Prof. Rotimi Sadiku is currently an Emeritus Professor at the Tshwane University of Technology, Pretoria, South Africa.Professor Emmanuel Rotimi Sadiku started his career as early as in 1976 as assistant Supervisor at the Zaria Industries Limited Nigeria and later received the Nigeria Government Scholarship to pursue a BSc [Hons.] (1980) degree at the University of Strathclyde, Glasgow, Scotland, UK. During this journey, he received numerous awards as best student and then, received the Nigeria government scholarship to pursue his PHD (1986) in Polymer Science at University of Strathclyde. He did a 1½ years postdoctoral fellowship at the CNR/University of Genova, Italy (1989/90) After receiving postdoctoral fellowship award (Swedish Institute Research Fellowship) he joined (1990) the Department of Polymer Technology, Royal Institute of Technology, Stockholm, Sweden. He did spend ½ year at the Faculty of Physics, Freiburg University as Visiting Scientist. In 1999, he later received South African Research Foundation (NRF) Fellowship award to join University of Stellenbosch, Institute for Polymer Science. Dr. Ayodeji Ayoola is an Associate Professor and Head of the Chemical Engineering department in Covenant University, Ota, Nigeria. He has over 18 years of working experience gained from education environment, as a lecturer and research scholar. He is adept in leadership, research, supervision, and academic administration, planning and management. Dr. Ayodeji Ayoola holds a Masters’ degree and a Doctorate in Chemical Engineering obtained from University of Lagos and Covenant University respectively. He has published more than 150 research articles, 4 book-chapters and he currently have a Google Scholar i10-index of 48 and h-index of 20 with a current citation of 1555. While his Scopus page currently indicates 85 documents, h-index of 16 with a current citation of 758. He is a researcher and his research areas of interest include Environmental Engineering, Material Engineering, Material Science, Electrochemistry, Corrosion Mitigation, Renewable Energy Dr. Oluranti Agboola obtained both her Masters’ degree and PhD in chemical Engineering from Tshwane University of Technology, South Africa. Her PhD research focused on the use of nanofiltration membranes for the treatment of mine water by first developing theoretical models to predict the performance of the membranes and the study was confirmed in the laboratory. Following the completion of her PhD, she joined the University of South Africa as a postdoctoral fellow and worked on the fabrication of polypropylene nanocomposite membranes for the treatment of wastewater using melt extrusion method. She is currently an Associate Professor in the Department of Chemical Engineering, Covenant University and currently editing a book project entitled “DESIGN OF FUNCTIONAL POLYMER NANOCOMPOSITES: INTERFACE AND INTERPHASE REACTIONS, COMPATIBILIZATION AND BOND BEHAVIOR, AND FUNCTIONALIZATION PROCEDURES”, to be published by Elsevier in 2025. Prior to that she was a part-tie lecturer at Tshwane University of Technology in 2011-2016. Her main research interests are polymer nanocomposites for membrane synthesis, nanomaterial processing and characterisation and corrosion engineering. She has authored and co-authored over 55 peer reviewed journal articles and 25 fully referred conference papers, contributed chapters in over 20 scientific books. She served a lead guest editor for a special issue in Materials and Corrosion Advancements for the International Journal of Chemical Engineering (Hindawi). She was appointed as the external examiner for post graduate student projects. As an Associate Professor at Covenant University, Nigeria, she worked extensively on the use of waste polyethylene terephthalate (PET) bottles to combat environmental pollution. Different nanoparticles were integrated into the PET polymer membranes to enhance their performance for the treatment of wastewater and the dehydration of natural gas. Additionally, some of her recent publications are (i) Statistical analyses of pore radii on the performance of PET-nanocomposite membranes in the removal of iron and anions from Ibeshe River. Published by South African Journal of Chemical Engineering; (ii) Synthesis of PET-Magnesium Oxide-Chitosan Nanocomposite Membranes for the Dehydration of Natural Gas. Published by Periodica Polytechnica Chemical Engineering

