New Trends in Observer-based Control
A Practical Guide to Process and Engineering Applications
1 410 kr
Beställningsvara. Skickas inom 7-10 vardagar. Fri frakt över 249 kr.
Beskrivning
New Trends in Observer-Based Control: A Practical Guide to Process and Engineering Applications presents a concise introduction to the latest advances in observer-based control design. The book gives a comprehensive tutorial on new trends in the design of observer-based controllers for which the separation principle is well established. It covers a wide range of applications, also including worked examples that make it ideal for both advanced courses and researchers starting work in the field. This book is also particularly suitable for engineers who want to quickly and efficiently enter the field.
- Presents a clear-and-concise introduction to the latest advances in observer-based control design
- Offers content on many facets of observer-based control design
- Discusses key applications in the fields of power systems, robotics and mechatronics, flight and automotive systems
Produktinformation
- Utgivningsdatum:2019-08-09
- Mått:152 x 229 x 21 mm
- Vikt:520 g
- Format:Häftad
- Språk:Engelska
- Serie:Emerging Methodologies and Applications in Modelling, Identification and Control
- Antal sidor:309
- Förlag:Elsevier Science
- ISBN:9780128170342
Utforska kategorier
Mer om författaren
Olfa Boubaker is a Full Professor at the National Institute of Applied Sciences and Technology (INSAT) at the University of Carthage, Tunisia. Her research spans control theory, nonlinear systems, and robotics, with a focus on healthcare applications and human-centered technologies. She received her PhD in Electrical Engineering from the National Engineering School of Tunis (ENIT) and Habilitation Universitaire degree in Control Engineering from the National Engineering School of Sfax (ENIS), in Tunisia. Professor Boubaker leads interdisciplinary research projects at the interface of medicine and technology and serves as Series Editor of Medical Robots and Devices: New Developments and Advances. She has authored over 150 peer-reviewed papers and several books, and is an Associate Editor for Robotica and the International Journal of Advanced Robotic Systems. She also contributes to various scientific journals and mentors numerous engineering graduates. Quanmin Zhu is Professor of control systems at the Department of Engineering Design and Mathematics, University of the West of England, Bristol, UK. He obtained his MSc in Harbin Institute of Technology, China in 1983 and Ph.D. in Faculty of Engineering, University of Warwick, UK in 1989. His main research interest is in the area of nonlinear system modelling, identification, and control. His other research interest is in investigating electrodynamics of acupuncture points and sensory stimulation effects in human body, modelling of human meridian systems, and building up electro-acupuncture instruments. He has published over 200 papers on these topics, edited five Springer books and one book for the other publisher, and provided consultancy to various industries. Currently, Professor Zhu is acting as Editor of International Journal of Modelling, Identification and Control, Editor of International Journal of Computer Applications in Technology, Member of Editorial Committee of Chinese Journal of Scientific Instrument, and editor of Elsevier book series of Emerging Methodologies and Applications in Modelling, Identification and Control. He is the founder and president of series annual International Conference on Modelling, Identification and Control. MagdiSadek Mahmoud obtained B. Sc. (Honors) in communication engineering, M. Sc. in electronic engineering and Ph. D. in systems engineering, all from Cairo University in 1968, 1972 and 1974, respectively. He has been a professor of engineering since 1984. He is now a Distinguished Professor at KFUPM, Saudi Arabia. He was on the faculty at different universities worldwide including Egypt (CU, AUC), Kuwait (KU), UAE (UAEU), UK (UMIST), USA (Pitt, Case Western), Singapore (Nanyang) and Australia (Adelaide). He lectured in Venezuela (Caracas), Germany (Hanover), UK ((Kent), USA (UoSA), Canada (Montreal) and China (BIT, Yanshan). He is the principal author of forty-six (46) books, inclusive book-chapters and the author/co-author of more than 580 peer-reviewed papers. He is currently actively engaged in teaching and research in the development of modern methodologies to distributed control and filtering, networked-control systems, triggering mechanisms in dynamical systems, renewable-energy systems, and information technology. He is a fellow of the IEE, a senior member of the IEEE, a member of Sigma Xi, the CEI (UK), the Egyptian Engineers society, the Kuwait Engineers society and a registered consultant engineer of information engineering and systems (Egypt). José RAGOT received the "Diplome d'Ingénieur" (Engineer Degree) with specialization in control from the Ecole Centrale de Nantes (France) in 1969. Then, he joined the University of Nancy (France) where is received the "Diplôme d'Etudes Approfondies" (Master Degree) in 1970. In 1973 he obtained the "Diplôme de Doctorat" (Ph. D. degree), a position as assistant professor at University Henri Poincaré in Nancy, and in 1980 the "Diplôme de Doctorat-es-Sciences". José Ragot