Select Guide Rating

• Part I. Characterization of Materials by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Differential Scanning Calorimetry (DSC): 1. Synthesis and determination of thermodynamical properties of the compounds of the system Ca-Mg-Bi C. Ramírez, J. A. Romero, A. Hernández and F. Pérez; 2. Study of the synthesis of mullite from kaolin-a-Al2O3 and kaolin-Al(NO3)3 E. M. Lozada, O. Alanís, F. Legorreta and L. E. Hernández; 3. Particle size characterization of commercial raw materials and graphite nanoparticles of a refractory bricks mix of the system Al2O3-SiC-C A. M. Paniagua, J. Martinez, V. Mauro and E. Diaz; Part II. Characterization of Materials by Differential Thermal Analysis (DTA), Thermogravimetry (TGA), Fourier Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and Raman Spectroscopy: 4. Preparation of lithium aluminum layered double hydroxide from ammonium dawsonite and lithium carbonate C. A. Contreras Soto, E. Ramos-Ramírez, V. Reyes Zamudio and J. I. Macías; 5. Study of optical vibration modes of mineral graphite by micro Raman spectroscopy R. A. Silva-Molina, R. Gámez-Corrales, J. M. Hernández-Cazares and I. G. Espinoza-Maldonado; 6. Chemical precipitation synthesis of nano-crystalline Mg(OH)2 A. Medina, L. Béjar and G. Herrera-Pérez; Part III. Mechanical and Microstructural Characterization of Steels Used in the Oil Industry: 7. Effect of the aging treatment in micro-alloyed steel M. A. Doñu Ruiz, J. A. Ortega Herrera, N. López Perrusquia, V. J. Cortés Suárez and L. D. Rosado Cruz; 8. Characterization of microstructural and mechanical properties of X-60 steel heat-treated N. López Perrusquia, J. A. Ortega Herrera, M. A. Doñu Ruiz, V. J. Cortés Suárez and L. D. Cruz Rosado; 9. Tension tests behavior of API 5L X60 pipeline steel in a simulated soil solution to evaluate SCC susceptibility A. Contreras, S. L. Hernández, R. Galvan-Martinez and O. Vega-Becerra; Part IV. Characterization of Materials for Industrial Applications: 10. Vacuum forming of aluminum scrap J. A. Garabito, H. Granados, V. H. López, A. R. Kennedy and J. E. Bedolla; 11. Study of the thermoluminescent characteristics of ceramic roof tiles exposed to beta radiation A. R. García-Haro, R. Bernal, C. Cruz-Vázquez, S. E. Burruel-Ibarra, V. R. Orante-Barrón and F. Brown; 12. Evaluation of resistance spot welding conditions using experimental design D. Y. Medina, R. Bermejo, R. T. Hernandez, I. Hernandez and S. Orozco; Part V. Characterization of Materials Used in Coatings and Thin Films: 13. Diffusion of hard coatings on ductile cast iron N. López Perrusquia, M. Antonio Doñu Ruiz, E. Y. Vargas Oliva and V. J. Cortés Suárez; 14. Luminescence in a Ba(Ti,Zr)O3 film deposited by ultrasonic spray pyrolysis method D. Y. Medina, R. T. Hernández, I. Hernández and S. Orozco; Part VI. Microstructural Characterization of Nanostructured Materials: 15. Characterization on fracture surfaces of 304 stainless steels joined by brazing using silicon nanoparticles L. Santiago-Bautista, H. M. Hernández-García, R. Muñoz-Arroyo, M. Garza-Castañón, F. García-Vázquez and J. Acevedo-Dávila; 16. Synthesis of ZnO at different atomic proportions produced by chemical precipitation A. Medina, L. Béjar and G. Herrera-Pérez.

