Francis Balestra – författare

The text begins by discussing bulk silicon and SOI MOSFETs. The electronic transport in the inversion layer, the influence of impurity freeze-out, the special electrical properties of SOI structures, the device reliability and the interest of a low temperature operation for the ultimate integration of silicon down to nanometer dimensions are described. The next two chapters deal with Silicon-Germanium and III-V Heterojunction Bipolar Transistors, as well as III-V High Electron Mobility Transistors (HEMT). The physical effects in III-V semiconductors at low temperature, the HEMT and HBT static, high frequency and noise properties, and the comparison of various cooled III-V devices are also addressed. The next chapter treats quantum effect devices made of silicon materials. The major quantum effects at low temperature, quantum wires, quantum dots as well as single electron devices and applications are investigated and the last chapter overviews the performances of cryogenic circuits and their applications.

A review of the electrical properties, performance and physical mechanisms of the main silicon-on-insulator (SOI) materials and devices. Particular attention is paid to the reliability of SOI structures operating in harsh conditions. The first part of the book deals with material technology and describes the SIMOX and ELTRAN technologies, the smart-cut technique, SiCOI structures and MBE growth. The second part covers reliability of devices operating under extreme conditions, with an examination of low and high temperature operation of deep submicron MOSFETs and novel SOI technologies and circuits, SOI in harsh environments and the properties of the buried oxide. The third part of the book deals with the characterization of advanced SOI materials and devices, covering laser-recrystallized SOI layers, ultrashort SOI MOSFETs and nanostructures, gated diodes and SOI devices produced by a variety of techniques. The last part reviews future prospects for SOI structures, analyzing wafer bonding techniques, applications of oxidized porous silicon, semi-insulating silicon materials, self-organization of silicon dots and wires on SOI and some physical phenomena.

A review of the electrical properties, performance and physical mechanisms of the main silicon-on-insulator (SOI) materials and devices. Particular attention is paid to the reliability of SOI structures operating in harsh conditions. The first part of the book deals with material technology and describes the SIMOX and ELTRAN technologies, the smart-cut technique, SiCOI structures and MBE growth. The second part covers reliability of devices operating under extreme conditions, with an examination of low and high temperature operation of deep submicron MOSFETs and novel SOI technologies and circuits, SOI in harsh environments and the properties of the buried oxide. The third part of the book deals with the characterization of advanced SOI materials and devices, covering laser-recrystallized SOI layers, ultrashort SOI MOSFETs and nanostructures, gated diodes and SOI devices produced by a variety of techniques. The last part reviews future prospects for SOI structures, analyzing wafer bonding techniques, applications of oxidized porous silicon, semi-insulating silicon materials, self-organization of silicon dots and wires on SOI and some physical phenomena.

Device and Circuit Cryogenic Operation for Low Temperature Electronics is a first in reviewing the performance and physical mechanisms of advanced devices and circuits at cryogenic temperatures that can be used for many applications. The first two chapters cover bulk silicon and SOI MOSFETs. The electronic transport in the inversion layer, the influence of impurity freeze-out, the special electrical properties of SOI structures, the device reliability and the interest of a low temperature operation for the ultimate integration of silicon down to nanometer dimensions are described. The next two chapters deal with Silicon-Germanium and III-V Heterojunction Bipolar Transistors, as well as III-V High Electron Mobility Transistors (HEMT). The basic physics of the SiGe HBT and its unique cryogenic capabilities, the optimization of such bipolar devices, and the performance of SiGe HBT BiCMOS technology at liquid nitrogen temperature are examined. The physical effects in III-V semiconductors at low temperature, the HEMT and HBT static, high frequency and noise properties, and the comparison of various cooled III-V devices are also addressed.The next chapter treats quantum effect devices made of silicon materials. The major quantum effects at low temperature, quantum wires, quantum dots as well as single electron devices and applications are investigated. The last chapter overviews the performances of cryogenic circuits and their applications. The low temperature properties and performance of inverters, multipliers, adders, operational amplifiers, memories, microprocessors, imaging devices, circuits and systems, sensors and read-out circuits are analyzed. Device and Circuit Cryogenic Operation for Low Temperature Electronics is useful for researchers, engineers, Ph.D. and M.S. students working in the field of advanced electron devices and circuits, new semiconductor materials, and low temperature electronics and physics.