• 1. Introduction to Composite Coatings: Processing, Structure and Morphology2. Material Science and Engineering of Composites for Coating: Interface structure in composite coatings3. Performance of Nanomaterials in Composite Coatings4. Case studies of practical applications of nanocomposites coatings: Successes and challenges of implementing nano-composite coatings in manufacturing processes5. Composite Materials and Thin Film Coating6. Improving thin coatings of steel with inorganic materials at nanoscale level7. Phosphating Techniques: Mechanism, Types and Applications8. Sustainability of multifunctional polymer nanocomposite coatings: Sustainable coatings and multifunctional composite structural properties9. Metal-matrix Composite Coating: Troubleshooting coating defects and optimizing coating properties for industrial applications.10. Composite Coatings in Aerospace and Automobile Industries11. Composite Coatings in Building and Architectural Industries12. Composite Coatings in Biological, Medical and Electrical Industries13. Multi-functionality and Sustainability of Different Composite Coatings14. Corrosion and Composite Coating: Emerging Technology and new coating materials or techniques15. Electrophoretic Deposition, PVD, CVD, deep coating, spin coating: Mechanism and Applications16. Various Applications of Epoxy-hybrid Composite Coatings17. Application of Nanotechnology for Sustainable composites: Design strategy and structure-properties relationship18. Present and Future Advancements in Composite Coatings: Environmental impact and Bio-based composite coatings

Prof. Rotimi Sadiku is currently an Emeritus Professor at the Tshwane University of Technology, Pretoria, South Africa.Professor Emmanuel Rotimi Sadiku started his career as early as in 1976 as assistant Supervisor at the Zaria Industries Limited Nigeria and later received the Nigeria Government Scholarship to pursue a BSc [Hons.] (1980) degree at the University of Strathclyde, Glasgow, Scotland, UK. During this journey, he received numerous awards as best student and then, received the Nigeria government scholarship to pursue his PHD (1986) in Polymer Science at University of Strathclyde. He did a 1½ years postdoctoral fellowship at the CNR/University of Genova, Italy (1989/90) After receiving postdoctoral fellowship award (Swedish Institute Research Fellowship) he joined (1990) the Department of Polymer Technology, Royal Institute of Technology, Stockholm, Sweden. He did spend ½ year at the Faculty of Physics, Freiburg University as Visiting Scientist. In 1999, he later received South African Research Foundation (NRF) Fellowship award to join University of Stellenbosch, Institute for Polymer Science. Dr. Ayodeji Ayoola is an Associate Professor and Head of the Chemical Engineering department in Covenant University, Ota, Nigeria. He has over 18 years of working experience gained from education environment, as a lecturer and research scholar. He is adept in leadership, research, supervision, and academic administration, planning and management. Dr. Ayodeji Ayoola holds a Masters’ degree and a Doctorate in Chemical Engineering obtained from University of Lagos and Covenant University respectively. He has published more than 150 research articles, 4 book-chapters and he currently have a Google Scholar i10-index of 48 and h-index of 20 with a current citation of 1555. While his Scopus page currently indicates 85 documents, h-index of 16 with a current citation of 758. He is a researcher and his research areas of interest include Environmental Engineering, Material Engineering, Material Science, Electrochemistry, Corrosion Mitigation, Renewable Energy Dr. Oluranti Agboola obtained both her Masters’ degree and PhD in chemical Engineering from Tshwane University of Technology, South Africa. Her PhD research focused on the use of nanofiltration membranes for the treatment of mine water by first developing theoretical models to predict the performance of the membranes and the study was confirmed in the laboratory. Following the completion of her PhD, she joined the University of South Africa as a postdoctoral fellow and worked on the fabrication of polypropylene nanocomposite membranes for the treatment of wastewater using melt extrusion method. She is currently an Associate Professor in the Department of Chemical Engineering, Covenant University and currently editing a book project entitled “DESIGN OF FUNCTIONAL POLYMER NANOCOMPOSITES: INTERFACE AND INTERPHASE REACTIONS, COMPATIBILIZATION AND BOND BEHAVIOR, AND FUNCTIONALIZATION PROCEDURES”, to be published by