Dr. Ramesh Kumar is an Assistant Professor in the Department of Mechanical Engineering at Saharsa College of Engineering, Saharsa, Bihar (under Department of Science and Technology, Government of Bihar), India. He received his PhD degree from the Indian Institute of Technology Guwahati, India. He received his M Tech degree from the Indian Institute of Technology (Indian School of Mines) Dhanbad, Jharkhand, India. He has published several papers in peer-reviewed journals and international conferences in electromagnetics manufacturing. His main research interests include electromagnetics manufacturing, advanced welding technology, bio-mechanics. Dr. Arbind Prasad has completed his Ph.D. (Mechanical Engineering) from Indian Institute of Technology Guwahati, Assam, India. He has earned gold medal in his M. Tech. He is currently working as an Assistant Professor and Head (Mechanical Engineering) in the Department of Science and Technology, Government of Bihar, Posted at Katihar Engineering College, Katihar, Bihar, India. He has one granted patent and filled 3 patents out of his research work. He has 15 international Journal papers, edited 06 books (Wiley Scrivener Publishing and CRC Press (Taylor & Francis) USA), 17 book chapters and 15 reputed international conference papers to his credit. Dr. Arbind Prasad has obtained various prestigious awards such as Sponsored Research Industrial Consultancy (SRIC) award from IIT Kanpur, Best Oral presentation from American Chemical Society, Best paper awards from IIT Guwahati during Research Conclave. He has completed numerous projects funded by state Government. He is an associate editor for International Journal of Materials, Manufacturing and Sustainable Technologies (IJMMST) and early career editor for International Journal of Mathematical, Engineering and Management Sciences (IJMEMS) Indexed in ESCI/Scopus and DOAJ. He is editorial board member of various international journals and acts as active review board member of 10 prestigious (Indexed in SCI/SCIE/Scopus) international journals with high impact factor i.e., Bioengineering, Journal of design, Materials, Journal of functional materials, Polymer, Materials, Molecules etc. He has been invited to deliver talks at various organizations of repute. He has coordinated various faculty development programmes, short term courses, symposium, national seminars and completed research projects sponsored under various Government schemes in India. His main areas of research include resorbable polymer, processing and characterizations, scaffolds, hydrogels, manufacturing, composites, biomaterials, nano materials processing, internal fixation devices, bioimplants etc. He is also a lifetime member of Society of Polymer Science India, Material Research Society of India, Society of Biomaterials and Artificial Organs of India, Asian Polymer Association, and Indian Society of Technical Education.Dr. Ashwani Kumar received Ph.D. (Mechanical Engineering) in the area of Mechanical Vibration and Design. He is currently working as Senior Lecturer, Mechanical Engineering (Gazetted Officer Group B) at Technical Education Department, Uttar Pradesh (under Government of Uttar Pradesh) Kanpur, India since December 2013. He has worked as Assistant Professor in Department of Mechanical Engineering, Graphic Era University Dehradun India from July 2010 to November 2013. He has more than 13 years of research and academic experience. He is Series Editor of 4 book series Advances in Manufacturing, Design and Computational Intelligence Techniques1/ Renewable and Sustainable Energy Developments2/ Smart Innovations and Technological Advancements in Mechanical and Materials Engineering3/ Computational Intelligence and Biomedical Engineering4 published by CRC Press (Taylor & Francis USA)1-3 and Wiley Scrivener Publishing4 USA. He is Editor-in-Chief for International Journal of Materials, Manufacturing and Sustainable Technologies (IJMMST). He is guest editor & editorial board member of 8 international journals and acts as review board member of 20 prestigious (Indexed in SCI/SCIE/Scopus) international journals with high impact factor i.e. Applied Acoustics, Measurement, JESTEC, AJSE, SV-JME, and LAJSS. In addition he has published 100+ research articles in journals, book chapters and conferences. He has authored/co-authored cum edited 20+ books of Mechanical, Materials and Energy Engineering. He has published 2 patents. He is associated with International Conferences as Invited Speaker/ Advisory Board/Review Board member/Program Committee Member. He has delivered many invited talks in webinar, FDP and Workshops. He has been awarded as Best Teacher for excellence in academic and research. He has successfully guided 12 B.Tech., M.Tech and Ph.D. thesis. In administration he is working as coordinator for AICTE, E.O.A., Nodal officer for PMKVY-TI Scheme (Government of India) and internal coordinator for CDTP scheme (Government of Uttar Pradesh). He is currently involved in the research area of AI & ML in Mechanical Engineering, Smart Materials & Manufacturing Techniques, Thermal Energy Storage, Building Efficiency, Renewable Energy Harvesting, Sustainable Transportation and Heavy Vehicle Dynamics.