Select Guide Rating

• Part I. Characterization of Materials by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Differential Scanning Calorimetry (DSC): 1. Synthesis and determination of thermodynamical properties of the compounds of the system Ca-Mg-Bi C. Ramírez, J. A. Romero, A. Hernández and F. Pérez; 2. Study of the synthesis of mullite from kaolin-a-Al2O3 and kaolin-Al(NO3)3 E. M. Lozada, O. Alanís, F. Legorreta and L. E. Hernández; 3. Particle size characterization of commercial raw materials and graphite nanoparticles of a refractory bricks mix of the system Al2O3-SiC-C A. M. Paniagua, J. Martinez, V. Mauro and E. Diaz; Part II. Characterization of Materials by Differential Thermal Analysis (DTA), Thermogravimetry (TGA), Fourier Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and Raman Spectroscopy: 4. Preparation of lithium aluminum layered double hydroxide from ammonium dawsonite and lithium carbonate C. A. Contreras Soto, E. Ramos-Ramírez, V. Reyes Zamudio and J. I. Macías; 5. Study of optical vibration modes of mineral graphite by micro Raman spectroscopy R. A. Silva-Molina, R. Gámez-Corrales, J. M. Hernández-Cazares and I. G. Espinoza-Maldonado; 6. Chemical precipitation synthesis of nano-crystalline Mg(OH)2 A. Medina, L. Béjar and G. Herrera-Pérez; Part III. Mechanical and Microstructural Characterization of Steels Used in the Oil Industry: 7. Effect of the aging treatment in micro-alloyed steel M. A. Doñu Ruiz, J. A. Ortega Herrera, N. López Perrusquia, V. J. Cortés Suárez and L. D. Rosado Cruz; 8. Characterization of microstructural and mechanical properties of X-60 steel heat-treated N. López Perrusquia, J. A. Ortega Herrera, M. A. Doñu Ruiz, V. J. Cortés Suárez and L. D. Cruz Rosado; 9. Tension tests behavior of API 5L X60 pipeline steel in a simulated soil solution to evaluate SCC susceptibility A. Contreras, S. L. Hernández, R. Galvan-Martinez and O. Vega-Becerra; Part IV. Characterization of Materials for Industrial Applications: 10. Vacuum forming of aluminum scrap J. A. Garabito, H. Granados, V. H. López, A. R. Kennedy and J. E. Bedolla; 11. Study of the thermoluminescent characteristics of ceramic roof tiles exposed to beta radiation A. R. García-Haro, R. Bernal, C. Cruz-Vázquez, S. E. Burruel-Ibarra, V. R. Orante-Barrón and F. Brown; 12. Evaluation of resistance spot welding conditions using experimental design D. Y. Medina, R. Bermejo, R. T. Hernandez, I. Hernandez and S. Orozco; Part V. Characterization of Materials Used in Coatings and Thin Films: 13. Diffusion of hard coatings on ductile cast iron N. López Perrusquia, M. Antonio Doñu Ruiz, E. Y. Vargas Oliva and V. J. Cortés Suárez; 14. Luminescence in a Ba(Ti,Zr)O3 film deposited by ultrasonic spray pyrolysis method D. Y. Medina, R. T. Hernández, I. Hernández and S. Orozco; Part VI. Microstructural Characterization of Nanostructured Materials: 15. Characterization on fracture surfaces of 304 stainless steels joined by brazing using silicon nanoparticles L. Santiago-Bautista, H. M. Hernández-García, R. Muñoz-Arroyo, M. Garza-Castañón, F. García-Vázquez and J. Acevedo-Dávila; 16. Synthesis of ZnO at different atomic proportions produced by chemical precipitation A. Medina, L. Béjar and G. Herrera-Pérez.

Select Guide Rating

• Part I. Characterization of Materials by X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and Differential Scanning Calorimetry (DSC): 1. Synthesis and determination of thermodynamical properties of the compounds of the system Ca-Mg-Bi C. Ramírez, J. A. Romero, A. Hernández and F. Pérez; 2. Study of the synthesis of mullite from kaolin-a-Al2O3 and kaolin-Al(NO3)3 E. M. Lozada, O. Alanís, F. Legorreta and L. E. Hernández; 3. Particle size characterization of commercial raw materials and graphite nanoparticles of a refractory bricks mix of the system Al2O3-SiC-C A. M. Paniagua, J. Martinez, V. Mauro and E. Diaz; Part II. Characterization of Materials by Differential Thermal Analysis (DTA), Thermogravimetry (TGA), Fourier Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and Raman Spectroscopy: 4. Preparation of lithium aluminum layered double hydroxide from ammonium dawsonite and lithium carbonate C. A. Contreras Soto, E. Ramos-Ramírez, V. Reyes Zamudio and J. I. Macías; 5. Study of optical vibration modes of mineral graphite by micro Raman spectroscopy R. A. Silva-Molina, R. Gámez-Corrales, J. M. Hernández-Cazares and I. G. Espinoza-Maldonado; 6. Chemical precipitation synthesis of nano-crystalline Mg(OH)2 A. Medina, L. Béjar and G. Herrera-Pérez; Part III. Mechanical and Microstructural Characterization of Steels Used in the Oil Industry: 7. Effect of the aging treatment in micro-alloyed steel M. A. Doñu Ruiz, J. A. Ortega Herrera, N. López Perrusquia, V. J. Cortés Suárez and L. D. Rosado Cruz; 8. Characterization of microstructural and mechanical properties of X-60 steel heat-treated N. López Perrusquia, J. A. Ortega Herrera, M. A. Doñu Ruiz, V. J. Cortés Suárez and L. D. Cruz Rosado; 9. Tension tests behavior of API 5L X60 pipeline steel in a simulated soil solution to evaluate SCC susceptibility A. Contreras, S. L. Hernández, R. Galvan-Martinez and O. Vega-Becerra; Part IV. Characterization of Materials for Industrial Applications: 10. Vacuum forming of aluminum scrap J. A. Garabito, H. Granados, V. H. López, A. R. Kennedy and J. E. Bedolla; 11. Study of the thermoluminescent characteristics of ceramic roof tiles exposed to beta radiation A. R. García-Haro, R. Bernal, C. Cruz-Vázquez, S. E. Burruel-Ibarra, V. R. Orante-Barrón and F. Brown; 12. Evaluation of resistance spot welding conditions using experimental design D. Y. Medina, R. Bermejo, R. T. Hernandez, I. Hernandez and S. Orozco; Part V. Characterization of Materials Used in Coatings and Thin Films: 13. Diffusion of hard coatings on ductile cast iron N. López Perrusquia, M. Antonio Doñu Ruiz, E. Y. Vargas Oliva and V. J. Cortés Suárez; 14. Luminescence in a Ba(Ti,Zr)O3 film deposited by ultrasonic spray pyrolysis method D. Y. Medina, R. T. Hernández, I. Hernández and S. Orozco; Part VI. Microstructural Characterization of Nanostructured Materials: 15. Characterization on fracture surfaces of 304 stainless steels joined by brazing using silicon nanoparticles L. Santiago-Bautista, H. M. Hernández-García, R. Muñoz-Arroyo, M. Garza-Castañón, F. García-Vázquez and J. Acevedo-Dávila; 16. Synthesis of ZnO at different atomic proportions produced by chemical precipitation A. Medina, L. Béjar and G. Herrera-Pérez.