Frank Gardea–U.S. Army Research Laboratory, MD, USA; Kunal Mishra–Corning Incorporated, NY, USA; Michael Keller–University of Tulsa, OK, USA

• Chapter 1. Deformation and Flow Characterization of Hybrid Woven Composite Material.- Chapter 2. Development of Recycled Alumix431 based Composites reinforced with TiB2, TiC and B4C Fine Ceramic Powders for Aircraft Applications Produced by Combined Method: Sintering + Forging.- Chapter 3. Static and Fatigue Behaviour of Recycled Thin Sheet “Ti-Al-Nb” based Composites produced by Hot Forging Diffusion Process.- Chapter 4. Development of Self-healing Glass Fiber Reinforced Laminate Composites for Wind Turbine Blades.- Chapter 5. Development of Recycled Aluminium (AA7075+AA1050) Based Hybrid Composites Reinforced with Recycled Rice Husk Produced by Sinter Forging.- Chapter 6. Development of Ni-Al Based Composites Reinforced with Recycled AA7075+AA1050 and Ceramics produced by Sinter Forging Process.- Chapter 7. Design of recycled “A356-A7075” Matrix Composites reinforced with “Nb2Al - Zr” produced by Sinter Forging.- Chapter 8. Dynamic Piezoresistive Behaviour of Composite Materials: Experimental Testing and Analytical Modelling.- Chapter 9. Investigating the Fracture Resistance of Carbon Fiber-PEEK Composites Produced via Fused Filament Fabrication.- Chapter 10. Investigating the Mechanical Performance of Vitrimers reinforced with Hollow Glass Beads using Digital Image Correlation Technique.- Chapter 11. Intermediate Strain Rate Behavior of a Polymer-Particle Composite with High Solids Loading.- Chapter 12. Mesoscale Modeling to Predict Dynamic Impact Response of Plain Weave Composites.

Frank Gardea–U.S. Army Research Laboratory, MD, USA; Kunal Mishra–Corning Incorporated, NY, USA; Michael Keller–University of Tulsa, OK, USA

• Chapter 1. Deformation and Flow Characterization of Hybrid Woven Composite Material.- Chapter 2. Development of Recycled Alumix431 based Composites reinforced with TiB2, TiC and B4C Fine Ceramic Powders for Aircraft Applications Produced by Combined Method: Sintering + Forging.- Chapter 3. Static and Fatigue Behaviour of Recycled Thin Sheet “Ti-Al-Nb” based Composites produced by Hot Forging Diffusion Process.- Chapter 4. Development of Self-healing Glass Fiber Reinforced Laminate Composites for Wind Turbine Blades.- Chapter 5. Development of Recycled Aluminium (AA7075+AA1050) Based Hybrid Composites Reinforced with Recycled Rice Husk Produced by Sinter Forging.- Chapter 6. Development of Ni-Al Based Composites Reinforced with Recycled AA7075+AA1050 and Ceramics produced by Sinter Forging Process.- Chapter 7. Design of recycled “A356-A7075” Matrix Composites reinforced with “Nb2Al - Zr” produced by Sinter Forging.- Chapter 8. Dynamic Piezoresistive Behaviour of Composite Materials: Experimental Testing and Analytical Modelling.- Chapter 9. Investigating the Fracture Resistance of Carbon Fiber-PEEK Composites Produced via Fused Filament Fabrication.- Chapter 10. Investigating the Mechanical Performance of Vitrimers reinforced with Hollow Glass Beads using Digital Image Correlation Technique.- Chapter 11. Intermediate Strain Rate Behavior of a Polymer-Particle Composite with High Solids Loading.- Chapter 12. Mesoscale Modeling to Predict Dynamic Impact Response of Plain Weave Composites.

Frank Gardea–U.S. Army Research Laboratory, MD, USA; Kunal Mishra–Corning Incorporated, NY, USA; Michael Keller–University of Tulsa, OK, USA

• Chapter 1. Deformation and Flow Characterization of Hybrid Woven Composite Material.- Chapter 2. Development of Recycled Alumix431 based Composites reinforced with TiB2, TiC and B4C Fine Ceramic Powders for Aircraft Applications Produced by Combined Method: Sintering + Forging.- Chapter 3. Static and Fatigue Behaviour of Recycled Thin Sheet “Ti-Al-Nb” based Composites produced by Hot Forging Diffusion Process.- Chapter 4. Development of Self-healing Glass Fiber Reinforced Laminate Composites for Wind Turbine Blades.- Chapter 5. Development of Recycled Aluminium (AA7075+AA1050) Based Hybrid Composites Reinforced with Recycled Rice Husk Produced by Sinter Forging.- Chapter 6. Development of Ni-Al Based Composites Reinforced with Recycled AA7075+AA1050 and Ceramics produced by Sinter Forging Process.- Chapter 7. Design of recycled “A356-A7075” Matrix Composites reinforced with “Nb2Al - Zr” produced by Sinter Forging.- Chapter 8. Dynamic Piezoresistive Behaviour of Composite Materials: Experimental Testing and Analytical Modelling.- Chapter 9. Investigating the Fracture Resistance of Carbon Fiber-PEEK Composites Produced via Fused Filament Fabrication.- Chapter 10. Investigating the Mechanical Performance of Vitrimers reinforced with Hollow Glass Beads using Digital Image Correlation Technique.- Chapter 11. Intermediate Strain Rate Behavior of a Polymer-Particle Composite with High Solids Loading.- Chapter 12. Mesoscale Modeling to Predict Dynamic Impact Response of Plain Weave Composites.