numerical integration methods for DAE of mechanical system dynamics is the pacing problem to be solved in realizing this potential served to focus much of the discussion at the Workshop.
Häftad, Engelska, 2011
1 619 kr
Skickas inom 10-15 vardagar
This book contains the edited versions of lectures and selected contributed papers presented at the NATO Advanced Research Workshop on Real-Time Integration Methods For Mechanical System Simulation, held in Snowbird, Utah, August 7-11, 1989. The Institute was attended by 42 participants from 9 countries, including leading mathematicians and engineers from universities, research institutions, and industry. The majority of participants presented either invited or contributed papers during the Institute, and everyone participated in lively discussions on scientific aspects of the program. The Workshop provided a forum for investigation of promising new directions for solution of differential-algebraic equations (DAE) of mechanical system dynamics by mathematicians and engineers from numerous schools of thought. The Workshop addressed needs and opportunities for new methods of solving of DAE of mechanical system dynamics, from the perspective of a broad range of engineering and scientific applications. Among the most exciting new applications addressed was real time computer simulation of mechanical systems that, for the first time in human history, permits operator-in-the-Ioop simulation of equipment that is controlled by the human; e.g., driving a vehicle, operating a space telerobot, operating a remote manipulator, and operating construction equipment. The enormous potential value of this new application and the fact that real-time numerical integration methods for DAE of mechanical system dynamics is the pacing problem to be solved in realizing this potential served to focus much of the discussion at the Workshop.
E-bok
PDF, Engelska, 2012687 kr
Läs direkt efter köp
These proceedings contain lectures presented at the NATO Advanced Study Institute on Concurrent Engineering Tools and Technologies for Mechanical System Design held in Iowa City, Iowa, 25 May -5 June, 1992. Lectures were presented by leaders from Europe and North America in disciplines contributing to the emerging international focus on Concurrent Engineering of mechanical systems. Participants in the Institute were specialists from throughout NATO in disciplines constituting Concurrent Engineering, many of whom presented contributed papers during the Institute and all of whom participated actively in discussions on technical aspects of the subject. The proceedings are organized into the following five parts: Part 1 Basic Concepts and Methods Part 2 Application Sectors Part 3 Manufacturing Part 4 Design Sensitivity Analysis and Optimization Part 5 Virtual Prototyping and Human Factors Each of the parts is comprised of papers that present state-of-the-art concepts and methods in fields contributing to Concurrent Engineering of mechanical systems. The lead-off papers in each part are based on invited lectures, followed by papers based on contributed presentations made by participants in the Institute.
Häftad, Engelska, 2011
544 kr
Skickas inom 10-15 vardagar
These proceedings contain lectures presented at the NATO Advanced Study Institute on Concurrent Engineering Tools and Technologies for Mechanical System Design held in Iowa City, Iowa, 25 May -5 June, 1992. Lectures were presented by leaders from Europe and North America in disciplines contributing to the emerging international focus on Concurrent Engineering of mechanical systems. Participants in the Institute were specialists from throughout NATO in disciplines constituting Concurrent Engineering, many of whom presented contributed papers during the Institute and all of whom participated actively in discussions on technical aspects of the subject. The proceedings are organized into the following five parts: Part 1 Basic Concepts and Methods Part 2 Application Sectors Part 3 Manufacturing Part 4 Design Sensitivity Analysis and Optimization Part 5 Virtual Prototyping and Human Factors Each of the parts is comprised of papers that present state-of-the-art concepts and methods in fields contributing to Concurrent Engineering of mechanical systems. The lead-off papers in each part are based on invited lectures, followed by papers based on contributed presentations made by participants in the Institute.