Dr. Mourad Boutahir is a professor at Moulay Ismail University in Morocco, specializing in the development of molecular dynamics and ab initio computational methods. He obtained his Ph.D. in Advanced Materials and Applications from the Faculty of Sciences at Morocco's LEM2A laboratory in 2017. Following this, he conducted a postdoctoral research project under the guidance of Dr. José Mejia Lopez at the Center of Nanotechnology and Advanced Materials Investigation (CIEN-UC) in Chile. His postdoctoral work focused on materials design for highly efficient and reliable hydrogen and energy storage devices. Dr. Boutahir aspires to become a leading scientist in academic research, industry, or non-profit institutions, specifically in the field of solar cells. He has a strong computational background and expertise in solar PV design, aiming to contribute to future advancements in solar cell technology. With over 35 research articles published in reputable SCI(E) journals and more than 200 citations, his scholarly contributions have been widely recognized.Dr. El Mehdi El Khattabi is a founder of the consulting office SOLAR UTION and possesses extensive experience as a professional trainer in energy efficiency, thermal housing, solar pumping, and renewable energy. He has acquired his expertise at national institutions such as the University Al Akhawayn Ifrane, the Ministry of Equipment, and prominent industrial sectors like Saint-Gobain and Strugal. Dr. El Khattabi has also contributed internationally through academic institutions such as the Technical University of Lithuania (VGTU) and the University of Lorraine. His research focuses on monitoring, utilization, and measurement of energy efficiency in real-life building scenarios. He has a particular interest in energy diagnostic processes and innovative techniques for optimizing energy system performance based on specific climatic conditions and local resources. Currently, Dr. El Khattabi serves as a professor at the University Moulay Ismaïl of Meknes, further contributing to academia and advancing sustainable energy practices.

• 1. Seismic fragility analysis of reinforced concrete structures using pushover-based method.- 2. Investigation into the damage analysis of Acrylonitrile Butadiene Styrene (ABS) specimens, involving both static damage study and a unified theory approach to predict the material's lifespan.- 3.Transverse vibration analysis of functionally graded beams with magnetostrictive layers of Terfenol-D on a Winkler foundation using the finite element method.- 4. Analysis of the transverse vibrations of a carbon nanotube resting on a Winkler foundation subjected to low temperature thermal load.- 5. First principal investigation of Structural electronic properties of hybrid oorganic-inorganic perovskite [NH3-(CH2)4-NH3]MCl4 compound.- 6. Study and Analysis of the Free Transverse Vibration of Two Beams Coupled by an Elastic System Formed by a Double Spring-Mass.- 7. Different Measurement Modes of a GPR radar for a Homogeneous Isotropic medium Using the FDTD and ETD Methods.- 8. A Review on the Dynamics of Metal-Insulator Transitions of Vanadium Dioxide.- 9. Computational study of vertical falling film absorber working in a LiBr-H2O absorption refrigeration system.- 10. Modelling and Simulation of the Influence of 3D Printing Parameters on Crack Propagation: Filament Orientation.- 11.  Review of Recent Results of Methods for Estimating the State of Charge of Li-ion   Batteries for Electric Vehicles.- 12. Evaluation of sanitation pipe quality through infrared spectroscopy: Identification of compounds and examination of structural alterations due to aging induced by sulfated solutions.- 13. Treatment of Volatile Organic Compounds (VOCs) by Condensation.-14. Exploring the Electronic Transport Characteristics of Single-Walled Carbon Nanotubes with Donor-Acceptor Characteristics, filled with Caffeine Molecules.- 15. Raman Active Modes of black phosphorene and phosphorene nanoribbons (PNRs).- 16. The technical impacts of the emergence of renewables energies decentralized in the distribution grid (MV).- 17. Low-Cost Polymer-Graphene Oxide Nanocomposite-Based Nanofiltration Membranes for Dyes and Heavy Metals Removal.- 18. Realization of a digital teslameter based on an analog low-cost Hall effect sensor.

