Professor Naser Mahdavi Tabatabaei received his B.Sc. and the M.Sc. degrees from the University of Tabriz (Tabriz, Iran) and his Ph.D. degree from Iran University of Science and Technology (Tehran, Iran), all in Power Electrical Engineering, in 1989, 1992, and 1997, respectively. Currently, he is Professor in International Organization of IOTPE. He is also an academic member of Power Electrical Engineering at Seraj Higher Education Institute (Tabriz, Iran) and teaches power system analysis, power system operation, and reactive power control. He is General Chair and Secretary of International Conference of ICTPE, Editor-in-Chief of International Journal of IJTPE, and Chairman of International Enterprise of IETPE all supported by IOTPE. He has authored or co-authored 9 books and book chapters, and more than 170 papers in international journals and conference proceedings. His research interests are in the area of power system analysis and control, power quality, energy management systems, ICT in power engineering, and virtual e-learning educational systems. He is a member of the Iranian Association of Electrical and Electronic Engineers (IAEEE).Professor Nicu Bizon received a five-year degree in Electronic Engineering from the University “Polytechnic” of Bucharest, Romania, in 1986, and the Ph.D. degree in Automatic Systems and Control from the same university, in 1996. Currently, he is Professor with the University of Pitesti, Romania, and was Dean of the Faculty of Electronics from 2012 to 2017. He has been Head of the University Research Department (2004–2008) and Executive Director of the Research Centre “Modeling and simulation processes and systems” (2008–2012). His current research interests include power electronic converters, fuel cell and electric vehicles, renewable energy, energy storage system, microgrids, and control and optimization of these systems. He has edited ten books and authored more than 500 papers. He is General Chair and proceedings’ Editor of the “Electronics, Computers and Artificial Intelligence – ECAI” Conference, Editor-in-Chief of Journal of Electrical Engineering, Electronics, Control and Computer Science – JEEECCS, and member of the Editorial/Technical Board of several international journals and conferences. He has been an IEEE senior member from 2016 and was Chair with Management of Technical Activities for IEEE Romania Section (2012).

• Part I: Advanced Numerical Methods.- Advanced Numerical Methods for Equations, Systems Equations and Optimization.- Analysis of Partial Differential Equations in Time Dependent Problems using Finite Difference Methods and the Applications on Engineering.- Theoretical Approaches of Finite Elements Method (FEM).- Advanced Numerical Methods Based on Artificial Intelligence.- Numerical Methods for Solving Nonlinear Equations.- Theoretical Approach to Element Free Galerkin Method and its Mathematical Implementation.- Theoretical Approach to Chebyshev Spectral Collocation Method and its Mathematical Implementation.- Advanced Numerical Methods Based on Optimization.- Posed Inverse Problems in Electrical Engineering Applications.- Part II: Advanced Energy Systems.- An Advanced Energy Systems Based on Energy Hub Concept.- Sustainable Energy Systems Based on the Multi-Energy Sources.- Modeling of Energy Systems for Smart Homes.- Finite Volume Method Used for Numerical Investigations of Electrochemical Devices.- Night Operation of a Solar Chimney Integrated with Spiral Heat Exchanger.- Incorporating of IPFC in Multi-Machine Power System Phillips-Heffron Model.- Techno-Economical Analysis of Energy Storage Systems in Conventional Distribution Networks.- OPAL-RT Technology Used in Automotive Applications for PEMFC.- Part III: Numerical Energy Applications.- Theoretical Techniques for the Exploration of Piezoelectric Harvesters.- Numerical Analysis  of Electromagnetic Fields.- Optimization Methods for Wireless Power Transfer.- Numerical Assessment of Electromagnetic Energy and Forces in Non-Destructive Measurement Devices.- Optimal Integration of Electric Vehicles in Smart Grid Energy Flow.- Numerical Approaches of Biomass Plants Efficiency.- Power and Energy Flow in Cvasi-Stationary Electric and Magnetic Circuits.- Numerical Methods for Analysis of Energy Consumption in Drying Process of Wood.- Design and Energy Efficiency Analysis for Fuel Cell Hybrid Electric Vehicle.- Finite Element Solutions for Magnetic Shielding Power Applications.- Regression Analysis-Based Load Modelling for Electric Distribution Networks.- Finite Element Analysis of Electromagnetic Fields Emitted by Overhead High-Voltage Power Lines.- Design and Finite Element Analysis of Permanent Magnet Synchronous Generator for Wind Turbine.- Power and Energy System Modeling Based on Modified Tellegen Principle.- Self-Tuning Yaw Control Strategy of a Horizontal Axis Wind Turbine based on Machine Learning.- Numerical Methods of the Electric Power Flow in Interconnected Systems.

