Electric Power Engineering Series – serie

Induction Machines Handbook: Steady State Modeling and Performance offers a thorough treatment of steady-state induction machines (IM), the most used electric motor (generator) in rather constant or variable speed drives, forever lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion.Chapter 1 offers a detailed introduction from fundamental principles to topological classifications and most important applications and power ranges from tens of W to tens of MW.Then individual Chapters 2 and 4 deal in detail with specific issues, such as Magnetic, electric, and insulation materials Electric windings and their mmf Magnetization curve and inductance Leakage inductances and resistances Steady-state equivalent circuit and performance Starting and speed control methods Skin and on-load saturation effects Field harmonics, parasitic torques, radial forces, noise Losses Thermal modeling Single-phase induction machine basics Single-phase induction motors: steady-state modeling and performanceFully revised and updated to reflect the last decade’s progress in the field, this third edition adds new sections, such as Multiphase and multilayer tooth-wound coil windings The brushless doubly fed induction machine (BDFIM) Equivalent circuits for BDFIM Control principles for doubly fed IM Magnetic saturation effects on current and torque versus slip curves Rotor leakage reactance saturation Closed-slot IM saturation The origin of electromagnetic vibration by practical experience PM-assisted split-phase cage-rotor IM’s steady stateThe promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion and i-home appliances makes this third edition a state-of-the-art tool, conceived with numerous case studies and timely for both academia and industry.

Induction Machines Handbook: Transients, Control Principles, Design and Testing presents a practical up-to-date treatment of intricate issues with induction machines (IM) required for design and testing in both rather constant- and variable-speed (with power electronics) drives. It contains ready-to-use industrial design and testing knowledge, with numerous case studies to facilitate a thorough assimilation of new knowledge.Individual Chapters 1 through 14 discuss in detail the following: Three- and multiphase IM transients Single-phase source IM transients Super-high-frequency models and behavior of IM Motor specifications and design principles IM design below 100 kW and constant V1 and f1 IM design above 100 kW and constant V1 and f1 IM design principles for variable speed Optimization design Single-phase IM design Three-phase IM generators Single-phase IM generators Linear induction motors Testing of three-phase IMs Single-phase IM testingFully revised and amply updated to add the new knowledge of the last decade, this third edition includes special sections on Multiphase IM models for transients Doubly fed IMs models for transients Cage-rotor synchronized reluctance motors Cage-rotor PM synchronous motor Transient operation of self-excited induction generator Brushless doubly fed induction motor/generators Doubly fed induction generators with D.C. output Linear induction motor control with end effect Recent trends in IM testing with power electronics Cage-PM rotor line-start IM testing Linear induction motor (LIM) testingThis up-to-date book discusses in detail the transients, control principles, and design and testing of various IMs for line-start and variable-speed applications in various topologies, with numerous case studies. It will be of direct assistance to academia and industry in conceiving, designing, fabricating, and testing IMs (for the future) of various industries, from home appliances, through robotics, e-transport, and renewable energy conversion.

The third edition of Induction Machines Handbook comprises two volumes, Induction Machines Handbook: Steady State Modeling and Performance and Induction Machines Handbook: Transients, Control Principles, Design and Testing. The promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion, i-home appliances makes this third edition state of the art tool, conceived with numerous case studies, timely for both Academia and Industry.The first volume offers a thorough treatment of steady state modeling and performance of induction machines, the most used electric motors (generators) in rather constant or variable speed drives for even lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion.The second volume presents a practical up to date treatment of intricate issues with induction machine (IM) required for design and testing both in rather constant and variable speed (with power electronics) drives. It contains ready to use in industrial design and testing knowledge with numerous case studies to facilitate thorough assimilation of new knowledge.

Electric Energy Systems, Second Edition provides an analysis of electric generation and transmission systems that addresses diverse regulatory issues. It includes fundamental background topics, such as load flow, short circuit analysis, and economic dispatch, as well as advanced topics, such as harmonic load flow, state estimation, voltage and frequency control, electromagnetic transients, etc. The new edition features updated material throughout the text and new sections throughout the chapters. It covers current issues in the industry, including renewable generation with associated control and scheduling problems, HVDC transmission, and use of synchrophasors (PMUs). The text explores more sophisticated protections and the new roles of demand, side management, etc. Written by internationally recognized specialists, the text contains a wide range of worked out examples along with numerous exercises and solutions to enhance understanding of the material.FeaturesIntegrates technical and economic analyses of electric energy systems.Covers HVDC transmission.Addresses renewable generation and the associated control and scheduling problems.Analyzes electricity markets, electromagnetic transients, and harmonic load flow.Features new sections and updated material throughout the text.Includes examples and solved problems.

