Dr. Samui is an Associate Professor in the Department of Civil Engineering at NIT Patna, India. He received his PhD in Geotechnical Engineering from the Indian Institute of Science Bangalore, India, in 2008. His research interests include geohazard, earthquake engineering, concrete technology, pile foundation and slope stability, and application of AI for solving different problems in civil engineering. Dr. Samui is a repeat Elsevier editor but also a prolific contributor to journal papers, book chapters, and peer-reviewed conference proceedings. Dookie Kim is a Professor in the Department of Civil and Environmental Engineering, Kongju National University ,1223-24 Cheonan-daero, 31080, Republic of Korea. Professor Kim has a broad experience in structural dynamics. He published journal articles, conference papers, book chapters and 2 books. Dr. Nagesh R. Iyer is a Fellow of the Indian National Academy of Engineering and is currently Dean of (Infrastructure, Planning and Support) and Visiting Professor, at the Indian Institute of Technology Dharwad. He was formerly Director of CSIR-Structural Engineering Research Centre and Coordinating Director of CSIR Madras Complex. Concurrently he held the posts of Acting Director and Distinguished Emeritus Professor at the Academy of Scientific and Innovative Research (AcSIR). He has over 44 years of experience in the computer-aided analysis and design of complex and large structures which include infrastructural facilities. Prof. Sandeep Chaudhary is currently working as Professor in the Discipline of Civil Engineering, Indian Institute of Technology Indore, India. Before joining IIT Indore, he served as a faculty member in different capacities at MNIT Jaipur, India, for more than twenty years. His research group carries out both analytical and experimental studies, which range from microstructure studies to full-scale. He has Chaired “Technical Committee 1: Design” of the Asian Concrete Federation for three years and is presently heading “Standing Committee 1 (SC1): Design” of the Asian Concrete Federation.

Select Guide Rating

• 1. An overview of cementitious construction materials2. Computational intelligence for modeling of pavement surface characteristics3. Computational intelligence for modeling of asphalt pavement surface distress4. Expanded polystyrene geofoam5. Recycling of industrial wastes for value-added applications in clay-based ceramic products: a global review (2015-19)6. Emerging advancement of fiber-reinforced polymer composites in structural applications7. Fiber-reinforced concrete and ultrahigh-performance fiber-reinforced concrete materials8. The superplasticizer effect on the rheological and mechanical properties of self-compacting concrete9. Trends and perspectives in the use of timber and derived products in building facades10. Dynamic response of laminated composite plates fitted with piezoelectric actuators11. Functional nanomaterials and their applications toward smart and green buildings12. Production of sustainable concrete composites comprising waste metalized plastic fibers and palm oil fuel ash13. Alkali-activated concrete systems: a state of art14. Porous concrete pavement containing nanosilica from black rice husk ash15. Porous alkali-activated materials16. Lightweight cement-based materials17. Development of alkali-activated binders from sodium silicate powder produced from industrial wastes18. Innovative cement-based materials for environmental protection and restoration19. Comparative effects of using recycled CFRP and GFRP fibers on fresh- and hardened-state properties of self-compacting concretes: a review20. Corrosion inhibitors for increasing the service life of structures21. Use of fly ash for the development of sustainable construction materials22. An innovative and smart road construction material: thermochromic asphalt binders23. Resin and steel-reinforced resin used as injection materials in bolted connections24. Swelling behavior of expansive soils stabilized with expanded polystyrene geofoam inclusion25. New generation of cement-based composites for civil engineering26. Potential use of recycled aggregate as a self-healing concrete carrier27. Self-healing concrete28. Equations for prediction of rubberized concrete compressive strength: a literature review29. Influence of cobinders on durability and mechanical properties of alkali-activated magnesium aluminosilicate binders from soapstone30. Fly ash utilization in concrete tiles and paver blocks31. Problems in short-fiber composites and analysis of chopped fiber-reinforced materials