Professor Naser Mahdavi Tabatabaei received his B.Sc. and the M.Sc. degrees from the University of Tabriz (Tabriz, Iran) and his Ph.D. degree from Iran University of Science and Technology (Tehran, Iran), all in Power Electrical Engineering, in 1989, 1992, and 1997, respectively. Currently, he is Professor in International Organization of IOTPE. He is also an academic member of Power Electrical Engineering at Seraj Higher Education Institute (Tabriz, Iran) and teaches power system analysis, power system operation, and reactive power control. He is General Chair and Secretary of International Conference of ICTPE, Editor-in-Chief of International Journal of IJTPE, and Chairman of International Enterprise of IETPE all supported by IOTPE. He has authored or co-authored 9 books and book chapters, and more than 170 papers in international journals and conference proceedings. His research interests are in the area of power system analysis and control, power quality, energy management systems, ICT in power engineering, and virtual e-learning educational systems. He is a member of the Iranian Association of Electrical and Electronic Engineers (IAEEE).Professor Nicu Bizon received a five-year degree in Electronic Engineering from the University “Polytechnic” of Bucharest, Romania, in 1986, and the Ph.D. degree in Automatic Systems and Control from the same university, in 1996. Currently, he is Professor with the University of Pitesti, Romania, and was Dean of the Faculty of Electronics from 2012 to 2017. He has been Head of the University Research Department (2004–2008) and Executive Director of the Research Centre “Modeling and simulation processes and systems” (2008–2012). His current research interests include power electronic converters, fuel cell and electric vehicles, renewable energy, energy storage system, microgrids, and control and optimization of these systems. He has edited ten books and authored more than 500 papers. He is General Chair and proceedings’ Editor of the “Electronics, Computers and Artificial Intelligence – ECAI” Conference, Editor-in-Chief of Journal of Electrical Engineering, Electronics, Control and Computer Science – JEEECCS, and member of the Editorial/Technical Board of several international journals and conferences. He has been an IEEE senior member from 2016 and was Chair with Management of Technical Activities for IEEE Romania Section (2012).

• Part I: Advanced Numerical Methods.- Advanced Numerical Methods for Equations, Systems Equations and Optimization.- Analysis of Partial Differential Equations in Time Dependent Problems using Finite Difference Methods and the Applications on Engineering.- Theoretical Approaches of Finite Elements Method (FEM).- Advanced Numerical Methods Based on Artificial Intelligence.- Numerical Methods for Solving Nonlinear Equations.- Theoretical Approach to Element Free Galerkin Method and its Mathematical Implementation.- Theoretical Approach to Chebyshev Spectral Collocation Method and its Mathematical Implementation.- Advanced Numerical Methods Based on Optimization.- Posed Inverse Problems in Electrical Engineering Applications.- Part II: Advanced Energy Systems.- An Advanced Energy Systems Based on Energy Hub Concept.- Sustainable Energy Systems Based on the Multi-Energy Sources.- Modeling of Energy Systems for Smart Homes.- Finite Volume Method Used for Numerical Investigations of Electrochemical Devices.- Night Operation of a Solar Chimney Integrated with Spiral Heat Exchanger.- Incorporating of IPFC in Multi-Machine Power System Phillips-Heffron Model.- Techno-Economical Analysis of Energy Storage Systems in Conventional Distribution Networks.- OPAL-RT Technology Used in Automotive Applications for PEMFC.- Part III: Numerical Energy Applications.- Theoretical Techniques for the Exploration of Piezoelectric Harvesters.- Numerical Analysis  of Electromagnetic Fields.- Optimization Methods for Wireless Power Transfer.- Numerical Assessment of Electromagnetic Energy and Forces in Non-Destructive Measurement Devices.- Optimal Integration of Electric Vehicles in Smart Grid Energy Flow.- Numerical Approaches of Biomass Plants Efficiency.- Power and Energy Flow in Cvasi-Stationary Electric and Magnetic Circuits.- Numerical Methods for Analysis of Energy Consumption in Drying Process of Wood.- Design and Energy Efficiency Analysis for Fuel Cell Hybrid Electric Vehicle.- Finite Element Solutions for Magnetic Shielding Power Applications.- Regression Analysis-Based Load Modelling for Electric Distribution Networks.- Finite Element Analysis of Electromagnetic Fields Emitted by Overhead High-Voltage Power Lines.- Design and Finite Element Analysis of Permanent Magnet Synchronous Generator for Wind Turbine.- Power and Energy System Modeling Based on Modified Tellegen Principle.- Self-Tuning Yaw Control Strategy of a Horizontal Axis Wind Turbine based on Machine Learning.- Numerical Methods of the Electric Power Flow in Interconnected Systems.