The electric power industry in the U.S. has undergone dramatic changes in recent years. Tight regulations enacted in the 1970's and then de-regulation in the 90's have transformed it from a technology-driven industry into one driven by public policy requirements and the open-access market. Now, just as the utility companies must change to ensure their survival, engineers and other professionals in the industry must acquire new skills, adopt new attitudes, and accommodate other disciplines.Power System Operations and Electricity Markets provides the information engineers need to understand and meet the challenges of the new competitive environment. Integrating the business and technical aspects of the restructured power industry, it explains, clearly and succinctly, how new methods for power systems operations and energy marketing relate to public policy, regulation, economics, and engineering science. The authors examine the technologies and techniques currently in use and lay the groundwork for the coming era of unbundling, open access, power marketing, self-generation, and regional transmission operations.The rapid, massive changes in the electric power industry and in the economy have rendered most books on the subject obsolete. Based on the authors' years of front-line experience in the industry and in regulatory organizations, Power System Operations and Electricity Markets is current, insightful, and complete with Web links that will help readers stay up to date.

Recent trends in engineering show increased emphasis on integrated analysis, design, and control of advanced electromechanical systems, and their scope continues to expand. Mechatronics-a breakthrough concept-has evolved to attack, integrate, and solve a variety of emerging problems in engineering, and there appears to be no end to its application. It has become essential for all engineers to understand its basic theoretical standpoints and practical applications.Electromechanical Systems, Electric Machines, and Applied Mechatronics presents a unique combination of traditional engineering topics and the latest technologies, integrated to stimulate new advances in the analysis and design of state-of-the-art electromechanical systems. With a focus on numerical and analytical methods, the author develops the rigorous theory of electromechanical systems and helps build problem-solving skills. He also stresses simulation as a critical aspect of developing and prototyping advanced systems. He uses the MATLAB™ environment for his examples and includes a MATLAB™ diskette with the book, thus providing a solid introduction to this standard engineering tool.Readable, interesting, and accessible, Electromechanical Systems, Electric Machines, and Applied Mechatronics develops a thorough understanding of the integrated perspectives in the design and analysis of electromechanical systems. It covers the basic concepts in mechatronics, and with numerous worked examples, prepares the reader to use the results in engineering practice. Readers who master this book will know what they are doing, why they are doing it, and how to do it.

The two major broad applications of electrical energy are information processing and energy processing. Hence, it is no wonder that electric machines have occupied a large and revered space in the field of electrical engineering. Such an important topic requires a careful approach, and Charles A. Gross' Electric Machines offers the most balanced, application-oriented, and modern perspective on electromagnetic machines available.Written in a style that is both accessible and authoritative, this book explores all aspects of electromagnetic-mechanical (EM) machines. Rather than viewing the EM machine in isolation, the author treats the machine as part of an integrated system of source, controller, motor, and load. The discussion progresses systematically through basic machine physics and principles of operation to real-world applications and relevant control issues for each type of machine presented. Coverage ranges from DC, induction, and synchronous machines to specialized machines such as transformers, translational machines, and microelectromechanical systems (MEMS). Stimulating example applications include electric vehicles, wind energy, and vertical transportation. Numerous example problems illustrate and reinforce the concepts discussed.Along with appendices filled with unit conversions and background material, Electric Machines is a succinct, in-depth, and complete guide to understanding electric machines for novel applications.

Computational Methods for Electric Power Systems introduces computational methods that form the basis of many analytical studies in power systems. The book provides the background for a number of widely used algorithms that underlie several commercial software packages, linking concepts to power system applications. By understanding the theory behind many of the algorithms, the reader can make better use of the software and make more informed decisions (e.g., choice of integration method and step size in simulation packages).This Third Edition contains new material on preconditioners for linear iterative methods, Broyden’s method, and Jacobian-free Newton–Krylov methods. It includes additional problems and examples, as well as updated examples on sparse lower-upper (LU) factorization. It also adds coverage of the eigensystem realization algorithm and the double-shift method for computing complex eigenvalues.

The third edition of Induction Machines Handbook comprises two volumes, Induction Machines Handbook: Steady State Modeling and Performance and Induction Machines Handbook: Transients, Control Principles, Design and Testing. The promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion, i-home appliances makes this third edition state of the art tool, conceived with numerous case studies, timely for both Academia and Industry.The first volume offers a thorough treatment of steady state modeling and performance of induction machines, the most used electric motors (generators) in rather constant or variable speed drives for even lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion.The second volume presents a practical up to date treatment of intricate issues with induction machine (IM) required for design and testing both in rather constant and variable speed (with power electronics) drives. It contains ready to use in industrial design and testing knowledge with numerous case studies to facilitate thorough assimilation of new knowledge.