Dr. Samui is an Associate Professor in the Department of Civil Engineering at NIT Patna, India. He received his PhD in Geotechnical Engineering from the Indian Institute of Science Bangalore, India, in 2008. His research interests include geohazard, earthquake engineering, concrete technology, pile foundation and slope stability, and application of AI for solving different problems in civil engineering. Dr. Samui is a repeat Elsevier editor but also a prolific contributor to journal papers, book chapters, and peer-reviewed conference proceedings. Dookie Kim is a Professor in the Department of Civil and Environmental Engineering, Kongju National University ,1223-24 Cheonan-daero, 31080, Republic of Korea. Professor Kim has a broad experience in structural dynamics. He published journal articles, conference papers, book chapters and 2 books. Dr. Nagesh R. Iyer is a Fellow of the Indian National Academy of Engineering and is currently Dean of (Infrastructure, Planning and Support) and Visiting Professor, at the Indian Institute of Technology Dharwad. He was formerly Director of CSIR-Structural Engineering Research Centre and Coordinating Director of CSIR Madras Complex. Concurrently he held the posts of Acting Director and Distinguished Emeritus Professor at the Academy of Scientific and Innovative Research (AcSIR). He has over 44 years of experience in the computer-aided analysis and design of complex and large structures which include infrastructural facilities. Prof. Sandeep Chaudhary is currently working as Professor in the Discipline of Civil Engineering, Indian Institute of Technology Indore, India. Before joining IIT Indore, he served as a faculty member in different capacities at MNIT Jaipur, India, for more than twenty years. His research group carries out both analytical and experimental studies, which range from microstructure studies to full-scale. He has Chaired “Technical Committee 1: Design” of the Asian Concrete Federation for three years and is presently heading “Standing Committee 1 (SC1): Design” of the Asian Concrete Federation.

Select Guide Rating

• 1. An overview of cementitious construction materials2. Computational intelligence for modeling of pavement surface characteristics3. Computational intelligence for modeling of asphalt pavement surface distress4. Expanded polystyrene geofoam5. Recycling of industrial wastes for value-added applications in clay-based ceramic products: a global review (2015-19)6. Emerging advancement of fiber-reinforced polymer composites in structural applications7. Fiber-reinforced concrete and ultrahigh-performance fiber-reinforced concrete materials8. The superplasticizer effect on the rheological and mechanical properties of self-compacting concrete9. Trends and perspectives in the use of timber and derived products in building facades10. Dynamic response of laminated composite plates fitted with piezoelectric actuators11. Functional nanomaterials and their applications toward smart and green buildings12. Production of sustainable concrete composites comprising waste metalized plastic fibers and palm oil fuel ash13. Alkali-activated concrete systems: a state of art14. Porous concrete pavement containing nanosilica from black rice husk ash15. Porous alkali-activated materials16. Lightweight cement-based materials17. Development of alkali-activated binders from sodium silicate powder produced from industrial wastes18. Innovative cement-based materials for environmental protection and restoration19. Comparative effects of using recycled CFRP and GFRP fibers on fresh- and hardened-state properties of self-compacting concretes: a review20. Corrosion inhibitors for increasing the service life of structures21. Use of fly ash for the development of sustainable construction materials22. An innovative and smart road construction material: thermochromic asphalt binders23. Resin and steel-reinforced resin used as injection materials in bolted connections24. Swelling behavior of expansive soils stabilized with expanded polystyrene geofoam inclusion25. New generation of cement-based composites for civil engineering26. Potential use of recycled aggregate as a self-healing concrete carrier27. Self-healing concrete28. Equations for prediction of rubberized concrete compressive strength: a literature review29. Influence of cobinders on durability and mechanical properties of alkali-activated magnesium aluminosilicate binders from soapstone30. Fly ash utilization in concrete tiles and paver blocks31. Problems in short-fiber composites and analysis of chopped fiber-reinforced materials

