Jean J. Labrosse is a senior technical staff member at Dynalco Controls in Fort Lauderdale, Fla. He has a master's degree in electrical engineering and has been designing embedded systems for many years. Labrosse is the author of the popular operating system and book MicroC/OS-II: The Real-Time Kernel. He has written articles for numerous magazines, and is a regular lecturer and advisory board member for the Embedded Systems Conference. Jack Ganssle has 30 years' experience developing embedded systems. He has authored two books, The Art of Programming Embedded Systems and The Art of Designing Embedded Systems, and writes a regular column in Embedded Systems Programming magazine. Michael Barr is the editor-in-chief of Embedded Systems Programming magazine and the principal of Netrino Consultants Network. He wrote Programming Embedded Systems in C and C++. Rob Oshana has over 25 years of experience in the real-time embedded industry, in both embedded application development as well as embedded tools development. He is currently director of engineering for the Development Technology group at Freescale Semiconductor. Rob is also a Senior Member of IEEE and an adjunct at Southern Methodist University. He can be contacted at robert.oshana@freescale.com Colin Walls has over forty years' experience in the electronics industry, largely involved with embedded software - very much a pioneer in this specialty.He has been a frequent presenter at conferences and seminars including:• Embedded Systems Conference, San Jose and Boston• Embedded World, Nuremberg• Arm Tech Con, California• Mentor events world-wide• Numerous partner eventsColin has authored a great many technical articles and one of the first books on embedded software ["Programming Dedicated Microprocessors"; Macmillan Education, 1986]. His most recent publication is "Embedded Software: The Works" [2nd edition; Newnes, 2012], which addresses a wide range of embedded software topics.He is an embedded software technologist with Mentor, a Siemens business, and maintains a blog at http://blogs.mentor.com/colinwalls. Colin is based in the UK, where he lives with his family. Away from work, his main interests are photography, reading/writing, and food and drink. Keith E. Curtis earned a BSEE from Montana State University. Following graduation, he was employed by Tele-Tech Corporation as a design and project engineer, and also began consulting part-time as an embedded engineer. He was then employed by Bally Gaming in Las Vegas as an engineer and later the electronics engineering manager, working for various Nevada gaming companies in both design and management. In 2000 he began work as a Principal Application Engineer for Microchip, where he is still employed.He has written a number of articles and regularly gives a popular course on multitasking firmware design at the Embedded Systems Conference. Jason Andrews is currently working in the areas of hardware/software co-verification and testbench methodology for SoC design at Verisity. He has implemented multiple commercial co-verification tools as well as many custom co-verification solutions. His experience in the EDA and embedded marketplace includes software development and product management at Verisity, Axis Systems, Simpod, Summit Design, and Simulation Technologies. He has presented technical papers and tutorials at the Embedded Systems Conference, Communication Design Conference and IP/SoC and written numerous articles related to HW/SW co-verification and design verification. He has a B.S. in electrical engineering from The Citadel, Charleston, S.C., and an M.S. in electrical engineering from the University of Minnesota. He currently lives in the Minneapolis area with his wife, Deborah, and their four children. Rick Gentile joined ADI in 2000 as a Senior DSP Applications Engineer, and he currently leads the Processor Applications Group, which is responsible for Blackfin, SHARC and TigerSHARC processors. Prior to joining ADI, Rick was a Member of the Technical Staff at MIT Lincoln Laboratory, where he designed several signal processors used in a wide range of radar sensors. He has authored dozens of articles and presented at multiple technical conferences. He received a B.S. in 1987 from the University of Massachusetts at Amherst and an M.S. in 1994 from Northeastern University, both in Electrical and Computer Engineering.