moved up to professor in 1985 at the Institut National Polytechnique de Lorraine (INPL, National Polytechnic Institute of Lorraine). His major research fields include data validation and reconciliation, process diagnosis, fault detection, and isolation. Another part of his activities is devoted to modelisation and state estimation adapted to process diagnosis and mainly in the field of multi-models. Prof. Ragot is a researcher in the "Centre de Recherche en Automatique de Nancy" (CRAN, CNRS UMR 7039) where he was the head of the group "process diagnosis" during 12 years. Presently he is an Emeritus Professor (with the degree "Classe Exceptionnelle") at the "Ecole Nationale Supérieure de Géologie" (french "Grande Ecole") where he has been in charge the formation in automatic control. Dr. Karimi received the B.Sc. (First Hons.) degree in power systems from the Sharif University of Technology, Tehran, Iran, in 1998, and the M.Sc. and Ph.D. (First Hons.) degrees in control systems engineering from the University of Tehran, Tehran, in 2001 and 2005, respectively. His research interests are in the areas of control systems/theory, mechatronics, networked control systems, intelligent control systems, signal processing, vibration control, ground vehicles, structural control, wind turbine control and cutting processes. He is an Editorial Board Member for some international journals and several Technical Committee. Prof. Karimi has been presented a number of national and international awards, including Alexander-von-Humboldt Research Fellowship Award (in Germany), JSPS Research Award (in Japan), DAAD Research Award (in Germany), August-Wilhelm-Scheer Award (in Germany) and been invited as visiting professor at a number of universities in Germany, France, Italy, Poland, Spain, China, Korea, Japan, India. Jorge Dávila received the Ph.D. degree (2008) in Electrical Engineering from the National Autonomous University of Mexico (UNAM). He was awarded the Alfonso Caso Medal to the best Ph.D. student of the National Autonomous University of Mexico, UNAM, in 2010.Prof. Dávila is a member of the Mexican National Research System, since January 2010, and he was awarded the distinction of National Researcher Level 2. He has published 27 journal articles, coauthored five book chapters and contributed with 68 conference papers. His works in observation, identification, and control of linear and nonlinear systems have been cited more than 1400 times (source: SCOPUS), he possesses h-index=16. Prof. Dávila was guest editor of the Special Issue: “Variable Structure Methods for Hybrid Systems, International Journal of Systems Science, Volume 42, Issue 11, 2011. And currently is associate Editor of the Conference Editorial Board of IEEE Control Systems Society (since 2016).
Innehållsförteckning
- Part I. Power Systems1. Active Load Reduction in Large Scale Wind Turbines using Non-linear Quadratic Disturbance Observer2. Observer-Based Controller of Analytical Complex Systems- Application for a Large Scale Power System3. Robust Control for Wind Turbines using Sliding Modes based Compensation4. Meta Heuristic Optimized control strategies for Hybrid DC- AC systems5. Distributed Nonlinear Control of MicrogridsPart II. Robotics and Mechatronics6. Finite Time Observer Design for Nonholonomic Systems7. Robust Observer-based Stabilization for Constrained Robots with Force and Parameter Estimation: Application to the ABB-IRB 140 Industrial Robot8. Design of a Composite Control in Two-time Scale using Disturbance State Observer based SMC and Backstepping Control of a Two-link Flexible Manipulator9. Robust Observer-based Control of the Inverted Pendulum System Subject to Communication DelaysPart III. Flight and Automotive dynamics10. A class of Nonlinear Unknown Input Observers under L2-gain performance for Fault Diagnosis: Application to the Mars Sample Return mission11. A Class of Reduced-order Multiple Observers with Applications to Aircraft Landing12. Disturbance Observer-Based Control of Spacecraft Attitude Dynamics Subject to Perturbations and Underactuation13. Actuator or/and Sensor Fault Detection Based on LPV Unknown Input Observer Applied to Lateral Vehicle DynamicsPart IV. Bio-Industry14. Observer-Based Trajectory Tracking for an Anaerobic Digestion Process by Using New LMI Method
Betyg & recensioner
0/5
Betyg & recensioner
Du kanske också är intresserad av
Consensus Tracking of Multi-agent Systems with Switching Topologies
Lijing Dong, Sing Kiong Nguang
1 446 kr
Parameter Estimation and Adaptive Control for Nonlinear Servo Systems
Shubo Wang, Jing Na, Xuemei Ren
1 544 kr
Modeling, Identification, and Control for Cyber- Physical Systems Towards Industry 4.0
Paolo Mercorelli, Weicun Zhang, Hamidreza Nemati, YuMing Zhang
1 410 kr
Advanced Seat Suspension Control System Design for Heavy Duty Vehicles
Haiping Du, Weihua Li, Donghong Ning, Shuaishuai Sun
1 727 kr
Vibration Control and Actuation of Large-Scale Systems
Hamid Reza Karimi, Italy) Karimi, Hamid Reza (Professor of Applied Mechanics, Department of Mechanical Engineering, Politecnico di Milano, Milan
1 446 kr
Control and Game Theoretic Methods for Cyber-Physical Security
Aris Kanellopoulos, Lijing Zhai, Filippos Fotiadis, Kyriakos Vamvoudakis
1 410 kr
Composite Disturbance Rejection Control (CDRC) for Complex Dynamic Systems
Jinhui Zhang
1 995 kr