Dr. Mourad Boutahir is a professor at Moulay Ismail University in Morocco, specializing in the development of molecular dynamics and ab initio computational methods. He obtained his Ph.D. in Advanced Materials and Applications from the Faculty of Sciences at Morocco's LEM2A laboratory in 2017. Following this, he conducted a postdoctoral research project under the guidance of Dr. José Mejia Lopez at the Center of Nanotechnology and Advanced Materials Investigation (CIEN-UC) in Chile. His postdoctoral work focused on materials design for highly efficient and reliable hydrogen and energy storage devices. Dr. Boutahir aspires to become a leading scientist in academic research, industry, or non-profit institutions, specifically in the field of solar cells. He has a strong computational background and expertise in solar PV design, aiming to contribute to future advancements in solar cell technology. With over 35 research articles published in reputable SCI(E) journals and more than 200 citations, his scholarly contributions have been widely recognized.Dr. El Mehdi El Khattabi is a founder of the consulting office SOLAR UTION and possesses extensive experience as a professional trainer in energy efficiency, thermal housing, solar pumping, and renewable energy. He has acquired his expertise at national institutions such as the University Al Akhawayn Ifrane, the Ministry of Equipment, and prominent industrial sectors like Saint-Gobain and Strugal. Dr. El Khattabi has also contributed internationally through academic institutions such as the Technical University of Lithuania (VGTU) and the University of Lorraine. His research focuses on monitoring, utilization, and measurement of energy efficiency in real-life building scenarios. He has a particular interest in energy diagnostic processes and innovative techniques for optimizing energy system performance based on specific climatic conditions and local resources. Currently, Dr. El Khattabi serves as a professor at the University Moulay Ismaïl of Meknes, further contributing to academia and advancing sustainable energy practices.

• 1. Seismic fragility analysis of reinforced concrete structures using pushover-based method.- 2. Investigation into the damage analysis of Acrylonitrile Butadiene Styrene (ABS) specimens, involving both static damage study and a unified theory approach to predict the material's lifespan.- 3.Transverse vibration analysis of functionally graded beams with magnetostrictive layers of Terfenol-D on a Winkler foundation using the finite element method.- 4. Analysis of the transverse vibrations of a carbon nanotube resting on a Winkler foundation subjected to low temperature thermal load.- 5. First principal investigation of Structural electronic properties of hybrid oorganic-inorganic perovskite [NH3-(CH2)4-NH3]MCl4 compound.- 6. Study and Analysis of the Free Transverse Vibration of Two Beams Coupled by an Elastic System Formed by a Double Spring-Mass.- 7. Different Measurement Modes of a GPR radar for a Homogeneous Isotropic medium Using the FDTD and ETD Methods.- 8. A Review on the Dynamics of Metal-Insulator Transitions of Vanadium Dioxide.- 9. Computational study of vertical falling film absorber working in a LiBr-H2O absorption refrigeration system.- 10. Modelling and Simulation of the Influence of 3D Printing Parameters on Crack Propagation: Filament Orientation.- 11.  Review of Recent Results of Methods for Estimating the State of Charge of Li-ion   Batteries for Electric Vehicles.- 12. Evaluation of sanitation pipe quality through infrared spectroscopy: Identification of compounds and examination of structural alterations due to aging induced by sulfated solutions.- 13. Treatment of Volatile Organic Compounds (VOCs) by Condensation.-14. Exploring the Electronic Transport Characteristics of Single-Walled Carbon Nanotubes with Donor-Acceptor Characteristics, filled with Caffeine Molecules.- 15. Raman Active Modes of black phosphorene and phosphorene nanoribbons (PNRs).- 16. The technical impacts of the emergence of renewables energies decentralized in the distribution grid (MV).- 17. Low-Cost Polymer-Graphene Oxide Nanocomposite-Based Nanofiltration Membranes for Dyes and Heavy Metals Removal.- 18. Realization of a digital teslameter based on an analog low-cost Hall effect sensor.