• Chapter 01Introduction to Sustainable Manufacturing for Industries 4.0Gourhari Chakraborty, Vivek Pandey, Arbind Prasad, Ashwani KumarChapter 02Recent Developments in Joining Technologies of Dissimilar Metal WeldsAbhishek TiwariChapter 03Laser based manufacturing processes: A comprehensive review Kamal Kishore, Pankaj Sharma, Archana, Manoj Kumar SinhaChapter 04Electromagnetic Joining of Aluminium Tube on Three Different Metal Cores Using Double Solenoid CoilRamesh Kumar, Ashish Kumar Rajak, Sachin D KoreChapter 05Aspects of bioabsorbable polymeric composites in Biomedical applicationsArbind Prasad, Amir shaikh, Sriparna De, Ramesh Kumar, Sonika, Manoj Kumar SrivastavaChapter 06Green and Sustainable Manufacturing Processes for Motor Cores in EVT. Aizawa, T. Shiratori Chapter 07Microwave energy for joining of dissimilar metalsSiddharth Tamang, S. AravindanChapter 08Physics behind High Strain Rate Powder CompactionTanuj Vishwakarma, S Janakiraman, Ashish RajakChapter 09Effect of Different Modelling Condition on Finite Element Modelling of Electromagnetic Impact WeldingAlok Singh, Ramesh KumarChapter 10Friction Stir Welding and its AdvancementRituraj Bhattacharjee, Susmita Datta, Tanmoy Medhi, Pankaj BiswasChapter 11Studies on Stellite 6 GTA (Gas Tungsten Arc) Weld Claddings' Microstructural and High Temperature WearAdarsh Prakash, Amandeep Shahi Chapter 12Parametric Selection and Quantitative Optimization Of Process Parameters in Milling using HDDR. Rekha, P. V. Rajesh, N. Baskar, P. Jothi Palavesam

Dr. Ramesh Kumar is an Assistant Professor in the Department of Mechanical Engineering at Saharsa College of Engineering, Saharsa, Bihar (under Department of Science and Technology, Government of Bihar), India. He received his PhD degree from the Indian Institute of Technology Guwahati, India. He received his M Tech degree from the Indian Institute of Technology (Indian School of Mines) Dhanbad, Jharkhand, India. He has published several papers in peer-reviewed journals and international conferences in electromagnetics manufacturing. His main research interests include electromagnetics manufacturing, advanced welding technology, bio-mechanics. Dr. Arbind Prasad has completed his Ph.D. (Mechanical Engineering) from Indian Institute of Technology Guwahati, Assam, India. He has earned gold medal in his M. Tech. He is currently working as an Assistant Professor and Head (Mechanical Engineering) in the Department of Science and Technology, Government of Bihar, Posted at Katihar Engineering College, Katihar, Bihar, India. He has one granted patent and filled 3 patents out of his research work. He has 15 international Journal papers, edited 06 books (Wiley Scrivener Publishing and CRC Press (Taylor & Francis) USA), 17 book chapters and 15 reputed international conference papers to his credit. Dr. Arbind Prasad has obtained various prestigious awards such as Sponsored Research Industrial Consultancy (SRIC) award from IIT Kanpur, Best Oral presentation from American Chemical Society, Best paper awards from IIT Guwahati during Research Conclave. He has completed numerous projects funded by state Government. He is an associate editor for International Journal of Materials, Manufacturing and Sustainable Technologies (IJMMST) and early career editor for International Journal of Mathematical, Engineering and Management Sciences (IJMEMS) Indexed