Dr. Samui is an Associate Professor in the Department of Civil Engineering at NIT Patna, India. He received his PhD in Geotechnical Engineering from the Indian Institute of Science Bangalore, India, in 2008. His research interests include geohazard, earthquake engineering, concrete technology, pile foundation and slope stability, and application of AI for solving different problems in civil engineering. Dr. Samui is a repeat Elsevier editor but also a prolific contributor to journal papers, book chapters, and peer-reviewed conference proceedings. Dookie Kim is a Professor in the Department of Civil and Environmental Engineering, Kongju National University ,1223-24 Cheonan-daero, 31080, Republic of Korea. Professor Kim has a broad experience in structural dynamics. He published journal articles, conference papers, book chapters and 2 books. Dr. Nagesh R. Iyer is a Fellow of the Indian National Academy of Engineering and is currently Dean of (Infrastructure, Planning and Support) and Visiting Professor, at the Indian Institute of Technology Dharwad. He was formerly Director of CSIR-Structural Engineering Research Centre and Coordinating Director of CSIR Madras Complex. Concurrently he held the posts of Acting Director and Distinguished Emeritus Professor at the Academy of Scientific and Innovative Research (AcSIR). He has over 44 years of experience in the computer-aided analysis and design of complex and large structures which include infrastructural facilities. Prof. Sandeep Chaudhary is currently working as Professor in the Discipline of Civil Engineering, Indian Institute of Technology Indore, India. Before joining IIT Indore, he served as a faculty member in different capacities at MNIT Jaipur, India, for more than twenty years. His research group carries out both analytical and experimental studies, which range from microstructure studies to full-scale. He has Chaired “Technical Committee 1: Design” of the Asian Concrete Federation for three years and is presently heading “Standing Committee 1 (SC1): Design” of the Asian Concrete Federation.

Select Guide Rating

• 1. An overview of cementitious construction materials2. Computational intelligence for modeling of pavement surface characteristics3. Computational intelligence for modeling of asphalt pavement surface distress4. Expanded polystyrene geofoam5. Recycling of industrial wastes for value-added applications in clay-based ceramic products: a global review (2015-19)6. Emerging advancement of fiber-reinforced polymer composites in structural applications7. Fiber-reinforced concrete and ultrahigh-performance fiber-reinforced concrete materials8. The superplasticizer effect on the rheological and mechanical properties of self-compacting concrete9. Trends and perspectives in the use of timber and derived products in building facades10. Dynamic response of laminated composite plates fitted with piezoelectric actuators11. Functional nanomaterials and their applications toward smart and green buildings12. Production of sustainable concrete composites comprising waste metalized plastic fibers and palm oil fuel ash13. Alkali-activated concrete systems: a state of art14. Porous concrete pavement containing nanosilica from black rice husk ash15. Porous alkali-activated materials16. Lightweight cement-based materials17. Development of alkali-activated binders from sodium silicate powder produced from industrial wastes18. Innovative cement-based materials for environmental protection and restoration19. Comparative effects of using recycled CFRP and GFRP fibers on fresh- and hardened-state properties of self-compacting concretes: a review20. Corrosion inhibitors for increasing the service life of structures21. Use of fly ash for the development of sustainable construction materials22. An innovative and smart road construction material: thermochromic asphalt binders23. Resin and steel-reinforced resin used as injection materials in bolted connections24. Swelling behavior of expansive soils stabilized with expanded polystyrene geofoam inclusion25. New generation of cement-based composites for civil engineering26. Potential use of recycled aggregate as a self-healing concrete carrier27. Self-healing concrete28. Equations for prediction of rubberized concrete compressive strength: a literature review29. Influence of cobinders on durability and mechanical properties of alkali-activated magnesium aluminosilicate binders from soapstone30. Fly ash utilization in concrete tiles and paver blocks31. Problems in short-fiber composites and analysis of chopped fiber-reinforced materials