• Chapter 1: Basic Embedded Programming ConceptsChapter 2: Device DriversChapter 3: Embedded Operating SystemsChapter 4: NetworkingChapter 5: Error Handling and DebuggingChapter 6: Hardware/Software Co-VerificationChapter 7: Techniques for Embedded Media ProcessingChapter 8: DSP in Embedded SystemsChapter 9: Practical Embedded Coding TechniquesChapter 10: Development Technologies and Trends

Jean J. Labrosse is a senior technical staff member at Dynalco Controls in Fort Lauderdale, Fla. He has a master's degree in electrical engineering and has been designing embedded systems for many years. Labrosse is the author of the popular operating system and book MicroC/OS-II: The Real-Time Kernel. He has written articles for numerous magazines, and is a regular lecturer and advisory board member for the Embedded Systems Conference. Jack Ganssle has 30 years' experience developing embedded systems. He has authored two books, The Art of Programming Embedded Systems and The Art of Designing Embedded Systems, and writes a regular column in Embedded Systems Programming magazine. Michael Barr is the editor-in-chief of Embedded Systems Programming magazine and the principal of Netrino Consultants Network. He wrote Programming Embedded Systems in C and C++. Rob Oshana has over 25 years of experience in the real-time embedded industry, in both embedded application development as well as embedded tools development. He is currently director of engineering for the Development Technology group at Freescale Semiconductor. Rob is also a Senior Member of IEEE and an adjunct at Southern Methodist University. He can be contacted at robert.oshana@freescale.com Colin Walls has over forty years' experience in the electronics industry, largely involved with embedded software - very much a pioneer in this specialty.He has been a frequent presenter at conferences and seminars including:• Embedded Systems Conference, San Jose and Boston• Embedded World, Nuremberg• Arm Tech Con, California• Mentor events world-wide• Numerous partner eventsColin has authored a great many technical articles and one of the first books on embedded software ["Programming Dedicated Microprocessors"; Macmillan Education, 1986]. His most recent publication is "Embedded Software: The Works" [2nd edition; Newnes, 2012], which addresses a wide range of embedded software topics.He is an embedded software technologist with Mentor, a Siemens business, and maintains a blog at http://blogs.mentor.com/colinwalls. Colin is based in the UK, where he lives with his family. Away from work, his main interests are photography, reading/writing, and food and drink. Keith E. Curtis earned a BSEE from Montana State University. Following graduation, he was employed by Tele-Tech Corporation as a design and project engineer, and also began consulting part-time as an embedded engineer. He was then employed by Bally Gaming in Las Vegas as an engineer and later the electronics engineering manager, working for various Nevada gaming companies in both design and management. In 2000 he began work as a Principal Application Engineer for Microchip, where he is still employed.He has written a number of articles and regularly gives a popular course on multitasking firmware design at the Embedded Systems Conference. Jason Andrews is currently working in the areas of hardware/software co-verification and testbench methodology for SoC design at Verisity. He has implemented multiple commercial co-verification tools as well as many custom co-verification solutions. His experience in the EDA and embedded marketplace includes software development and product management at Verisity, Axis Systems, Simpod, Summit Design, and Simulation Technologies. He has presented technical papers and tutorials at the Embedded Systems Conference, Communication Design Conference and IP/SoC and written numerous articles related to HW/SW co-verification and design verification. He has a B.S. in electrical engineering from The Citadel, Charleston, S.C., and an M.S. in electrical engineering from the University of Minnesota. He currently lives in the Minneapolis area with his wife, Deborah, and their four children. Rick Gentile joined ADI in 2000 as a Senior DSP Applications Engineer, and he currently leads the Processor Applications Group, which is responsible for Blackfin, SHARC and TigerSHARC processors. Prior to joining ADI, Rick was a Member of the Technical Staff at MIT Lincoln Laboratory, where he designed several signal processors used in a wide range of radar sensors. He has authored dozens of articles and presented at multiple technical conferences. He received a B.S. in 1987 from the University of Massachusetts at Amherst and an M.S. in 1994 from Northeastern University, both in Electrical and Computer Engineering.

