Pankaj Agarwal is working as Professor in mechanical Engineering Department in Samrat Ashok technological Institute Vidisha (M.P.) India. He got PhD in Mechanical Engineering from BU Bhopal India. Currently, he is the HOD mechanical engineering. Advanced machining processes, Micro manufacturing, sustainable manufacturing, 3D printing are the field of interest. He has authored many articles in Journals and International conferences. He is having a vast experience of more than 25 years in research, teaching , and training in the field of mechanical and industrial engineering. Lokesh Bajpai is working as Professor in Mechanical Engineering Department at Samrat Ashok technological Institute Vidisha (M.P.) India. He has 36 years of teaching and research experience. He has guided several M.E. and PHD Theses in manufacturing area specially in Advance Production and Computer Integrated Manufacturing. He obtained PhD from Barkhatullah University Bhopal India. Advanced machining processes, flexible manufacturing system, supply chain management, and 3D printing are the fields of his interest. He has authored many journal and conference articles. He has been conducting industrial research projects and training programs in various topics i.e. TQM, Supply chain management, production planning and control, and maintenance management of industrial engineering.Chandra Pal Singh is working as Assistant professor in mechanical Engineering Department in Samrat Ashok technological Institute Vidisha (M.P.) India. He has 18 years of teaching experience. He got PhD in Mechanical Engineering from Maulana Azad National Institute of Technology Bhopal India. Metal Forming, Deep Drawing, Fatigue failure, Finite element analysis are the field of his interest. He has authored several articles that published in International Journals and conference proceedings. He is currently supervising many PG students who are conducting cutting edge research in advanced manufacturing field. Kapil Gupta is working as Associate Professor in the Dept. of Mechanical and Industrial Engineering Technology at the University of Johannesburg. He obtained Ph.D. in mechanical engineering with specialization in Advanced Manufacturing. Advanced machining processes, sustainable manufacturing, green machining, precision engineering and gear technology are the areas of his interest. He has authored several SCI/ISI Journal and International Conference articles. He has also authored and edited 12 international books on hybrid machining, advanced gear manufacturing, micro and precision manufacturing, and sustainable manufacturing. He is an editorial board member of many international journals. He has also delivered keynote, invited and distinguished speeches in international conferences and symposiums, and seminar talks at international universities. J. Paulo Davim received his PhD degree in Mechanical Engineering in 1997, MSc degree in Mechanical Engineering (Materials and Manufacturing Processes) in 1991, Mechanical Engineering degree (five years) in 1986, from the University of Porto (FEUP), Aggregate title (Full Habilitation) from the University of Coimbra in 2005 and DSc from London Metropolitan University in 2013. He is Eur Ing by FEANI-Brussels and Senior Chartered Engineer by the Portuguese Institution of Engineers with an MBA and Specialist title in Engineering and Industrial Management. Currently, he is a Professor at the Department of Mechanical Engineering of the University of Aveiro, Portugal. He has more than 30 years of teaching and research experience in manufacturing, materials, mechanical and industrial engineering with special emphasis in machining and tribology. He has also interest in management, engineering education and higher education for sustainability.

• Section 1: Advances in Manufacturing Engineering. 1. Advanced and Sustainable Manufacturing. 2. Micro-Machining. 3. Green Manufacturing. 4. Precision Engineering. 5. 3D Printing. 6. Bio-Manufacturing. 7. Surface Engineering. Advanced Materials Processing. 8. Smart Materials. 9. Fabrication and Processing of Biomaterials. 10. Light Metals and Alloys. 11. Intelligent Machining and Processing of Difficult-to-Cut Materials. Section 2: Advances in Industrial Engineering. 12. Advances in Quality and Operations Management. 13. Developments in Supply Chain Management. 14. Lean Manufacturing. 15. Six Sigma Advancements. 16. Integration of Industrial Engineering Technologies for Process Productivity and Quality. 17. Advanced Manufacturing Systems. 18. Recent Developments in Material Handling. 19. Industry 4.0 and Industrial Engineering. Section 3: Industry 4.0 Interventions. 20. Application of Artificial Intelligence in Manufacturing and Industrial Engineering. 21.Smart Manufacturing. 22. Mechatronics and Robotics. 23. CAD-CAM. 24. Virtual Manufacturing. 25. Manufacturing and Industrial Engineering education and Industry 4.0. Section 4: Other Advanced Technologies.

