Azman Ismail is a senior lecturer at Malaysian Institute of Marine Engineering Technology, Universiti Kuala Lumpur, Malaysia. He received his PhD in Mechanical Engineering from Universiti Teknologi PETRONAS, and Master of Engineering in Mechanical-Marine Technology from Universiti Teknologi Malaysia. Prior to that, he was awarded a Bachelor of Engineering (Hons) in Electrical, Electronics and System from Universiti Kebangsaan Malaysia and Graduate Diploma in Industrial Education and Training from the Royal Melbourne Institute of Technology, Australia. He grooms his technical skill at Victoria University of Technology, Australia for Advanced Diploma in Construction and Repair Technology (Marine Vessels). He is also active in research and development for welding and joining technologies especially for friction stir welding on tubular sections and flat panels. This also includes green technologies for sustainable marine and coastal development. He is currently leading a research cluster of Advanced Maritime Industries Sustainability at his university. He has published his research findings in indexed journals and book chapters and actively competes at international and national level innovation competitions. In addition to his achievements, he has been a reviewer and editor for some international journals including Springer. Besides that, he is also active in conservation works as committee member for the National Eco-Campus Program with the World Wide Fund for Nature of Malaysia (WWF-Malaysia).Wardiah Mohd Dahalan had received her PhD in Power System from the University of Malaya, Kuala Lumpur, Malaysia in 2013 and bachelor’s degree (Hons) in Electrical & Electronics Engineering from University of Dundee, Scotland, UK in 1996. She is currently appointed as a Senior Lecturer at the Department of Marine Electrical and Electronics Engineering of University Kuala Lumpur (UniKL-MIMET). As the head of Research & Innovation department since 2015, she actively administers all research activities in UniKL-MIMET. Supervising of internal and external research grants and organization of all activities related to innovation such as exhibitions, competition and conferences are her core activities at UniKL-MIMET. She actively participates in research as a principle or co–principle in many research grants. At the same time, she also shares her expertise by becoming either the author or co-author of the publications of local as well as international journals, books and proceedings especially in the area of power system and energy. Her deep research interest includes network reconfiguration, Optimization Techniques and renewable energy. She is also a member of IEEE, Rina-IMARest, Malaysian Society for Engineering & Technology (MySET) and Malaysia Board of Technologist (MBOT).Andreas Öchsner is a Full Professor for lightweight design and structural simulation at the Esslingen University of Applied Sciences, Germany. Having obtained aDipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart (1997), Germany, he served as a research and teaching assistant at the University of Erlangen-Nuremberg from 1997 to 2003 while working to complete his Doctor of Engineering Sciences (Dr.-Ing.) degree. From 2003 to 2006, he was an Assistant Professor at the Department of Mechanical Engineering and Head of the Cellular Metals Group affiliated with the University of Aveiro, Portugal. He spent seven years (2007–2013) as a Full Professor at the Department of Applied Mechanics, Technical University of Malaysia, where he was also Head of the Advanced Materials and Structure Lab. From 2014-2017 he was a Full Professor at the School of Engineering, Griffith University, Australia and Leader of the Mechanical Engineering Program (Head of Discipline and Program Director).

• Green Composites Reinforced with Natural Fiber: A Review on Mechanical Properties.- Assessment on Maritime Research and Education for Graduate Employability and Sustainability: A Case Study in Faculty of Maritime Studies, Universiti Malaysia Terengganu".- Performance Evaluation of Malaysia’s Maritime Business Companies During Covid 19 with Topsis.- Issues in Legal Guidelines for Armed Guard on Board Vessels.- SWOT and TOWS Matrix Analysis: A Study on Ro-Ro Port Klang Malaysia.- Green Port Performance Indicators for Dry Bulk Terminals: A Review.- Development of Project Management Timeline and Material Buyout Application to Ship Construction Planning: A Review.- A Study of “Perahu Kolek” in Kelantan: Design, Material and Boat Building.- Green Shipbuilding Technology for Boustead Naval Shipyard Sdn Bhd Towards Sustainable Shipbuilding Development.- Ship Wave Resistance by Final Root Method of Solution with Corrections of Block Coefficients and Angleof Entrance.- Comparative Study of Ship Wave Resistance by Various Methods of Solution.- Effect of Cold Forging on Wire Arc Additive Manufactured Profile for Repair Purposes.- Investigation of Mesh Size Effect on FRP Confined Concrete Column Simulation Using Finite Element Analysis.- An Efficient Direct Diagonal Hybrid Block Method for Stiff Second-order Differential Equations.- The Investigation on the Effect of the Bulbous Bow Shape to the Resistance Components and Wave Profiles of Small Ships.- The Strength Analysis of Submersible Drone Hull Structure.