in ESCI/Scopus and DOAJ. He is editorial board member of various international journals and acts as active review board member of 10 prestigious (Indexed in SCI/SCIE/Scopus) international journals with high impact factor i.e., Bioengineering, Journal of design, Materials, Journal of functional materials, Polymer, Materials, Molecules etc. He has been invited to deliver talks at various organizations of repute. He has coordinated various faculty development programmes, short term courses, symposium, national seminars and completed research projects sponsored under various Government schemes in India. His main areas of research include resorbable polymer, processing and characterizations, scaffolds, hydrogels, manufacturing, composites, biomaterials, nano materials processing, internal fixation devices, bioimplants etc. He is also a lifetime member of Society of Polymer Science India, Material Research Society of India, Society of Biomaterials and Artificial Organs of India, Asian Polymer Association, and Indian Society of Technical Education.Dr. Ashwani Kumar received Ph.D. (Mechanical Engineering) in the area of Mechanical Vibration and Design. He is currently working as Senior Lecturer, Mechanical Engineering (Gazetted Officer Group B) at Technical Education Department, Uttar Pradesh (under Government of Uttar Pradesh) Kanpur, India since December 2013. He has worked as Assistant Professor in Department of Mechanical Engineering, Graphic Era University Dehradun India from July 2010 to November 2013. He has more than 13 years of research and academic experience. He is Series Editor of 4 book series Advances in Manufacturing, Design and Computational Intelligence Techniques1/ Renewable and Sustainable Energy Developments2/ Smart Innovations and Technological Advancements in Mechanical and Materials Engineering3/ Computational Intelligence and Biomedical Engineering4 published by CRC Press (Taylor & Francis USA)1-3 and Wiley Scrivener Publishing4 USA. He is Editor-in-Chief for International Journal of Materials, Manufacturing and Sustainable Technologies (IJMMST). He is guest editor & editorial board member of 8 international journals and acts as review board member of 20 prestigious (Indexed in SCI/SCIE/Scopus) international journals with high impact factor i.e. Applied Acoustics, Measurement, JESTEC, AJSE, SV-JME, and LAJSS. In addition he has published 100+ research articles in journals, book chapters and conferences. He has authored/co-authored cum edited 20+ books of Mechanical, Materials and Energy Engineering. He has published 2 patents. He is associated with International Conferences as Invited Speaker/ Advisory Board/Review Board member/Program Committee Member. He has delivered many invited talks in webinar, FDP and Workshops. He has been awarded as Best Teacher for excellence in academic and research. He has successfully guided 12 B.Tech., M.Tech and Ph.D. thesis. In administration he is working as coordinator for AICTE, E.O.A., Nodal officer for PMKVY-TI Scheme (Government of India) and internal coordinator for CDTP scheme (Government of Uttar Pradesh). He is currently involved in the research area of AI & ML in Mechanical Engineering, Smart Materials & Manufacturing Techniques, Thermal Energy Storage, Building Efficiency, Renewable Energy Harvesting, Sustainable Transportation and Heavy Vehicle Dynamics.

