Prashant N. Kumta holds the Edward R. Weidlein Endowed Chair and Distinguished Professor with Tenure at the University of Pittsburgh Swanson School of Engineering and School of Dental Medicine, and is also a Professor in the Departments of BioEngineering, Chemical and Petroleum Engineering, Mechanical Engineering and Materials Science, and Oral and Craniofacial Sciences. His research focuses on lithium-ion batteries, fuel cells, supercapacitors, electrolysis, and metallic biomaterials.Aloysius F. Hepp is Chief Technologist at Nanotech Innovations and an independent consultant based in Cleveland, Ohio. He earned a PhD in Inorganic Photochemistry in 1983 from MIT and retired in December 2016 from the Photovoltaic & Electrochemical Systems Branch of the NASA Glenn Research Center (Cleveland). He was a visiting fellow at Harvard University from 1992–3. He was awarded the NASA Exceptional Achievement medal in 1997. He has served as an adjunct faculty member at the University of Albany and Cleveland State University. Dr. Hepp has co-authored nearly 200 publications (including six patents) focused on processing of thin film and nanomaterials for I–III–VI solar cells, Li-ion batteries, integrated power devices and flight experiments, and precursors and spray pyrolysis deposition of sulfides and carbon nanotubes. He has co-edited twelve books on advanced materials processing, energy conversion and electronics, biomimicry, and aerospace technologies. He is Editor-in-Chief Emeritus of Materials Science in Semiconductor Processing (MSSP) and is currently the chair of the International Advisory Board of MSSP, as well as serving on the Editorial Advisory Boards of Mater. Sci. and Engin. B and Heliyon. He has recently been appointed as Series Editor for the Vacuum and Thin-Film Deposition Technologies series and the Aerospace Fundamentals, Applications, and Exploration series.Moni K. Datta is an Assistant Professor at the Bioengineering Department of the University of Pittsburgh in Pennsylvania, USA. Oleg I. Velikokhatnyi is an Assistant Professor in the Bioengineering Department at the University of Pittsburgh, USA. His research includes first-principles and semi-empirical approaches applied to alternative energy sources (rechargeable Li-ion batteries, hydrogen storage materials, fuel cells, water electrolysis) and biodegradable magnesium-based alloys for orthopedic and craniofacial applications.

• 1. Introduction to the lithium-sulfur system: Technology and electric vehicle applications2. Solid electrolytes for lithium-sulfur batteries3. Applications of metal-organic frameworks for lithium-sulfur batteries4. Multiscale modeling of physicochemical interactions in lithium-sulfur battery electrodes5. Reliable HPLC-MS method for the quantitative and qualitative analysis of dissolved polysulfide ions during the operation of lithium-sulfur batteries6. Modeling of electrode, electrolyte as well as interfaces related to lithium-sulfur batteries7. Recent progress in fundamental understanding of selenium-doped sulfur cathodes during charging and discharging with various electrolytes8. Suppression of lithium dendrite growth in lithium-sulfur batteries9. The role of advanced host materials and binders for improving lithium-sulfur battery performance10. Future of lithium-sulfur batteries: the criticality of solid electrolytes11. New approaches to high energy density cathode and anode architectures for lithium-sulfur batteries12. A solid-state approach to a lithium-sulfur battery13. State estimation methodologies for lithium-sulfur battery management systems14. Batteries for aeronautics and space exploration: recent developments and future prospects

Prashant N. Kumta holds the Edward R. Weidlein Endowed Chair and Distinguished Professor with Tenure at the University of Pittsburgh Swanson School of Engineering and School of Dental Medicine, and is also a Professor in the Departments of BioEngineering, Chemical and Petroleum Engineering, Mechanical Engineering and Materials Science, and Oral and Craniofacial Sciences. His research focuses on lithium-ion batteries, fuel cells, supercapacitors, electrolysis, and metallic biomaterials.Aloysius F. Hepp is Chief Technologist at Nanotech Innovations and an independent consultant based in Cleveland, Ohio. He earned a PhD in Inorganic Photochemistry in 1983 from MIT and retired in December 2016 from the Photovoltaic & Electrochemical Systems Branch of the NASA Glenn Research Center (Cleveland). He was a visiting fellow at Harvard University from 1992–3. He was awarded the NASA Exceptional Achievement medal in 1997. He has served as an adjunct faculty member at the University of Albany and Cleveland State University. Dr. Hepp has co-authored nearly 200 publications (including six patents) focused on processing of thin film and nanomaterials for I–III–VI solar cells, Li-ion batteries, integrated power devices and flight experiments, and precursors and spray pyrolysis deposition of sulfides and carbon nanotubes. He has co-edited twelve books on advanced materials processing, energy conversion and electronics, biomimicry, and aerospace technologies. He is Editor-in-Chief Emeritus of Materials Science in Semiconductor Processing (MSSP) and is currently the chair of the International Advisory Board of MSSP, as well as serving on the Editorial Advisory Boards of Mater. Sci. and Engin. B and Heliyon. He has recently been appointed as Series Editor for the Vacuum and Thin-Film Deposition Technologies series and the Aerospace Fundamentals, Applications, and Exploration series.Moni K. Datta is an Assistant Professor at the Bioengineering Department of the University of Pittsburgh in Pennsylvania, USA. Oleg I. Velikokhatnyi is an Assistant Professor in the Bioengineering Department at the University of Pittsburgh, USA. His research includes first-principles and semi-empirical approaches applied to alternative energy sources (rechargeable Li-ion batteries, hydrogen storage materials, fuel cells, water electrolysis) and biodegradable magnesium-based alloys for orthopedic and craniofacial applications.