- The Conceptual Design of Submersible Drone for Seabed Profiling.- Development of Smart Traffic Light Control System Using PLC and IoT for Emergency Vehicle Passed Through.- The Strength Analysis of Leisure Craft with Transparent Hull.- The Conceptual Design of Leisure Craft with Transparent Hull.- Water Quality Assessment on Difference Depth at Sungai Manjung, Perak.- Monitoring Air Quality Using an IoT-Enabled Air Pollution System On Smartphone.- Introduction of Futuristic Warehouse Synergy: A Warehouse Storage Space Reservation Hub System.- The Analysis of Barge Bridge Collision Response.- - Navigating The Blockchain Trilemma: A Supply Chain Dilemma.- Innovative approach for biomimicry of marine animals for development of engineering device.- Water Retention Properties of Fused Deposition Modeling (FDM) based 3D Printed Polylactic Acid (PLA) Vessel.- The Effect of Compaction Pressure and Sintering Temperature on the Properties of Sayong Ball Clay Membrane.- Determination of Design Specification for Sungai Melaka Cleaning Boat Design Improvement through House of Quality (HOQ).- Simulation of Fatigue Life for 316L Stainless Steel under Room Temperature using FEA.- Case of Study: Safety Factor That Affects Participation of Women as Seafarer in Malaysia Maritime Sector.- The Effect of Steam Addition to TheOxidized Nitrogen Concentration from Marine Diesel Engine Combustion.- Viability of a Multi-Stage Exhaust Gas Cleansing Module for Ship Installation.- Measurement of Tensile Strength  of Metallic Materials by Electrical Resistance Per Length Technique.

Azman Ismail is a senior lecturer at Malaysian Institute of Marine Engineering Technology, Universiti Kuala Lumpur, Malaysia. He received his PhD in Mechanical Engineering from Universiti Teknologi PETRONAS, and Master of Engineering in Mechanical-Marine Technology from Universiti Teknologi Malaysia. Prior to that, he was awarded a Bachelor of Engineering (Hons) in Electrical, Electronics and System from Universiti Kebangsaan Malaysia and Graduate Diploma in Industrial Education and Training from the Royal Melbourne Institute of Technology, Australia. He grooms his technical skill at Victoria University of Technology, Australia for Advanced Diploma in Construction and Repair Technology (Marine Vessels). He is also active in research and development for welding and joining technologies especially for friction stir welding on tubular sections and flat panels. This also includes green technologies for sustainable marine and coastal development. He is currently leading a research cluster of Advanced Maritime Industries Sustainability at his university. He has published his research findings in indexed journals and book chapters and actively competes at international and national level innovation competitions. In addition to his achievements, he has been a reviewer and editor for some international journals including Springer. Besides that, he is also active in conservation works as committee member for the National Eco-Campus Program with the World Wide Fund for Nature of Malaysia (WWF-Malaysia).Wardiah Mohd Dahalan had received her PhD in Power System from the University of Malaya, Kuala Lumpur, Malaysia in 2013 and bachelor’s degree (Hons) in Electrical & Electronics Engineering from University of Dundee, Scotland, UK in 1996. She is currently appointed as a Senior Lecturer at the Department of Marine Electrical and Electronics Engineering of University Kuala Lumpur (UniKL-MIMET). As the head of Research & Innovation department since 2015, she actively administers all research activities in UniKL-MIMET. Supervising of internal and external research grants and organization of all activities related to innovation such as exhibitions, competition and conferences are her core activities at UniKL-MIMET. She actively participates in research as a principle or co–principle in many research grants. At the same time, she also shares her expertise by becoming either the author or co-author of the publications of local as well as international journals, books and proceedings especially in the area of power system and energy. Her deep research interest includes network reconfiguration, Optimization Techniques and renewable energy. She is also a member of IEEE, Rina-IMARest, Malaysian Society for Engineering & Technology (MySET) and Malaysia Board of Technologist (MBOT).Andreas Öchsner is a Full Professor for lightweight design and structural simulation at the Esslingen University of Applied Sciences, Germany. Having obtained aDipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart (1997), Germany, he served as a research and teaching assistant at the University of Erlangen-Nuremberg from 1997 to 2003 while working to complete his Doctor of Engineering Sciences (Dr.-Ing.) degree. From 2003 to 2006, he was an Assistant Professor at the Department of Mechanical Engineering and Head of the Cellular Metals Group affiliated with the University of Aveiro, Portugal. He spent seven years (2007–2013) as a Full Professor at the Department of Applied Mechanics, Technical University of Malaysia, where he was also Head of the Advanced Materials and Structure Lab. From 2014-2017 he was a Full Professor at the School of Engineering, Griffith University, Australia and Leader of the Mechanical Engineering Program (Head of Discipline and Program Director).

