Minimizing the Use of Chemicals to Control Scaling in Sea Water Reverse Osmosis: Improved Prediction of the Scaling Potential of Calcium Carbonate

Dr Tarek Waly has 13 years experience in management, consultancy, sales, marketing and research in the water and wastewater treatment field. He is currently a lead R&D engineer at DOW Chemicals. He obtained his MSc from the UNESCO-IHE Institute for Water Education in Delft, and his Doctorate degree from the Delft University of Technology in Delft, The Netherlands.

• Chapter 11.1 Background 1.2 Problem definition 1.3 The Overall Aim of the research 1.4 Research objectives 1.5 ReferencesChapter 2 2.1 Abstract 2.2 Background IntroductionInduction timeMeasurement tools Effect of exchange CO2 on induction time 2.3 Materials Inductively coupled plasma Conductivity meter pH meter Reactors Synthetic seawater concentrate preparation2.4 MethodsMeasurement of calcium with ICP Salinity and accuracy of direct measurement of calcium in solutionMeasurement of calcium carbonate retained on membrane filters Effect of salinity, stability and accuracy of conductivity and pH measurment Effect of mixing on the induction time 2.5 ResultsEffect of salinity on the ICP measurements and accuracy Accuracy of measurement of calcium carbonate retained on membrane filters The effect of salinity on the conductivity and the pH measurments The effect of carbon dioxide exchange in an open system2.6 Conclusions 2.7 List of Symbols 2.8 References Chapter 3 3.1 Abstract 3.2 Background 3.3 Materials Synthetic seawater concentrate preparation3.4 Methods The effect of particles in synthetic seawater on the induction time The effect of particle addition Mixing effect 3.5 Results and discussion The effect of particles in synthetic seawater on the induction time The effect of particle addition The effect of mixing speed on the induction time The nucleation mechanism 3.6 Conclusions 3.7 List of symbols 3.8 References Chapter 4 4.1 Abstract 4.2 BackgroundIntroduction Solubility of salts Common methods used to determine the precipitation potential of CaCO3: Stiff & Davis Stability Index (S&DSI) Saturation Index (SI) Saturation Ratio (Sa) Mechanism of nucleation Homogenous nucleation Heterogeneous nucleation in a solution Induction time CaCO3 phases The formation of hydrated CaCO3 forms 4.3 Materials pH meter Reactors Synthetic seawater concentrate preparation 4.4 Methods Induction time measurements Solutions concentrations Calculation of SI using PhreeqC 4.5 Results The solubility product used by the S&DSI Homogenous and heterogeneous nucleation 4.6 Conclusions 4.7 List of symbols 4.8 References Chapter 5 5.1 Abstract 5.2 Introduction 5.3 Background Saturation indices Calculation of pH in SWRO concentrates Effect of salinity on dissociation constants Effect of salinity on the ion activity 5.4 Materials and Methods Pilot plant Concentrate pH in SWRO systems 5.5 Results and Discussion pH calculations using equilibrium equations pH calculations using manufacturers software pH prediction using Phreeqc evaporation model Field seawater concentrate measurements 5.6 Conclusions 5.6 List of Symbols5.7 References Chapter 66.1 Abstract 6.2 Background Introduction Calcium carbonate phases The role of inorganic ions Solubility of saltsCommon methods used to determine the precipitation potential of CaCO3: Saturation indices (SI and Sa) Mechanism of nucleation Induction time 6.3 MaterialspH meterReactors Synthetic seawater concentrate preparation 6.4 MethodsInduction time measurements Determination of co-precipitation Determination of the final crystal phase of calcium carbonate6.5 Results and discussionChapter 7 7.1 Conclusions7.2 Recommendations for future work