Select Guide Rating

• 1. Prediction of hot flow curves of construction steels by physically-based constitutive equations; 2. Recent advances on bulk tantalum carbide produced by solvothermal synthesis and spark plasma sintering; 3. Removal of lead ions in an aqueous medium with activated carbon fibers; 4. Finite element simulation of steel quench distortion – parametric analysis of processing variables; 5. 3D computational simulation of multi-impact shot peening; 6. Study of aluminum degasification with impeller-injector assisted by physical modeling; 7. Glass ceramic materials of the SiO2-CaO-MgO-Al2 O3 system: structural characterization and fluorine effect; 8. Effect of controlled corrosion attack with HCl acid on the fatigue endurance of aluminum alloy AISI 6063-T5, under rotating bending fatigue tests; 9. The influence of modifiers on the pigmentary properties of titanium dioxide; 10. Phase formation at selective laser synthesis in Al2 O3-TiO2-Y2 O3 powder compositions; 11. Nanostructured ceramic oxides containing ferrite nanoparticles and produced by mechanical milling; 12. Recycled HDPE-tetrapack composites. isothermal crystallization, light scattering and mechanical properties; 13. Effect of boron on the continuous cooling transformation kinetics in a low carbon advanced ultra-high strength steel (A-UHSS); 14. Effect of mechanical activation on the crystallization and properties of iron-rich glass materials; 15. Effects of holding time on haz-softening in resistance spot welded DP980 steels; 16. Effect of slag on mixing time in gas-stirred ladles assisted with a physical model; 17. Synthesis and characterization of ceramic composites of the binary system Ba0.75 Sr0.25 AlSi2.08-Al2 O3; 18. Effect of the ratio Mo/Cr in the precipitation and distribution of carbides in alloyed nodular iron; 19. Decarburization of hot-rolled non-oriented electrical steels; 20. Effect of cooling rate on the formation and distribution of carbides in nodular iron alloyed with Cr; 21. Effects of austenitizing temperature and cooling rate on the phase transformation texture in hot rolled steels; 22. Fracture behavior of heat treated liquid crystalline polymers; 23. Dynamically recrystallized austenitic grain in a low carbon advanced ultra-high strength steel (A-UHSS) microalloyed with boron under hot deformation conditions; 24. Magnetization study of the kinetic arrest of martensitic transformation in As-quenched Ni52.2 Mn34.3 In13.5 melt spun ribbons; 25. Thermal properties of Cu-Hf-Ti metallic glass compositions; 26. On the characterization of eutectic grain growth during solidification.