• Green Composites Reinforced with Natural Fiber: A Review on Mechanical Properties.- Assessment on Maritime Research and Education for Graduate Employability and Sustainability: A Case Study in Faculty of Maritime Studies, Universiti Malaysia Terengganu".- Performance Evaluation of Malaysia’s Maritime Business Companies During Covid 19 with Topsis.- Issues in Legal Guidelines for Armed Guard on Board Vessels.- SWOT and TOWS Matrix Analysis: A Study on Ro-Ro Port Klang Malaysia.- Green Port Performance Indicators for Dry Bulk Terminals: A Review.- Development of Project Management Timeline and Material Buyout Application to Ship Construction Planning: A Review.- A Study of “Perahu Kolek” in Kelantan: Design, Material and Boat Building.- Green Shipbuilding Technology for Boustead Naval Shipyard Sdn Bhd Towards Sustainable Shipbuilding Development.- Ship Wave Resistance by Final Root Method of Solution with Corrections of Block Coefficients and Angleof Entrance.- Comparative Study of Ship Wave Resistance by Various Methods of Solution.- Effect of Cold Forging on Wire Arc Additive Manufactured Profile for Repair Purposes.- Investigation of Mesh Size Effect on FRP Confined Concrete Column Simulation Using Finite Element Analysis.- An Efficient Direct Diagonal Hybrid Block Method for Stiff Second-order Differential Equations.- The Investigation on the Effect of the Bulbous Bow Shape to the Resistance Components and Wave Profiles of Small Ships.- The Strength Analysis of Submersible Drone Hull Structure.- The Conceptual Design of Submersible Drone for Seabed Profiling.- Development of Smart Traffic Light Control System Using PLC and IoT for Emergency Vehicle Passed Through.- The Strength Analysis of Leisure Craft with Transparent Hull.- The Conceptual Design of Leisure Craft with Transparent Hull.- Water Quality Assessment on Difference Depth at Sungai Manjung, Perak.- Monitoring Air Quality Using an IoT-Enabled Air Pollution System On Smartphone.- Introduction of Futuristic Warehouse Synergy: A Warehouse Storage Space Reservation Hub System.- The Analysis of Barge Bridge Collision Response.- - Navigating The Blockchain Trilemma: A Supply Chain Dilemma.- Innovative approach for biomimicry of marine animals for development of engineering device.- Water Retention Properties of Fused Deposition Modeling (FDM) based 3D Printed Polylactic Acid (PLA) Vessel.- The Effect of Compaction Pressure and Sintering Temperature on the Properties of Sayong Ball Clay Membrane.- Determination of Design Specification for Sungai Melaka Cleaning Boat Design Improvement through House of Quality (HOQ).- Simulation of Fatigue Life for 316L Stainless Steel under Room Temperature using FEA.- Case of Study: Safety Factor That Affects Participation of Women as Seafarer in Malaysia Maritime Sector.- The Effect of Steam Addition to TheOxidized Nitrogen Concentration from Marine Diesel Engine Combustion.- Viability of a Multi-Stage Exhaust Gas Cleansing Module for Ship Installation.- Measurement of Tensile Strength  of Metallic Materials by Electrical Resistance Per Length Technique.

Azman Ismail is a senior lecturer at Malaysian Institute of Marine Engineering Technology, Universiti Kuala Lumpur, Malaysia. He received his PhD in Mechanical Engineering from Universiti Teknologi PETRONAS, and Master of Engineering in Mechanical-Marine Technology from Universiti Teknologi Malaysia. Prior to that, he was awarded a Bachelor of Engineering (Hons) in Electrical, Electronics and System from Universiti Kebangsaan Malaysia and Graduate Diploma in Industrial Education and Training from the Royal Melbourne Institute of Technology, Australia. He grooms his technical skill at Victoria University of Technology, Australia for Advanced Diploma in Construction and Repair Technology (Marine Vessels). He is also active in research and development for welding and joining technologies especially for friction stir welding on tubular sections and flat panels. This also includes green technologies for sustainable marine and coastal development. He is currently leading a research cluster of Advanced Maritime Industries Sustainability at his university. He has published his research findings in indexed journals and book chapters and actively competes at international and national level innovation competitions. In addition to his achievements, he has been a reviewer and editor for some international journals including Springer. Besides that, he is also active in conservation works as committee member for the National Eco-Campus Program with the World Wide Fund for Nature of Malaysia (WWF-Malaysia).Wardiah Mohd Dahalan had received her PhD in Power System from the University of Malaya, Kuala Lumpur, Malaysia in 2013 and bachelor’s degree (Hons) in Electrical & Electronics Engineering from University of Dundee, Scotland, UK in 1996. She is currently appointed as a Senior Lecturer at the Department of Marine Electrical and Electronics Engineering of University Kuala Lumpur (UniKL-MIMET). As the head of Research & Innovation department since 2015, she actively administers all research activities in UniKL-MIMET. Supervising of internal and external research grants and organization of all activities related to innovation such as exhibitions, competition and conferences are her core activities at UniKL-MIMET. She actively participates in research as a principle or co–principle in many research grants. At the same time, she also shares her expertise by becoming either the author or co-author of the publications of local as well as international journals, books and proceedings especially in the area of power system and energy. Her deep research interest includes network reconfiguration, Optimization Techniques and renewable energy. She is also a member of IEEE, Rina-IMARest, Malaysian Society for Engineering & Technology (MySET) and Malaysia Board of Technologist (MBOT).Andreas Öchsner is a Full Professor for lightweight design and structural simulation at the Esslingen University of Applied Sciences, Germany. Having obtained aDipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart (1997), Germany, he served as a research and teaching assistant at the University of Erlangen-Nuremberg from 1997 to 2003 while working to complete his Doctor of Engineering Sciences (Dr.-Ing.) degree. From 2003 to 2006, he was an Assistant Professor at the Department of Mechanical Engineering and Head of the Cellular Metals Group affiliated with the University of Aveiro, Portugal. He spent seven years (2007–2013) as a Full Professor at the Department of Applied Mechanics, Technical University of Malaysia, where he was also Head of the Advanced Materials and Structure Lab. From 2014-2017 he was a Full Professor at the School of Engineering, Griffith University, Australia and Leader of the Mechanical Engineering Program (Head of Discipline and Program Director).

• Green Composites Reinforced with Natural Fiber: A Review on Mechanical Properties.- Assessment on Maritime Research and Education for Graduate Employability and Sustainability: A Case Study in Faculty of Maritime Studies, Universiti Malaysia Terengganu".- Performance Evaluation of Malaysia’s Maritime Business Companies During Covid 19 with Topsis.- Issues in Legal Guidelines for Armed Guard on Board Vessels.- SWOT and TOWS Matrix Analysis: A Study on Ro-Ro Port Klang Malaysia.- Green Port Performance Indicators for Dry Bulk Terminals: A Review.- Development of Project Management Timeline and Material Buyout Application to Ship Construction Planning: A Review.- A Study of “Perahu Kolek” in Kelantan: Design, Material and Boat Building.- Green Shipbuilding Technology for Boustead Naval Shipyard Sdn Bhd Towards Sustainable Shipbuilding Development.- Ship Wave Resistance by Final Root Method of Solution with Corrections of Block Coefficients and Angleof Entrance.- Comparative Study of Ship Wave Resistance by Various Methods of Solution.- Effect of Cold Forging on Wire Arc Additive Manufactured Profile for Repair Purposes.- Investigation of Mesh Size Effect on FRP Confined Concrete Column Simulation Using Finite Element Analysis.- An Efficient Direct Diagonal Hybrid Block Method for Stiff Second-order Differential Equations.- The Investigation on the Effect of the Bulbous Bow Shape to the Resistance Components and Wave Profiles of Small Ships.- The Strength Analysis of Submersible Drone Hull Structure.- The Conceptual Design of Submersible Drone for Seabed Profiling.- Development of Smart Traffic Light Control System Using PLC and IoT for Emergency Vehicle Passed Through.- The Strength Analysis of Leisure Craft with Transparent Hull.- The Conceptual Design of Leisure Craft with Transparent Hull.- Water Quality Assessment on Difference Depth at Sungai Manjung, Perak.- Monitoring Air Quality Using an IoT-Enabled Air Pollution System On Smartphone.- Introduction of Futuristic Warehouse Synergy: A Warehouse Storage Space Reservation Hub System.- The Analysis of Barge Bridge Collision Response.- - Navigating The Blockchain Trilemma: A Supply Chain Dilemma.- Innovative approach for biomimicry of marine animals for development of engineering device.- Water Retention Properties of Fused Deposition Modeling (FDM) based 3D Printed Polylactic Acid (PLA) Vessel.- The Effect of Compaction Pressure and Sintering Temperature on the Properties of Sayong Ball Clay Membrane.- Determination of Design Specification for Sungai Melaka Cleaning Boat Design Improvement through House of Quality (HOQ).- Simulation of Fatigue Life for 316L Stainless Steel under Room Temperature using FEA.- Case of Study: Safety Factor That Affects Participation of Women as Seafarer in Malaysia Maritime Sector.- The Effect of Steam Addition to TheOxidized Nitrogen Concentration from Marine Diesel Engine Combustion.- Viability of a Multi-Stage Exhaust Gas Cleansing Module for Ship Installation.- Measurement of Tensile Strength  of Metallic Materials by Electrical Resistance Per Length Technique.