• Chapter 1: Basic Embedded Programming ConceptsChapter 2: Device DriversChapter 3: Embedded Operating SystemsChapter 4: NetworkingChapter 5: Error Handling and DebuggingChapter 6: Hardware/Software Co-VerificationChapter 7: Techniques for Embedded Media ProcessingChapter 8: DSP in Embedded SystemsChapter 9: Practical Embedded Coding TechniquesChapter 10: Development Technologies and Trends

Jean J. Labrosse is a senior technical staff member at Dynalco Controls in Fort Lauderdale, Fla. He has a master's degree in electrical engineering and has been designing embedded systems for many years. Labrosse is the author of the popular operating system and book MicroC/OS-II: The Real-Time Kernel. He has written articles for numerous magazines, and is a regular lecturer and advisory board member for the Embedded Systems Conference. Jack Ganssle has 30 years' experience developing embedded systems. He has authored two books, The Art of Programming Embedded Systems and The Art of Designing Embedded Systems, and writes a regular column in Embedded Systems Programming magazine. Michael Barr is the editor-in-chief of Embedded Systems Programming magazine and the principal of Netrino Consultants Network. He wrote Programming Embedded Systems in C and C++. Rob Oshana has over 25 years of experience in the real-time embedded industry, in both embedded application development as well as embedded tools development. He is currently director of engineering for the Development Technology group at Freescale Semiconductor. Rob is also a Senior Member of IEEE and an adjunct at Southern Methodist University. He can be contacted at robert.oshana@freescale.com Colin Walls has over forty years' experience in the electronics industry, largely involved with embedded software - very much a pioneer in this specialty.He has been a frequent presenter at conferences and seminars including:• Embedded Systems Conference, San Jose and Boston• Embedded World, Nuremberg• Arm Tech Con, California• Mentor events world-wide• Numerous partner eventsColin has authored a great many technical articles and one of the first books on embedded software ["Programming Dedicated Microprocessors"; Macmillan Education, 1986]. His most recent publication is "Embedded Software: The Works" [2nd edition; Newnes, 2012], which addresses a wide range of embedded software topics.He is an embedded software technologist with Mentor, a Siemens business, and maintains a blog at http://blogs.mentor.com/colinwalls. Colin is based in the UK, where he lives with his family. Away from work, his main interests are photography, reading/writing, and food and drink. Keith E. Curtis earned a BSEE from Montana State University. Following graduation, he was employed by Tele-Tech Corporation as a design and project engineer, and also began consulting part-time as an embedded engineer. He was then employed by Bally Gaming in Las Vegas as an engineer and later the electronics engineering manager, working for various Nevada gaming companies in both design and management. In 2000 he began work as a Principal Application Engineer for Microchip, where he is still employed.He has written a number of articles and regularly gives a popular course on multitasking firmware design at the Embedded Systems Conference. Jason Andrews is currently working in the areas of hardware/software co-verification and testbench methodology for SoC design at Verisity. He has implemented multiple commercial co-verification tools as well as many custom co-verification solutions. His experience in the EDA and embedded marketplace includes software development and product management at Verisity, Axis Systems, Simpod, Summit Design, and Simulation Technologies. He has presented technical papers and tutorials at the Embedded Systems Conference, Communication Design Conference and IP/SoC and written numerous articles related to HW/SW co-verification and design verification. He has a B.S. in electrical engineering from The Citadel, Charleston, S.C., and an M.S. in electrical engineering from the University of Minnesota. He currently lives in the Minneapolis area with his wife, Deborah, and their four children. Rick Gentile joined ADI in 2000 as a Senior DSP Applications Engineer, and he currently leads the Processor Applications Group, which is responsible for Blackfin, SHARC and TigerSHARC processors. Prior to joining ADI, Rick was a Member of the Technical Staff at MIT Lincoln Laboratory, where he designed several signal processors used in a wide range of radar sensors. He has authored dozens of articles and presented at multiple technical conferences. He received a B.S. in 1987 from the University of Massachusetts at Amherst and an M.S. in 1994 from Northeastern University, both in Electrical and Computer Engineering.

• Chapter 1: Basic Embedded Programming ConceptsChapter 2: Device DriversChapter 3: Embedded Operating SystemsChapter 4: NetworkingChapter 5: Error Handling and DebuggingChapter 6: Hardware/Software Co-VerificationChapter 7: Techniques for Embedded Media ProcessingChapter 8: DSP in Embedded SystemsChapter 9: Practical Embedded Coding TechniquesChapter 10: Development Technologies and Trends