• Chapter 01Introduction to Sustainable Manufacturing for Industries 4.0Gourhari Chakraborty, Vivek Pandey, Arbind Prasad, Ashwani KumarChapter 02Recent Developments in Joining Technologies of Dissimilar Metal WeldsAbhishek TiwariChapter 03Laser based manufacturing processes: A comprehensive review Kamal Kishore, Pankaj Sharma, Archana, Manoj Kumar SinhaChapter 04Electromagnetic Joining of Aluminium Tube on Three Different Metal Cores Using Double Solenoid CoilRamesh Kumar, Ashish Kumar Rajak, Sachin D KoreChapter 05Aspects of bioabsorbable polymeric composites in Biomedical applicationsArbind Prasad, Amir shaikh, Sriparna De, Ramesh Kumar, Sonika, Manoj Kumar SrivastavaChapter 06Green and Sustainable Manufacturing Processes for Motor Cores in EVT. Aizawa, T. Shiratori Chapter 07Microwave energy for joining of dissimilar metalsSiddharth Tamang, S. AravindanChapter 08Physics behind High Strain Rate Powder CompactionTanuj Vishwakarma, S Janakiraman, Ashish RajakChapter 09Effect of Different Modelling Condition on Finite Element Modelling of Electromagnetic Impact WeldingAlok Singh, Ramesh KumarChapter 10Friction Stir Welding and its AdvancementRituraj Bhattacharjee, Susmita Datta, Tanmoy Medhi, Pankaj BiswasChapter 11Studies on Stellite 6 GTA (Gas Tungsten Arc) Weld Claddings' Microstructural and High Temperature WearAdarsh Prakash, Amandeep Shahi Chapter 12Parametric Selection and Quantitative Optimization Of Process Parameters in Milling using HDDR. Rekha, P. V. Rajesh, N. Baskar, P. Jothi Palavesam

Dr. Ramesh Kumar is an Assistant Professor in the Department of Mechanical Engineering at Saharsa College of Engineering, Saharsa, Bihar (under Department of Science and Technology, Government of Bihar), India. He received his PhD degree from the Indian Institute of Technology Guwahati, India. He received his M Tech degree from the Indian Institute of Technology (Indian School of Mines) Dhanbad, Jharkhand, India. He has published several papers in peer-reviewed journals and international conferences in electromagnetics manufacturing. His main research interests include electromagnetics manufacturing, advanced welding technology, bio-mechanics. Dr. Arbind Prasad has completed his Ph.D. (Mechanical Engineering) from Indian Institute of Technology Guwahati, Assam, India. He has earned gold medal in his M. Tech. He is currently working as an Assistant Professor and Head (Mechanical Engineering) in the Department of Science and Technology, Government of Bihar, Posted at Katihar Engineering College, Katihar, Bihar, India. He has one granted patent and filled 3 patents out of his research work. He has 15 international Journal papers, edited 06 books (Wiley Scrivener Publishing and CRC Press (Taylor & Francis) USA), 17 book chapters and 15 reputed international conference papers to his credit. Dr. Arbind Prasad has obtained various prestigious awards such as Sponsored Research Industrial Consultancy (SRIC) award from IIT Kanpur, Best Oral presentation from American Chemical Society, Best paper awards from IIT Guwahati during Research Conclave. He has completed numerous projects funded by state Government. He is an associate editor for International Journal of Materials, Manufacturing and Sustainable Technologies (IJMMST) and early career editor for International Journal of Mathematical, Engineering and Management Sciences (IJMEMS) Indexed in ESCI/Scopus and DOAJ. He is editorial board member of various international journals and acts as active review board member of 10 prestigious (Indexed in SCI/SCIE/Scopus) international journals with high impact factor i.e., Bioengineering, Journal of design, Materials, Journal of functional materials, Polymer, Materials, Molecules etc. He has been invited to deliver talks at various organizations of repute. He has coordinated various faculty development programmes, short term courses, symposium, national seminars and completed research projects sponsored under various Government schemes in India. His main areas of research include resorbable polymer, processing and characterizations, scaffolds, hydrogels, manufacturing, composites, biomaterials, nano