Pankaj Agarwal is working as Professor in mechanical Engineering Department in Samrat Ashok technological Institute Vidisha (M.P.) India. He got PhD in Mechanical Engineering from BU Bhopal India. Currently, he is the HOD mechanical engineering. Advanced machining processes, Micro manufacturing, sustainable manufacturing, 3D printing are the field of interest. He has authored many articles in Journals and International conferences. He is having a vast experience of more than 25 years in research, teaching , and training in the field of mechanical and industrial engineering. Lokesh Bajpai is working as Professor in Mechanical Engineering Department at Samrat Ashok technological Institute Vidisha (M.P.) India. He has 36 years of teaching and research experience. He has guided several M.E. and PHD Theses in manufacturing area specially in Advance Production and Computer Integrated Manufacturing. He obtained PhD from Barkhatullah University Bhopal India. Advanced machining processes, flexible manufacturing system, supply chain management, and 3D printing are the fields of his interest. He has authored many journal and conference articles. He has been conducting industrial research projects and training programs in various topics i.e. TQM, Supply chain management, production planning and control, and maintenance management of industrial engineering.Chandra Pal Singh is working as Assistant professor in mechanical Engineering Department in Samrat Ashok technological Institute Vidisha (M.P.) India. He has 18 years of teaching experience. He got PhD in Mechanical Engineering from Maulana Azad National Institute of Technology Bhopal India. Metal Forming, Deep Drawing, Fatigue failure, Finite element analysis are the field of his interest. He has authored several articles that published in International Journals and conference proceedings. He is currently supervising many PG students who are conducting cutting edge research in advanced manufacturing field. Kapil Gupta is working as Associate Professor in the Dept. of Mechanical and Industrial Engineering Technology at the University of Johannesburg. He obtained Ph.D. in mechanical engineering with specialization in Advanced Manufacturing. Advanced machining processes, sustainable manufacturing, green machining, precision engineering and gear technology are the areas of his interest. He has authored several SCI/ISI Journal and International Conference articles. He has also authored and edited 12 international books on hybrid machining, advanced gear manufacturing, micro and precision manufacturing, and sustainable manufacturing. He is an editorial board member of many international journals. He has also delivered keynote, invited and distinguished speeches in international conferences and symposiums, and seminar talks at international universities. J. Paulo Davim received his PhD degree in Mechanical Engineering in 1997, MSc degree in Mechanical Engineering (Materials and Manufacturing Processes) in 1991, Mechanical Engineering degree (five years) in 1986, from the University of Porto (FEUP), Aggregate title (Full Habilitation) from the University of Coimbra in 2005 and DSc from London Metropolitan University in 2013. He is Eur Ing by FEANI-Brussels and Senior Chartered Engineer by the Portuguese Institution of Engineers with an MBA and Specialist title in Engineering and Industrial Management. Currently, he is a Professor at the Department of Mechanical Engineering of the University of Aveiro, Portugal. He has more than 30 years of teaching and research experience in manufacturing, materials, mechanical and industrial engineering with special emphasis in machining and tribology. He has also interest in management, engineering education and higher education for sustainability.

• Section 1: Advances in Manufacturing Engineering. 1. Advanced and Sustainable Manufacturing. 2. Micro-Machining. 3. Green Manufacturing. 4. Precision Engineering. 5. 3D Printing. 6. Bio-Manufacturing. 7. Surface Engineering. Advanced Materials Processing. 8. Smart Materials. 9. Fabrication and Processing of Biomaterials. 10. Light Metals and Alloys. 11. Intelligent Machining and Processing of Difficult-to-Cut Materials. Section 2: Advances in Industrial Engineering. 12. Advances in Quality and Operations Management. 13. Developments in Supply Chain Management. 14. Lean Manufacturing. 15. Six Sigma Advancements. 16. Integration of Industrial Engineering Technologies for Process Productivity and Quality. 17. Advanced Manufacturing Systems. 18. Recent Developments in Material Handling. 19. Industry 4.0 and Industrial Engineering. Section 3: Industry 4.0 Interventions. 20. Application of Artificial Intelligence in Manufacturing and Industrial Engineering. 21.Smart Manufacturing. 22. Mechatronics and Robotics. 23. CAD-CAM. 24. Virtual Manufacturing. 25. Manufacturing and Industrial Engineering education and Industry 4.0. Section 4: Other Advanced Technologies.