Elsevier in 2025. Prior to that she was a part-tie lecturer at Tshwane University of Technology in 2011-2016. Her main research interests are polymer nanocomposites for membrane synthesis, nanomaterial processing and characterisation and corrosion engineering. She has authored and co-authored over 55 peer reviewed journal articles and 25 fully referred conference papers, contributed chapters in over 20 scientific books. She served a lead guest editor for a special issue in Materials and Corrosion Advancements for the International Journal of Chemical Engineering (Hindawi). She was appointed as the external examiner for post graduate student projects. As an Associate Professor at Covenant University, Nigeria, she worked extensively on the use of waste polyethylene terephthalate (PET) bottles to combat environmental pollution. Different nanoparticles were integrated into the PET polymer membranes to enhance their performance for the treatment of wastewater and the dehydration of natural gas. Additionally, some of her recent publications are (i) Statistical analyses of pore radii on the performance of PET-nanocomposite membranes in the removal of iron and anions from Ibeshe River. Published by South African Journal of Chemical Engineering; (ii) Synthesis of PET-Magnesium Oxide-Chitosan Nanocomposite Membranes for the Dehydration of Natural Gas. Published by Periodica Polytechnica Chemical Engineering

• 1. Introduction to Composite Coatings: Processing, Structure and Morphology2. Material Science and Engineering of Composites for Coating: Interface structure in composite coatings3. Performance of Nanomaterials in Composite Coatings4. Case studies of practical applications of nanocomposites coatings: Successes and challenges of implementing nano-composite coatings in manufacturing processes5. Composite Materials and Thin Film Coating6. Improving thin coatings of steel with inorganic materials at nanoscale level7. Phosphating Techniques: Mechanism, Types and Applications8. Sustainability of multifunctional polymer nanocomposite coatings: Sustainable coatings and multifunctional composite structural properties9. Metal-matrix Composite Coating: Troubleshooting coating defects and optimizing coating properties for industrial applications.10. Composite Coatings in Aerospace and Automobile Industries11. Composite Coatings in Building and Architectural Industries12. Composite Coatings in Biological, Medical and Electrical Industries13. Multi-functionality and Sustainability of Different Composite Coatings14. Corrosion and Composite Coating: Emerging Technology and new coating materials or techniques15. Electrophoretic Deposition, PVD, CVD, deep coating, spin coating: Mechanism and Applications16. Various Applications of Epoxy-hybrid Composite Coatings17. Application of Nanotechnology for Sustainable composites: Design strategy and structure-properties relationship18. Present and Future Advancements in Composite Coatings: Environmental impact and Bio-based composite coatings

Prof. Rotimi Sadiku is currently an Emeritus Professor at the Tshwane University of Technology, Pretoria, South Africa.Professor Emmanuel Rotimi Sadiku started his career as early as in 1976 as assistant Supervisor at the Zaria Industries Limited Nigeria and later received the Nigeria Government Scholarship to pursue a BSc [Hons.] (1980) degree at the University of Strathclyde, Glasgow, Scotland, UK. During this journey, he received numerous awards as best student and then, received the Nigeria government scholarship to pursue his PHD (1986) in Polymer Science at University of Strathclyde. He did a 1½ years postdoctoral fellowship at the CNR/University of Genova, Italy (1989/90) After receiving postdoctoral fellowship award (Swedish Institute Research Fellowship) he joined (1990) the Department of Polymer Technology, Royal Institute of Technology, Stockholm, Sweden. He did spend ½ year at the Faculty of Physics, Freiburg University as Visiting Scientist. In 1999, he later received South African Research Foundation (NRF) Fellowship award to join University of Stellenbosch, Institute for Polymer Science. Dr. Ayodeji Ayoola is an Associate Professor and Head of the Chemical Engineering department in Covenant University, Ota, Nigeria. He has over 18 years of working experience gained from education environment, as a lecturer and research scholar. He is adept in leadership, research, supervision, and academic administration, planning and management. Dr. Ayodeji Ayoola holds a Masters’ degree and a Doctorate in Chemical Engineering obtained from University of Lagos and Covenant University respectively. He has published more than 150 research articles, 4 book-chapters and he currently have a Google Scholar i10-index of 48 and h-index of 20 with a current citation of 1555. While his Scopus page currently indicates 85 documents, h-index of 16 with a current citation of 758. He is a researcher and his research areas of interest include Environmental Engineering, Material Engineering, Material Science, Electrochemistry, Corrosion Mitigation, Renewable Energy Dr. Oluranti Agboola obtained both her Masters’ degree and PhD in chemical Engineering from Tshwane University of Technology, South Africa. Her PhD research focused on the use of nanofiltration membranes for the treatment of mine water by first developing theoretical models to predict the performance of the membranes and the study was confirmed in the laboratory. Following the completion of her PhD, she joined the University of South Africa as a postdoctoral fellow and worked on the fabrication of polypropylene nanocomposite membranes for the treatment of wastewater using melt extrusion method. She is currently an Associate Professor in the Department of Chemical Engineering, Covenant University and currently editing a book project entitled “DESIGN OF FUNCTIONAL POLYMER NANOCOMPOSITES: INTERFACE AND INTERPHASE REACTIONS, COMPATIBILIZATION AND BOND BEHAVIOR, AND FUNCTIONALIZATION PROCEDURES”, to be published by Elsevier in 2025. Prior to that she was a part-tie lecturer at Tshwane University of Technology in 2011-2016. Her main research interests are polymer nanocomposites for membrane synthesis, nanomaterial processing and characterisation and corrosion engineering. She has authored and co-authored over 55 peer reviewed journal articles and 25 fully referred conference papers, contributed chapters in over 20 scientific books. She served a lead guest editor for a special issue in Materials and Corrosion Advancements for the International Journal of Chemical Engineering (Hindawi). She was appointed as the external examiner for post graduate student projects. As an Associate Professor at Covenant University, Nigeria, she worked extensively on the use of waste polyethylene terephthalate (PET) bottles to combat environmental pollution. Different nanoparticles were integrated into the PET polymer membranes to enhance their performance for the treatment of wastewater and the dehydration of natural gas. Additionally, some of her recent publications are (i) Statistical analyses of pore radii on the performance of PET-nanocomposite membranes in the removal of iron and anions from Ibeshe River. Published by South African Journal of Chemical Engineering; (ii) Synthesis of PET-Magnesium Oxide-Chitosan Nanocomposite Membranes for the Dehydration of Natural Gas. Published by Periodica Polytechnica Chemical Engineering

• 1. Introduction to Composite Coatings: Processing, Structure and Morphology2. Material Science and Engineering of Composites for Coating: Interface structure in composite coatings3. Performance of Nanomaterials in Composite Coatings4. Case studies of practical applications of nanocomposites coatings: Successes and challenges of implementing nano-composite coatings in manufacturing processes5. Composite Materials and Thin Film Coating6. Improving thin coatings of steel with inorganic materials at nanoscale level7. Phosphating Techniques: Mechanism, Types and Applications8. Sustainability of multifunctional polymer nanocomposite coatings: Sustainable coatings and multifunctional composite structural properties9. Metal-matrix Composite Coating: Troubleshooting coating defects and optimizing coating properties for industrial applications.10. Composite Coatings in Aerospace and Automobile Industries11. Composite Coatings in Building and Architectural Industries12. Composite Coatings in Biological, Medical and Electrical Industries13. Multi-functionality and Sustainability of Different Composite Coatings14. Corrosion and Composite Coating: Emerging Technology and new coating materials or techniques15. Electrophoretic Deposition, PVD, CVD, deep coating, spin coating: Mechanism and Applications16. Various Applications of Epoxy-hybrid Composite Coatings17. Application of Nanotechnology for Sustainable composites: Design strategy and structure-properties relationship18. Present and Future Advancements in Composite Coatings: Environmental impact and Bio-based composite coatings