materials processing, internal fixation devices, bioimplants etc. He is also a lifetime member of Society of Polymer Science India, Material Research Society of India, Society of Biomaterials and Artificial Organs of India, Asian Polymer Association, and Indian Society of Technical Education.Dr. Ashwani Kumar received Ph.D. (Mechanical Engineering) in the area of Mechanical Vibration and Design. He is currently working as Senior Lecturer, Mechanical Engineering (Gazetted Officer Group B) at Technical Education Department, Uttar Pradesh (under Government of Uttar Pradesh) Kanpur, India since December 2013. He has worked as Assistant Professor in Department of Mechanical Engineering, Graphic Era University Dehradun India from July 2010 to November 2013. He has more than 13 years of research and academic experience. He is Series Editor of 4 book series Advances in Manufacturing, Design and Computational Intelligence Techniques1/ Renewable and Sustainable Energy Developments2/ Smart Innovations and Technological Advancements in Mechanical and Materials Engineering3/ Computational Intelligence and Biomedical Engineering4 published by CRC Press (Taylor & Francis USA)1-3 and Wiley Scrivener Publishing4 USA. He is Editor-in-Chief for International Journal of Materials, Manufacturing and Sustainable Technologies (IJMMST). He is guest editor & editorial board member of 8 international journals and acts as review board member of 20 prestigious (Indexed in SCI/SCIE/Scopus) international journals with high impact factor i.e. Applied Acoustics, Measurement, JESTEC, AJSE, SV-JME, and LAJSS. In addition he has published 100+ research articles in journals, book chapters and conferences. He has authored/co-authored cum edited 20+ books of Mechanical, Materials and Energy Engineering. He has published 2 patents. He is associated with International Conferences as Invited Speaker/ Advisory Board/Review Board member/Program Committee Member. He has delivered many invited talks in webinar, FDP and Workshops. He has been awarded as Best Teacher for excellence in academic and research. He has successfully guided 12 B.Tech., M.Tech and Ph.D. thesis. In administration he is working as coordinator for AICTE, E.O.A., Nodal officer for PMKVY-TI Scheme (Government of India) and internal coordinator for CDTP scheme (Government of Uttar Pradesh). He is currently involved in the research area of AI & ML in Mechanical Engineering, Smart Materials & Manufacturing Techniques, Thermal Energy Storage, Building Efficiency, Renewable Energy Harvesting, Sustainable Transportation and Heavy Vehicle Dynamics.

• Chapter 01Introduction to Sustainable Manufacturing for Industries 4.0Gourhari Chakraborty, Vivek Pandey, Arbind Prasad, Ashwani KumarChapter 02Recent Developments in Joining Technologies of Dissimilar Metal WeldsAbhishek TiwariChapter 03Laser based manufacturing processes: A comprehensive review Kamal Kishore, Pankaj Sharma, Archana, Manoj Kumar SinhaChapter 04Electromagnetic Joining of Aluminium Tube on Three Different Metal Cores Using Double Solenoid CoilRamesh Kumar, Ashish Kumar Rajak, Sachin D KoreChapter 05Aspects of bioabsorbable polymeric composites in Biomedical applicationsArbind Prasad, Amir shaikh, Sriparna De, Ramesh Kumar, Sonika, Manoj Kumar SrivastavaChapter 06Green and Sustainable Manufacturing Processes for Motor Cores in EVT. Aizawa, T. Shiratori Chapter 07Microwave energy for joining of dissimilar metalsSiddharth Tamang, S. AravindanChapter 08Physics behind High Strain Rate Powder CompactionTanuj Vishwakarma, S Janakiraman, Ashish RajakChapter 09Effect of Different Modelling Condition on Finite Element Modelling of Electromagnetic Impact WeldingAlok Singh, Ramesh KumarChapter 10Friction Stir Welding and its AdvancementRituraj Bhattacharjee, Susmita Datta, Tanmoy Medhi, Pankaj BiswasChapter 11Studies on Stellite 6 GTA (Gas Tungsten Arc) Weld Claddings' Microstructural and High Temperature WearAdarsh Prakash, Amandeep Shahi Chapter 12Parametric Selection and Quantitative Optimization Of Process Parameters in Milling using HDDR. Rekha, P. V. Rajesh, N. Baskar, P. Jothi Palavesam