Induction Machines Handbook: Steady State Modeling and Performance offers a thorough treatment of steady-state induction machines (IM), the most used electric motor (generator) in rather constant or variable speed drives, forever lower energy consumption and higher productivity in basically all industries, from home appliances, through robotics to e-transport and wind energy conversion.Chapter 1 offers a detailed introduction from fundamental principles to topological classifications and most important applications and power ranges from tens of W to tens of MW.Then individual Chapters 2 and 4 deal in detail with specific issues, such as Magnetic, electric, and insulation materials Electric windings and their mmf Magnetization curve and inductance Leakage inductances and resistances Steady-state equivalent circuit and performance Starting and speed control methods Skin and on-load saturation effects Field harmonics, parasitic torques, radial forces, noise Losses Thermal modeling Single-phase induction machine basics Single-phase induction motors: steady-state modeling and performanceFully revised and updated to reflect the last decade’s progress in the field, this third edition adds new sections, such as Multiphase and multilayer tooth-wound coil windings The brushless doubly fed induction machine (BDFIM) Equivalent circuits for BDFIM Control principles for doubly fed IM Magnetic saturation effects on current and torque versus slip curves Rotor leakage reactance saturation Closed-slot IM saturation The origin of electromagnetic vibration by practical experience PM-assisted split-phase cage-rotor IM’s steady stateThe promise of renewable (hydro and wind) energy via cage-rotor and doubly fed variable speed generators e-transport propulsion and i-home appliances makes this third edition a state-of-the-art tool, conceived with numerous case studies and timely for both academia and industry.

Induction Machines Handbook: Transients, Control Principles, Design and Testing presents a practical up-to-date treatment of intricate issues with induction machines (IM) required for design and testing in both rather constant- and variable-speed (with power electronics) drives. It contains ready-to-use industrial design and testing knowledge, with numerous case studies to facilitate a thorough assimilation of new knowledge.Individual Chapters 1 through 14 discuss in detail the following: Three- and multiphase IM transients Single-phase source IM transients Super-high-frequency models and behavior of IM Motor specifications and design principles IM design below 100 kW and constant V1 and f1 IM design above 100 kW and constant V1 and f1 IM design principles for variable speed Optimization design Single-phase IM design Three-phase IM generators Single-phase IM generators Linear induction motors Testing of three-phase IMs Single-phase IM testingFully revised and amply updated to add the new knowledge of the last decade, this third edition includes special sections on Multiphase IM models for transients Doubly fed IMs models for transients Cage-rotor synchronized reluctance motors Cage-rotor PM synchronous motor Transient operation of self-excited induction generator Brushless doubly fed induction motor/generators Doubly fed induction generators with D.C. output Linear induction motor control with end effect Recent trends in IM testing with power electronics Cage-PM rotor line-start IM testing Linear induction motor (LIM) testingThis up-to-date book discusses in detail the transients, control principles, and design and testing of various IMs for line-start and variable-speed applications in various topologies, with numerous case studies. It will be of direct assistance to academia and industry in conceiving, designing, fabricating, and testing IMs (for the future) of various industries, from home appliances, through robotics, e-transport, and renewable energy conversion.

The two major broad applications of electrical energy are information processing and energy processing. Hence, it is no wonder that electric machines have occupied a large and revered space in the field of electrical engineering. Such an important topic requires a careful approach, and Charles A. Gross' Electric Machines offers the most balanced, a

Considered to be the first book devoted to the subject, Linear Synchronous Motors: Transportation and Automation Systems, Second Edition evaluates the state of the art, demonstrating the technological innovations that are improving the design, construction, and performance of modern control systems. This new edition not only illustrates the development of linear synchronous motor drives, but it also discusses useful techniques for selecting a motor that will meet the specific requirements of linear electrical drives. New Features for the Second Edition: Several updated and expanded sections, as well as two new chapters on FEM Even more numerical examples, calculations, and mathematical models Broadened target audience that includes researchers, scientists, students, and moreEvaluating trends and practical techniques for achieving optimal system performance, the authors showcase ready-to-implement solutions for common roadblocks in this process. The book presents fundamental equations and calculations used to determine and evaluate system operation, efficiency, and reliability, with an exploration of modern computer-aided design of linear synchronous motors, including the finite element approach. It covers topics such as linear sensors and stepping motors, magnetic levitation systems, elevators, and factory automation systems. It also features case studies on flat PM, tubular PM, air-cored, and hybrid linear synchronous motors, as well as 3D finite element method analysis of tubular linear reluctance motors, and linear oscillatory actuators. With such an exceptional presentation of practical tools and conceptual illustrations, this volume is an especially powerful resource. It will benefit readers from all walks by providing numerical examples, models, guidelines, and diagrams to help develop a clear understanding of linear synchronous motor operations, characteristics, and much more.