This book provides a comprehensive review of the state-of-the-art in the development of new and innovative materials, and of advanced modeling and characterization methods for nanoscale CMOS devices.Leading global industry bodies including the International Technology Roadmap for Semiconductors (ITRS) have created a forecast of performance improvements that will be delivered in the foreseeable future – in the form of a roadmap that will lead to a substantial enlargement in the number of materials, technologies and device architectures used in CMOS devices. This book addresses the field of materials development, which has been the subject of a major research drive aimed at finding new ways to enhance the performance of semiconductor technologies. It covers three areas that will each have a dramatic impact on the development of future CMOS devices: global and local strained and alternative materials for high speed channels on bulk substrate and insulator; very low access resistance; and various high dielectric constant gate stacks for power scaling.The book also provides information on the most appropriate modeling and simulation methods for electrical properties of advanced MOSFETs, including ballistic transport, gate leakage, atomistic simulation, and compact models for single and multi-gate devices, nanowire and carbon-based FETs. Finally, the book presents an in-depth investigation of the main nanocharacterization techniques that can be used for an accurate determination of transport parameters, interface defects, channel strain as well as RF properties, including capacitance-conductance, improved split C-V, magnetoresistance, charge pumping, low frequency noise, and Raman spectroscopy.

This book offers a comprehensive review of the state-of-the-art in innovative Beyond-CMOS nanodevices for developing novel functionalities, logic and memories dedicated to researchers, engineers and students.  It particularly focuses on the interest of nanostructures and nanodevices (nanowires, small slope switches, 2D layers, nanostructured materials, etc.) for advanced More than Moore (RF-nanosensors-energy harvesters, on-chip electronic cooling, etc.) and Beyond-CMOS logic and memories applications.

This book offers a comprehensive review of the state-of-the-art in innovative Beyond-CMOS nanodevices for developing novel functionalities, logic and memories dedicated to researchers, engineers and students. The book will particularly focus on the interest of nanostructures and nanodevices (nanowires, small slope switches, 2D layers, nanostructured materials, etc.) for advanced More than Moore (RF-nanosensors-energy harvesters, on-chip electronic cooling, etc.) and Beyond-CMOS logic and memories applications.

This book provides readers with a comprehensive, state-of-the-art reference for miniaturized More-than-Moore systems with a broad range of functionalities that can be added to 3D microsystems, including flexible electronics, metasurfaces and power sources.

This book provides readers with a comprehensive, state-of-the-art reference for miniaturized More-than-Moore systems with a broad range of functionalities that can be added to 3D microsystems, including flexible electronics, metasurfaces and power sources.

This book contains reviews of recent experimental and theoretical results related to nanomaterials. It focuses on novel functional materials and nanostructures in combination with silicon on insulator (SOI) devices, as well as on the physics of new devices and sensors, nanostructured materials and nano scaled device characterization. Special attention is paid to fabrication and properties of modern low-power, high-performance, miniaturized, portable sensors in a wide range of applications such as telecommunications, radiation control, biomedical instrumentation and chemical analysis. In this book, new approaches exploiting nanotechnologies (such as UTBB FD SOI, Fin FETs, nanowires, graphene or carbon nanotubes on dielectric) to pave a way between “More Moore” and “More than Moore” are considered, in order to create different kinds of sensors and devices which will consume less electrical power, be more portable and totally compatible with modern microelectronics products.

This book contains reviews of recent experimental and theoretical results related to nanomaterials. It focuses on novel functional materials and nanostructures in combination with silicon on insulator (SOI) devices, as well as on the physics of new devices and sensors, nanostructured materials and nano scaled device characterization. Special attention is paid to fabrication and properties of modern low-power, high-performance, miniaturized, portable sensors in a wide range of applications such as telecommunications, radiation control, biomedical instrumentation and chemical analysis. In this book, new approaches exploiting nanotechnologies (such as UTBB FD SOI, Fin FETs, nanowires, graphene or carbon nanotubes on dielectric) to pave a way between “More Moore” and “More than Moore” are considered, in order to create different kinds of sensors and devices which will consume less electrical power, be more portable and totally compatible with modern microelectronics products.

"Semiconductor-On-Insulator Materials for NanoElectronics Applications” is devoted to the fast evolving field of modern nanoelectronics, and more particularly to the physics and technology of nanoelectronic devices built on semiconductor-on-insulator (SemOI) systems. The book contains the achievements in this field from leading companies and universities in Europe, USA, Brazil and Russia. It is articulated around four main topics: 1. New semiconductor-on-insulator materials; 2. Physics of modern SemOI devices; 3. Advanced characterization of SemOI devices; 4. Sensors and MEMS on SOI. "Semiconductor-On-Insulator Materials for NanoElectonics Applications” is useful not only to specialists in nano- and microelectronics but also to students and to the wider audience of readers who are interested in new directions in modern electronics and optoelectronics.