• 1. Introduction to the lithium-sulfur system: Technology and electric vehicle applications2. Solid electrolytes for lithium-sulfur batteries3. Applications of metal-organic frameworks for lithium-sulfur batteries4. Multiscale modeling of physicochemical interactions in lithium-sulfur battery electrodes5. Reliable HPLC-MS method for the quantitative and qualitative analysis of dissolved polysulfide ions during the operation of lithium-sulfur batteries6. Modeling of electrode, electrolyte as well as interfaces related to lithium-sulfur batteries7. Recent progress in fundamental understanding of selenium-doped sulfur cathodes during charging and discharging with various electrolytes8. Suppression of lithium dendrite growth in lithium-sulfur batteries9. The role of advanced host materials and binders for improving lithium-sulfur battery performance10. Future of lithium-sulfur batteries: the criticality of solid electrolytes11. New approaches to high energy density cathode and anode architectures for lithium-sulfur batteries12. A solid-state approach to a lithium-sulfur battery13. State estimation methodologies for lithium-sulfur battery management systems14. Batteries for aeronautics and space exploration: recent developments and future prospects

Prashant N. Kumta holds the Edward R. Weidlein Endowed Chair and Distinguished Professor with Tenure at the University of Pittsburgh Swanson School of Engineering and School of Dental Medicine, and is also a Professor in the Departments of BioEngineering, Chemical and Petroleum Engineering, Mechanical Engineering and Materials Science, and Oral and Craniofacial Sciences. His research focuses on lithium-ion batteries, fuel cells, supercapacitors, electrolysis, and metallic biomaterials.Aloysius F. Hepp is Chief Technologist at Nanotech Innovations and an independent consultant based in Cleveland, Ohio. He earned a PhD in Inorganic Photochemistry in 1983 from MIT and retired in December 2016 from the Photovoltaic & Electrochemical Systems Branch of the NASA Glenn Research Center (Cleveland). He was a visiting fellow at Harvard University from 1992–3. He was awarded the NASA Exceptional Achievement medal in 1997. He has served as an adjunct faculty member at the University of Albany and Cleveland State University. Dr. Hepp has co-authored nearly 200 publications (including six patents) focused on processing of thin film and nanomaterials for I–III–VI solar cells, Li-ion batteries, integrated power devices and flight experiments, and precursors and spray pyrolysis deposition of sulfides and carbon nanotubes. He has co-edited twelve books on advanced materials processing, energy conversion and electronics, biomimicry, and aerospace technologies. He is Editor-in-Chief Emeritus of Materials Science in Semiconductor Processing (MSSP) and is currently the chair of the International Advisory Board of MSSP, as well as serving on the Editorial Advisory Boards of Mater. Sci. and Engin. B and Heliyon. He has recently been appointed as Series Editor for the Vacuum and Thin-Film Deposition Technologies series and the Aerospace Fundamentals, Applications, and Exploration series.Moni K. Datta is an Assistant Professor at the Bioengineering Department of the University of Pittsburgh in Pennsylvania, USA. Oleg I. Velikokhatnyi is an Assistant Professor in the Bioengineering Department at the University of Pittsburgh, USA. His research includes first-principles and semi-empirical approaches applied to alternative energy sources (rechargeable Li-ion batteries, hydrogen storage materials, fuel cells, water electrolysis) and biodegradable magnesium-based alloys for orthopedic and craniofacial applications.

• 1. Introduction to the lithium-sulfur system: Technology and electric vehicle applications2. Solid electrolytes for lithium-sulfur batteries3. Applications of metal-organic frameworks for lithium-sulfur batteries4. Multiscale modeling of physicochemical interactions in lithium-sulfur battery electrodes5. Reliable HPLC-MS method for the quantitative and qualitative analysis of dissolved polysulfide ions during the operation of lithium-sulfur batteries6. Modeling of electrode, electrolyte as well as interfaces related to lithium-sulfur batteries7. Recent progress in fundamental understanding of selenium-doped sulfur cathodes during charging and discharging with various electrolytes8. Suppression of lithium dendrite growth in lithium-sulfur batteries9. The role of advanced host materials and binders for improving lithium-sulfur battery performance10. Future of lithium-sulfur batteries: the criticality of solid electrolytes11. New approaches to high energy density cathode and anode architectures for lithium-sulfur batteries12. A solid-state approach to a lithium-sulfur battery13. State estimation methodologies for lithium-sulfur battery management systems14. Batteries for aeronautics and space exploration: recent developments and future prospects