Professor Naser Mahdavi Tabatabaei received his B.Sc. and the M.Sc. degrees from the University of Tabriz (Tabriz, Iran) and his Ph.D. degree from Iran University of Science and Technology (Tehran, Iran), all in Power Electrical Engineering, in 1989, 1992, and 1997, respectively. Currently, he is Professor in International Organization of IOTPE. He is also an academic member of Power Electrical Engineering at Seraj Higher Education Institute (Tabriz, Iran) and teaches power system analysis, power system operation, and reactive power control. He is General Chair and Secretary of International Conference of ICTPE, Editor-in-Chief of International Journal of IJTPE, and Chairman of International Enterprise of IETPE all supported by IOTPE. He has authored or co-authored 9 books and book chapters, and more than 170 papers in international journals and conference proceedings. His research interests are in the area of power system analysis and control, power quality, energy management systems, ICT in power engineering, and virtual e-learning educational systems. He is a member of the Iranian Association of Electrical and Electronic Engineers (IAEEE).Professor Nicu Bizon received a five-year degree in Electronic Engineering from the University “Polytechnic” of Bucharest, Romania, in 1986, and the Ph.D. degree in Automatic Systems and Control from the same university, in 1996. Currently, he is Professor with the University of Pitesti, Romania, and was Dean of the Faculty of Electronics from 2012 to 2017. He has been Head of the University Research Department (2004–2008) and Executive Director of the Research Centre “Modeling and simulation processes and systems” (2008–2012). His current research interests include power electronic converters, fuel cell and electric vehicles, renewable energy, energy storage system, microgrids, and control and optimization of these systems. He has edited ten books and authored more than 500 papers. He is General Chair and proceedings’ Editor of the “Electronics, Computers and Artificial Intelligence – ECAI” Conference, Editor-in-Chief of Journal of Electrical Engineering, Electronics, Control and Computer Science – JEEECCS, and member of the Editorial/Technical Board of several international journals and conferences. He has been an IEEE senior member from 2016 and was Chair with Management of Technical Activities for IEEE Romania Section (2012).

• Part I: Advanced Numerical Methods.- Advanced Numerical Methods for Equations, Systems Equations and Optimization.- Analysis of Partial Differential Equations in Time Dependent Problems using Finite Difference Methods and the Applications on Engineering.- Theoretical Approaches of Finite Elements Method (FEM).- Advanced Numerical Methods Based on Artificial Intelligence.- Numerical Methods for Solving Nonlinear Equations.- Theoretical Approach to Element Free Galerkin Method and its Mathematical Implementation.- Theoretical Approach to Chebyshev Spectral Collocation Method and its Mathematical Implementation.- Advanced Numerical Methods Based on Optimization.- Posed Inverse Problems in Electrical Engineering Applications.- Part II: Advanced Energy Systems.- An Advanced Energy Systems Based on Energy Hub Concept.- Sustainable Energy Systems Based on the Multi-Energy Sources.- Modeling of Energy Systems for Smart Homes.- Finite Volume Method Used for Numerical Investigations of Electrochemical Devices.- Night Operation of a Solar Chimney Integrated with Spiral Heat Exchanger.- Incorporating of IPFC in Multi-Machine Power System Phillips-Heffron Model.- Techno-Economical Analysis of Energy Storage Systems in Conventional Distribution Networks.- OPAL-RT Technology Used in Automotive Applications for PEMFC.- Part III: Numerical Energy Applications.- Theoretical Techniques for the Exploration of Piezoelectric Harvesters.- Numerical Analysis  of Electromagnetic Fields.- Optimization Methods for Wireless Power Transfer.- Numerical Assessment of Electromagnetic Energy and Forces in Non-Destructive Measurement Devices.- Optimal Integration of Electric Vehicles in Smart Grid Energy Flow.- Numerical Approaches of Biomass Plants Efficiency.- Power and Energy Flow in Cvasi-Stationary Electric and Magnetic Circuits.- Numerical Methods for Analysis of Energy Consumption in Drying Process of Wood.- Design and Energy Efficiency Analysis for Fuel Cell Hybrid Electric Vehicle.- Finite Element Solutions for Magnetic Shielding Power Applications.- Regression Analysis-Based Load Modelling for Electric Distribution Networks.- Finite Element Analysis of Electromagnetic Fields Emitted by Overhead High-Voltage Power Lines.- Design and Finite Element Analysis of Permanent Magnet Synchronous Generator for Wind Turbine.- Power and Energy System Modeling Based on Modified Tellegen Principle.- Self-Tuning Yaw Control Strategy of a Horizontal Axis Wind Turbine based on Machine Learning.- Numerical Methods of the Electric Power Flow in Interconnected Systems.