Dr. Mourad Boutahir is a professor at Moulay Ismail University in Morocco, specializing in the development of molecular dynamics and ab initio computational methods. He obtained his Ph.D. in Advanced Materials and Applications from the Faculty of Sciences at Morocco's LEM2A laboratory in 2017. Following this, he conducted a postdoctoral research project under the guidance of Dr. José Mejia Lopez at the Center of Nanotechnology and Advanced Materials Investigation (CIEN-UC) in Chile. His postdoctoral work focused on materials design for highly efficient and reliable hydrogen and energy storage devices. Dr. Boutahir aspires to become a leading scientist in academic research, industry, or non-profit institutions, specifically in the field of solar cells. He has a strong computational background and expertise in solar PV design, aiming to contribute to future advancements in solar cell technology. With over 35 research articles published in reputable SCI(E) journals and more than 200 citations, his scholarly contributions have been widely recognized.Dr. El Mehdi El Khattabi is a founder of the consulting office SOLAR UTION and possesses extensive experience as a professional trainer in energy efficiency, thermal housing, solar pumping, and renewable energy. He has acquired his expertise at national institutions such as the University Al Akhawayn Ifrane, the Ministry of Equipment, and prominent industrial sectors like Saint-Gobain and Strugal. Dr. El Khattabi has also contributed internationally through academic institutions such as the Technical University of Lithuania (VGTU) and the University of Lorraine. His research focuses on monitoring, utilization, and measurement of energy efficiency in real-life building scenarios. He has a particular interest in energy diagnostic processes and innovative techniques for optimizing energy system performance based on specific climatic conditions and local resources. Currently, Dr. El Khattabi serves as a professor at the University Moulay Ismaïl of Meknes, further contributing to academia and advancing sustainable energy practices.

• 1. Seismic fragility analysis of reinforced concrete structures using pushover-based method.- 2. Investigation into the damage analysis of Acrylonitrile Butadiene Styrene (ABS) specimens, involving both static damage study and a unified theory approach to predict the material's lifespan.- 3.Transverse vibration analysis of functionally graded beams with magnetostrictive layers of Terfenol-D on a Winkler foundation using the finite element method.- 4. Analysis of the transverse vibrations of a carbon nanotube resting on a Winkler foundation subjected to low temperature thermal load.- 5. First principal investigation of Structural electronic properties of hybrid oorganic-inorganic perovskite [NH3-(CH2)4-NH3]MCl4 compound.- 6. Study and Analysis of the Free Transverse Vibration of Two Beams Coupled by an Elastic System Formed by a Double Spring-Mass.- 7. Different Measurement Modes of a GPR radar for a Homogeneous Isotropic medium Using the FDTD and ETD Methods.- 8. A Review on the Dynamics of Metal-Insulator Transitions of Vanadium Dioxide.- 9. Computational study of vertical falling film absorber working in a LiBr-H2O absorption refrigeration system.- 10. Modelling and Simulation of the Influence of 3D Printing Parameters on Crack Propagation: Filament Orientation.- 11.  Review of Recent Results of Methods for Estimating the State of Charge of Li-ion   Batteries for Electric Vehicles.- 12. Evaluation of sanitation pipe quality through infrared spectroscopy: Identification of compounds and examination of structural alterations due to aging induced by sulfated solutions.- 13. Treatment of Volatile Organic Compounds (VOCs) by Condensation.-14. Exploring the Electronic Transport Characteristics of Single-Walled Carbon Nanotubes with Donor-Acceptor Characteristics, filled with Caffeine Molecules.- 15. Raman Active Modes of black phosphorene and phosphorene nanoribbons (PNRs).- 16. The technical impacts of the emergence of renewables energies decentralized in the distribution grid (MV).- 17. Low-Cost Polymer-Graphene Oxide Nanocomposite-Based Nanofiltration Membranes for Dyes and Heavy Metals Removal.- 18. Realization of a digital teslameter based on an analog low-cost Hall effect sensor.