The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.

• Part 1. Casting and Solidification: I.- Numerical Simulation on Solidification Structure of 30Cr2Ni4MoV Steel Under Different Temperature Gradient Using Procast Software.- The Influence of Coil Configuration on Fluid Flow and Solidification of Electromagnetically Stirred Aluminum Alloys.- Effect of Hook Formation during Initial Solidification on Distribution of Subsurface Inclusions in Ultralow Carbon Steel Slabs.- Part 2. Casting and Solidification: II.- Numerical Investigation on the Effect of Steel Strip Feeding on Solidification in Continuous Casting.- Numerical Modeling and Experimental Verification of Macrosegregation and CET Predictions in Large Steel Roll Ingots.- Numerical Simulation of Electromagnetic and Heat Transfer Phenomena in Inductively Heated Risers.- Part 3. Processing: I.- A Multiphase CFD Model for the Prediction of Particulate Accumulation in a Laser Powder Bed Fusion Process.- CFD Modelling of High Pressure Gas Atomization of Liquid Metals.- Computational Analysis of Thermo-fluid Dynamics with Metallic Powder in SLM.- Evaporation and Diffusion of Mn in Inert Systems.- Part 4. Processing: II.- Recent Development and Applications of CFD Simulation for Friction Stir Welding.- Modeling of Argon Gas Behavior in Continuous Casting of Steel.- CFD Modeling of Transport Phenomena and Inclusion Removal in a Gas-stirred Ladle.- An Innovative Modeling Approach for Predicting the Desulfurization Kinetics in an Argon-Stirred Ladle Furnace.- Simulation of Non-metallic Inclusion Deposition and Clogging of Nozzle.- Research on the Flow Properties and Erosion Characteristics in Combined Blown Converter at Steelmaking Temperature.- Part 5. Processing: III.- Effect of Carbide Configuration on the Current Distribution in Submerged Arc Furnaces for Silicon Production – A Modelling Approach.- Investigation of Combustion and Heat Transfer in an Industrial Reheating Furnace Using CFD.- Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus Sinensis as nano-additive.- Implementing CFD Modelling to Address Defect Formation in Core Injection Moulding.- Numerical Simulation of Turbulence Flow and Solidification in a Bloom Continuous Casting Mould with Electromagnetic Stirring.- Numerical Analysis of Heat and Mass Transfer on the Self-densification of Metal Hydride Tank.

The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.

• Part 1. Casting and Solidification: I.- Numerical Simulation on Solidification Structure of 30Cr2Ni4MoV Steel Under Different Temperature Gradient Using Procast Software.- The Influence of Coil Configuration on Fluid Flow and Solidification of Electromagnetically Stirred Aluminum Alloys.- Effect of Hook Formation during Initial Solidification on Distribution of Subsurface Inclusions in Ultralow Carbon Steel Slabs.- Part 2. Casting and Solidification: II.- Numerical Investigation on the Effect of Steel Strip Feeding on Solidification in Continuous Casting.- Numerical Modeling and Experimental Verification of Macrosegregation and CET Predictions in Large Steel Roll Ingots.- Numerical Simulation of Electromagnetic and Heat Transfer Phenomena in Inductively Heated Risers.- Part 3. Processing: I.- A Multiphase CFD Model for the Prediction of Particulate Accumulation in a Laser Powder Bed Fusion Process.- CFD Modelling of High Pressure Gas Atomization of Liquid Metals.- Computational Analysis of Thermo-fluid Dynamics with Metallic Powder in SLM.- Evaporation and Diffusion of Mn in Inert Systems.- Part 4. Processing: II.- Recent Development and Applications of CFD Simulation for Friction Stir Welding.- Modeling of Argon Gas Behavior in Continuous Casting of Steel.- CFD Modeling of Transport Phenomena and Inclusion Removal in a Gas-stirred Ladle.- An Innovative Modeling Approach for Predicting the Desulfurization Kinetics in an Argon-Stirred Ladle Furnace.- Simulation of Non-metallic Inclusion Deposition and Clogging of Nozzle.- Research on the Flow Properties and Erosion Characteristics in Combined Blown Converter at Steelmaking Temperature.- Part 5. Processing: III.- Effect of Carbide Configuration on the Current Distribution in Submerged Arc Furnaces for Silicon Production – A Modelling Approach.- Investigation of Combustion and Heat Transfer in an Industrial Reheating Furnace Using CFD.- Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus Sinensis as nano-additive.- Implementing CFD Modelling to Address Defect Formation in Core Injection Moulding.- Numerical Simulation of Turbulence Flow and Solidification in a Bloom Continuous Casting Mould with Electromagnetic Stirring.- Numerical Analysis of Heat and Mass Transfer on the Self-densification of Metal Hydride Tank.

The Minerals, Metals & Materials Society (TMS) is a member-driven international professional society dedicated to fostering the exchange of learning and ideas across the entire range of materials science and engineering, from minerals processing and primary metals production, to basic research and the advanced applications of materials. Included among its nearly 13,000 professional and student members are metallurgical and materials engineers, scientists, researchers, educators, and administrators from more than 70 countries on six continents.

• Part 1. Casting and Solidification: I.- Numerical Simulation on Solidification Structure of 30Cr2Ni4MoV Steel Under Different Temperature Gradient Using Procast Software.- The Influence of Coil Configuration on Fluid Flow and Solidification of Electromagnetically Stirred Aluminum Alloys.- Effect of Hook Formation during Initial Solidification on Distribution of Subsurface Inclusions in Ultralow Carbon Steel Slabs.- Part 2. Casting and Solidification: II.- Numerical Investigation on the Effect of Steel Strip Feeding on Solidification in Continuous Casting.- Numerical Modeling and Experimental Verification of Macrosegregation and CET Predictions in Large Steel Roll Ingots.- Numerical Simulation of Electromagnetic and Heat Transfer Phenomena in Inductively Heated Risers.- Part 3. Processing: I.- A Multiphase CFD Model for the Prediction of Particulate Accumulation in a Laser Powder Bed Fusion Process.- CFD Modelling of High Pressure Gas Atomization of Liquid Metals.- Computational Analysis of Thermo-fluid Dynamics with Metallic Powder in SLM.- Evaporation and Diffusion of Mn in Inert Systems.- Part 4. Processing: II.- Recent Development and Applications of CFD Simulation for Friction Stir Welding.- Modeling of Argon Gas Behavior in Continuous Casting of Steel.- CFD Modeling of Transport Phenomena and Inclusion Removal in a Gas-stirred Ladle.- An Innovative Modeling Approach for Predicting the Desulfurization Kinetics in an Argon-Stirred Ladle Furnace.- Simulation of Non-metallic Inclusion Deposition and Clogging of Nozzle.- Research on the Flow Properties and Erosion Characteristics in Combined Blown Converter at Steelmaking Temperature.- Part 5. Processing: III.- Effect of Carbide Configuration on the Current Distribution in Submerged Arc Furnaces for Silicon Production – A Modelling Approach.- Investigation of Combustion and Heat Transfer in an Industrial Reheating Furnace Using CFD.- Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus Sinensis as nano-additive.- Implementing CFD Modelling to Address Defect Formation in Core Injection Moulding.- Numerical Simulation of Turbulence Flow and Solidification in a Bloom Continuous Casting Mould with Electromagnetic Stirring.- Numerical Analysis of Heat and Mass Transfer on the Self-densification of Metal Hydride Tank.