Electric Energy Systems, Second Edition provides an analysis of electric generation and transmission systems that addresses diverse regulatory issues. It includes fundamental background topics, such as load flow, short circuit analysis, and economic dispatch, as well as advanced topics, such as harmonic load flow, state estimation, voltage and frequency control, electromagnetic transients, etc. The new edition features updated material throughout the text and new sections throughout the chapters. It covers current issues in the industry, including renewable generation with associated control and scheduling problems, HVDC transmission, and use of synchrophasors (PMUs). The text explores more sophisticated protections and the new roles of demand, side management, etc. Written by internationally recognized specialists, the text contains a wide range of worked out examples along with numerous exercises and solutions to enhance understanding of the material.FeaturesIntegrates technical and economic analyses of electric energy systems.Covers HVDC transmission.Addresses renewable generation and the associated control and scheduling problems.Analyzes electricity markets, electromagnetic transients, and harmonic load flow.Features new sections and updated material throughout the text.Includes examples and solved problems.

The two major broad applications of electrical energy are information processing and energy processing. Hence, it is no wonder that electric machines have occupied a large and revered space in the field of electrical engineering. Such an important topic requires a careful approach, and Charles A. Gross' Electric Machines offers the most balanced, a

Considered to be the first book devoted to the subject, Linear Synchronous Motors: Transportation and Automation Systems, Second Edition evaluates the state of the art, demonstrating the technological innovations that are improving the design, construction, and performance of modern control systems. This new edition not only illustrates the development of linear synchronous motor drives, but it also discusses useful techniques for selecting a motor that will meet the specific requirements of linear electrical drives. New Features for the Second Edition: Several updated and expanded sections, as well as two new chapters on FEM Even more numerical examples, calculations, and mathematical models Broadened target audience that includes researchers, scientists, students, and moreEvaluating trends and practical techniques for achieving optimal system performance, the authors showcase ready-to-implement solutions for common roadblocks in this process. The book presents fundamental equations and calculations used to determine and evaluate system operation, efficiency, and reliability, with an exploration of modern computer-aided design of linear synchronous motors, including the finite element approach. It covers topics such as linear sensors and stepping motors, magnetic levitation systems, elevators, and factory automation systems. It also features case studies on flat PM, tubular PM, air-cored, and hybrid linear synchronous motors, as well as 3D finite element method analysis of tubular linear reluctance motors, and linear oscillatory actuators. With such an exceptional presentation of practical tools and conceptual illustrations, this volume is an especially powerful resource. It will benefit readers from all walks by providing numerical examples, models, guidelines, and diagrams to help develop a clear understanding of linear synchronous motor operations, characteristics, and much more.

Featuring contributions from worldwide leaders in the field, the carefully crafted Electric Power Generation, Transmission, and Distribution, Third Edition (part of the five-volume set, The Electric Power Engineering Handbook) provides convenient access to detailed information on a diverse array of power engineering topics. Updates to nearly every chapter keep this book at the forefront of developments in modern power systems, reflecting international standards, practices, and technologies.Topics covered include:Electric power generation: nonconventional methodsElectric power generation: conventional methodsTransmission systemDistribution systemsElectric power utilizationPower qualityL.L. Grigsby, a respected and accomplished authority in power engineering, and section editors Saifur Rahman, Rama Ramakumar, George Karady, Bill Kersting, Andrew Hanson, and Mark Halpin present substantially new and revised material, giving readers up-to-date information on core areas. These include advanced energy technologies, distributed utilities, load characterization and modeling, and power quality issues such as power system harmonics, voltage sags, and power quality monitoring.With six new and 16 fully revised chapters, the book supplies a high level of detail and, more importantly, a tutorial style of writing and use of photographs and graphics to help the reader understand the material.New chapters cover:WaterTransmission Line Reliability MethodsHigh Voltage Direct Current Transmission SystemAdvanced Technology High-Temperature ConductionDistribution Short-Circuit ProtectionLinear Electric MotorsA volume in the Electric Power Engineering Handbook, Third Edition.Other volumes in the set:K12648 Power Systems, Third Edition (ISBN: 9781439856338)K13917 Power System Stability and Control, Third Edition (ISBN: 9781439883204)K12650 Electric Power Substations Engineering, Third Edition (ISBN: 9781439856383)K12643 Electric Power Transformer Engineering, Third Edition (ISBN: 9781439856291)