Decomposition of the Martensite in Two-Phase Titanium Alloys.- The Investigation of the Titanium Structure after Shock Wave Loading.- Embrittlement and “Spontaneous” Cracking of a Hardened (?+?) Titanium Alloy during Aging.- Transformation in Unstable Beta-Titanium Alloys.- Internal Friction Studies in Stable and Metastable Beta Titanium Alloys.- Aging Characteristics of Beta Titanium Alloys.- Decomposition of the Solid Solution the The All-Beta ?III.- Martensite Formation and Decomposition in Alloys of Titanium Containing ?-Stabilizing Elements.- An Evaluation of Direct Aging to Achieve Optimum Mechanical Properties for the Metastable Beta Ti-8Mo-8V-2Fe-3Al Alloy.- Intensification of Chemical-Thermal Treatment of Titanium and Its Alloys.- Effect of Boronising on Adhesive Wear Characteristics of Titanium.- Antiseizing Properties of Titanium Alloys under Different Chemical and Heat Treatment.- Discussion.- Critical Review Influence of Technological Factors on Structure and Properties of Titanium Alloys.- Structure of Semifinished Alpha + Beta Titanium Alloy Products.- Influence of the Parameters of a Laminated Structure on the Mechanical Properties of Titanium Alloys.- Methods of Refining Coarse-Grained Structures of Titanium Alloys.- The Influence of Polygonized Structure on the Properties of Heat-Treated Beta Titanium Alloys.- Transmission Electron Microscopy Study of Structural Changes Hot Deformation of Titanium Alloys.- Influence of Forging Skin on Fatigue Strength of die Forgings in Ti-6a1-4v Material.- The Influence of Hydrogen on Hot Deformability of Titanium Alloys with Different Phase Compositions.- The Effect of Some Technological Factors on the Structure and Properties of the Equiatomic Titanium-Nickel Alloy.- Thermomechanical Properties and StressCorrosion of RMI Ti-3A1-8V-6Cr-4Mo-4Zr.- Texture Development in ?+ß Titanium Alloys.- The Effect of Phase Transformation on Deformation Texture of ? and (? + ß) Titanium Alloys.- The Formation of Recrystallization Texture in Ti-Al Alloys.- Recrystallization of Ti-Mo Base Beta Alloys.- Annealing Behavior and Strengthening of Ti-6a1-2sn.- Influence of Grain Size on the Ductility of Age-Hardened Titanium Alloys.- Processing and Deformation Studies on Ultrafine Grained Titanium.- Effects of Texture on Deep Drawability of Commercially Pure Titanium Sheet.- Influence of Processing and Heat Treatment on the Anisotropic Properties of Sheet and Strip of Commercially Pure Titanium.- Mechanical Properties of Titanium Alloy Plates.- Effect of Heat Treatment on the Mechanical Properties in an Alpha-Beta Titanium.- The Effect of Heat Treatment on the Fatigue Strength of Ti-6A1-4V.- Effect of Heat Treatment on the Microstructure and Properties of IMI 685.- A Comparative Study of Creep Resistance and Thermal Stability of Alloys “685” and “6242” in Air and in Vacuum.- Effects of TiA16V4 Metallurgical Structures on Fatigue Properties.- The Effect of Variations in Heat Treatment on the Mechanical Properties of an ?+ß Titanium Alloy IMI 550 (Ti-4A1-2Sn-4Mo-0.5Si).- Heat Treatment of Cast Ti-6A1-4V Alloy.- On Titanium Alloy Residual Stress Following Thermodiffusion Saturation.- Discussion.- Critical Review Titanium Alloys for Different Branches of Engineering.- Critical Review Titanium for Engineering Purposes.- Trends in the Development of High-Strength Titanium Alloys.- Principles of Titanium Alloys Complex Alloying.- A Titanium Alloy with Improved Mechanical Resistance Ti-6A1-6V-2Sn-6Zr.- Effect of Impurities on the Working Ability of Ti-6A1-4V Type Alloy.- Ti-6A1-4V forMarine Uses.- Development of a New Moderate Strength, High Fracture Toughness Titanium Alloy: Ti-4.5A1-5Mo-L.5Cr (Corona 5).- The Metallurgical Synthesis of a New Generation of Deep Hardenable Titanium Alloys. The Metastable Beta Ti-Mo-V-Cr-Al System — design and Properties.- Strength and Toughness of Binary Ti-Ni and Ti-Mo Alloys.- The Technological Aspects of Titanium Application in the TU-144 Aircraft Structure.- Ways of Increasing Titanium Alloys High Temperature Strength.- Investigation of Some Properties of VT5L Alloy with Rare Earth Additions.- Characteristics of Commercially Pure Titanium for Power Plant.- The Effect of Carbon on the Behavior of the Beta-Titanium Alloys.- An Investigation of Some Palladium-Titanium Alloys.- A Titanium Alloy for Application in Hot Sodium Chloride Solutions.- On the Performance of Whole-Titanium Made Turbine Condenser.- Manufacture and Properties of Titanium Tubes for Power Station Condensers.- Trends in the Use of Titanium in Heat Exchange.- Titanium Basket Anodes for Metal Refining and Winning.- Recent Advances in Titanium Cathodes.- Discussion.- Critical Review Powder Metallurgy of Titanium.- A Novelty in the Field of Titanium Powder Metallurgy.- Production of Die-Forged Discs from BT9 Alloy Powder.- Production of Titanium Parts, Apparatus and Machinery by Methods of Powder Metallurgy.- Rolling of Titanium Powder and Its Alloys.- The Mechanical Properties of P/M Ti-6A1-4V Alloy.- Dispersion Hardening of Titanium.- Production of High Purity Titanium Powder by Electron Beam Technology.- Comparative Evaluation of Forged Ti-6A1-4V Bar Made from Shot Produced by Rep and CSC Processes.- Critical Review Titanium Matrix Composites.- Investigation of Structure of Titanium Matrix Fiber Composites.- Model Composite (Layered) Materialon the Basis of Titanium.- The Investigation of Solid-Phase Interaction of Titanium with Refractory Compounds.- The Influence of Release Agents on Properties of the Titanium Foil Produced by Vacuum Evaporation.- The Application of TiC and TiN Thick Films by PVD Processes.- Discussion.