Pankaj Agarwal is working as Professor in mechanical Engineering Department in Samrat Ashok technological Institute Vidisha (M.P.) India. He got PhD in Mechanical Engineering from BU Bhopal India. Currently, he is the HOD mechanical engineering. Advanced machining processes, Micro manufacturing, sustainable manufacturing, 3D printing are the field of interest. He has authored many articles in Journals and International conferences. He is having a vast experience of more than 25 years in research, teaching , and training in the field of mechanical and industrial engineering. Lokesh Bajpai is working as Professor in Mechanical Engineering Department at Samrat Ashok technological Institute Vidisha (M.P.) India. He has 36 years of teaching and research experience. He has guided several M.E. and PHD Theses in manufacturing area specially in Advance Production and Computer Integrated Manufacturing. He obtained PhD from Barkhatullah University Bhopal India. Advanced machining processes, flexible manufacturing system, supply chain management, and 3D printing are the fields of his interest. He has authored many journal and conference articles. He has been conducting industrial research projects and training programs in various topics i.e. TQM, Supply chain management, production planning and control, and maintenance management of industrial engineering.Chandra Pal Singh is working as Assistant professor in mechanical Engineering Department in Samrat Ashok technological Institute Vidisha (M.P.) India. He has 18 years of teaching experience. He got PhD in Mechanical Engineering from Maulana Azad National Institute of Technology Bhopal India. Metal Forming, Deep Drawing, Fatigue failure, Finite element analysis are the field of his interest. He has authored several articles that published in International Journals and conference proceedings. He is currently supervising many PG students who are conducting cutting edge research in advanced manufacturing field. Kapil Gupta is working as Associate Professor in the Dept. of Mechanical and Industrial Engineering Technology at the University of Johannesburg. He obtained Ph.D. in mechanical engineering with specialization in Advanced Manufacturing. Advanced machining processes, sustainable manufacturing, green machining, precision engineering and gear technology are the areas of his interest. He has authored several SCI/ISI Journal and International Conference articles. He has also authored and edited 12 international books on hybrid machining, advanced gear manufacturing, micro and precision manufacturing, and sustainable manufacturing. He is an editorial board member of many international journals. He has also delivered keynote, invited and distinguished speeches in international conferences and symposiums, and seminar talks at international universities. J. Paulo Davim received his PhD degree in Mechanical Engineering in 1997, MSc degree in Mechanical Engineering (Materials and Manufacturing Processes) in 1991, Mechanical Engineering degree (five years) in 1986, from the University of Porto (FEUP), Aggregate title (Full Habilitation) from the University of Coimbra in 2005 and DSc from London Metropolitan University in 2013. He is Eur Ing by FEANI-Brussels and Senior Chartered Engineer by the Portuguese Institution of Engineers with an MBA and Specialist title in Engineering and Industrial Management. Currently, he is a Professor at the Department of Mechanical Engineering of the University of Aveiro, Portugal. He has more than 30 years of teaching and research experience in manufacturing, materials, mechanical and industrial engineering with special emphasis in machining and tribology. He has also interest in management, engineering education and higher education for sustainability.

• Section 1: Advances in Manufacturing Engineering. 1. Advanced and Sustainable Manufacturing. 2. Micro-Machining. 3. Green Manufacturing. 4. Precision Engineering. 5. 3D Printing. 6. Bio-Manufacturing. 7. Surface Engineering. Advanced Materials Processing. 8. Smart Materials. 9. Fabrication and Processing of Biomaterials. 10. Light Metals and Alloys. 11. Intelligent Machining and Processing of Difficult-to-Cut Materials. Section 2: Advances in Industrial Engineering. 12. Advances in Quality and Operations Management. 13. Developments in Supply Chain Management. 14. Lean Manufacturing. 15. Six Sigma Advancements. 16. Integration of Industrial Engineering Technologies for Process Productivity and Quality. 17. Advanced Manufacturing Systems. 18. Recent Developments in Material Handling. 19. Industry 4.0 and Industrial Engineering. Section 3: Industry 4.0 Interventions. 20. Application of Artificial Intelligence in Manufacturing and Industrial Engineering. 21.Smart Manufacturing. 22. Mechatronics and Robotics. 23. CAD-CAM. 24. Virtual Manufacturing. 25. Manufacturing and Industrial Engineering education and Industry 4.0. Section 4: Other Advanced Technologies.