For internal use only:Professional Experience 2015-present Professor, Phd supervisor Nanjing University of Aeronautics and Astronautics 2014-2015 Research and Development Engineer, Ansys Inc., PA, USA 2013-2014 Research associate Siemens Sheffield University Wind Power Research Centre, UK 2010-2013 Research associate, Sheffield University, UK 2009-2010 Post-doctoral researcher, Memorial University, Newfoundland, CanadaEDUCATION 2010-2013 Ph.D in Electrical Engineering, Sheffield University, UK 2004-2009 Ph.D in Electrical Engineering, Zhejiang University, Hangzhou, China. 2000-2004 B.S. in Automation, China Jiliang University, Hangzhou, ChinaEXPERIENC 2014-2015 Co-simulation between Maxwell and Matlab 2013-2014 PM machine design for wind power 2010-2013 PM machine design for high performance EPS applicationsDemonstrator for the undergraduate student in Sheffield University 2009-2010 High efficiency line-start PM motor design and IPM generator design for wind power 2007-2009 Inverter and DSP controller for high speed sensorless control systems. Technical support of MagneForce motor design software 2007.7-2007.9 Internship position of PM motor design in TECO  2006-2007 Optimization and development of high-speed sensorless permanent magnet motors 2005-2006 Finite element analysis of three-dimension artificial heart pump motor PM machine design for high performance EPS applications Serial DC motor design for electrical machine tools (Bosch Company) 2004-2005 Optimization design of high speed generator for micro-gas turbineAWARDS AND ORGANIZATION 2014-present IEEE Senior member 2012 Best paper awards in international conference and exhibition on ecological vehicles and renewable energy 2009-2010 Excellent plan for Ph.D thesis of Zhejiang Univeristy Excellent graduate student of Zhejiang University 2007-2008 First-Class Scholarship for Excellent Student of Zhejiang University “TECO” Enterprise Scholarship of Zhejiang University “MPS” Enterprise Scholarship of Zhejiang University “Wang Guosong” Scholarship of Zhejiang University Award of Excellent Leadership of Graduate Student of ZhejiangUniversity Award for paper published on Journal of Applied Physics 2000-2004 Excellent Graduate Student of China Jiliang University First-Class Scholarship for Excellent Student of China Jiliang University (4 times)

• General Introduction.- Torque Enhancement of Three Phase Surface-Mounted Permanent Magnet Machine Using 3rd Order Harmonic.- Average Torque Improvement of Three Phase Interior Permanent-Magnet Machine Using 3rd Harmonic in Rotor Shape.- Third Order Harmonic Utilization in In-Wheel Machines to Improve Output Torque.- Influence of Airgap Flux Density Waveform on Optimal Split Ratio and Torque Density of SPM Machines.- Investigation of Stator Flux Density and Iron Loss in 3rd Order Harmonic Shaped Surface-Mounted Permanent Magnet Machines.- Analysis of Cogging Torque in Surface-Mounted Permanent Magnet Machines with Shaped Magnets.- Influence of Harmonics on Radial Force and Vibration of Surface-Mounted Permanent Magnet Machines.- Multi-Objective Optimization of Surface-Mounted Permanent Magnet Machine with Third Harmonic Shaped Rotor.- Using Third Harmonic for Shape Optimization of Flux Density Distribution in Slotless Linear Permanent-Magnet Machine.- Design and Analysis of Permanent Magnet Linear Synchronous Machine with Third Harmonic Shaping Mover.

For internal use only:Professional Experience 2015-present Professor, Phd supervisor Nanjing University of Aeronautics and Astronautics 2014-2015 Research and Development Engineer, Ansys Inc., PA, USA 2013-2014 Research associate Siemens Sheffield University Wind Power Research Centre, UK 2010-2013 Research associate, Sheffield University, UK 2009-2010 Post-doctoral researcher, Memorial University, Newfoundland, CanadaEDUCATION 2010-2013 Ph.D in Electrical Engineering, Sheffield University, UK 2004-2009 Ph.D in Electrical Engineering, Zhejiang University, Hangzhou, China. 2000-2004 B.S. in Automation, China Jiliang University, Hangzhou, ChinaEXPERIENC 2014-2015 Co-simulation between Maxwell and Matlab 2013-2014 PM machine design for wind power 2010-2013 PM machine design for high performance EPS applicationsDemonstrator for the undergraduate student in Sheffield University 2009-2010 High efficiency line-start PM motor design and IPM generator design for wind power 2007-2009 Inverter and DSP controller for high speed sensorless control systems. Technical support of MagneForce motor design software 2007.7-2007.9 Internship position of PM motor design in TECO  2006-2007 Optimization and development of high-speed sensorless permanent magnet motors 2005-2006 Finite element analysis of three-dimension artificial heart pump motor PM machine design for high performance EPS applications Serial DC motor design for electrical machine tools (Bosch Company) 2004-2005 Optimization design of high speed generator for micro-gas turbineAWARDS AND ORGANIZATION 2014-present IEEE Senior member 2012 Best paper awards in international conference and exhibition on ecological vehicles and renewable energy 2009-2010 Excellent plan for Ph.D thesis of Zhejiang Univeristy Excellent graduate student of Zhejiang University 2007-2008 First-Class Scholarship for Excellent Student of Zhejiang University “TECO” Enterprise Scholarship of Zhejiang University “MPS” Enterprise Scholarship of Zhejiang University “Wang Guosong” Scholarship of Zhejiang University Award of Excellent Leadership of Graduate Student of ZhejiangUniversity Award for paper published on Journal of Applied Physics 2000-2004 Excellent Graduate Student of China Jiliang University First-Class Scholarship for Excellent Student of China Jiliang University (4 times)

• General Introduction.- Torque Enhancement of Three Phase Surface-Mounted Permanent Magnet Machine Using 3rd Order Harmonic.- Average Torque Improvement of Three Phase Interior Permanent-Magnet Machine Using 3rd Harmonic in Rotor Shape.- Third Order Harmonic Utilization in In-Wheel Machines to Improve Output Torque.- Influence of Airgap Flux Density Waveform on Optimal Split Ratio and Torque Density of SPM Machines.- Investigation of Stator Flux Density and Iron Loss in 3rd Order Harmonic Shaped Surface-Mounted Permanent Magnet Machines.- Analysis of Cogging Torque in Surface-Mounted Permanent Magnet Machines with Shaped Magnets.- Influence of Harmonics on Radial Force and Vibration of Surface-Mounted Permanent Magnet Machines.- Multi-Objective Optimization of Surface-Mounted Permanent Magnet Machine with Third Harmonic Shaped Rotor.- Using Third Harmonic for Shape Optimization of Flux Density Distribution in Slotless Linear Permanent-Magnet Machine.- Design and Analysis of Permanent Magnet Linear Synchronous Machine with Third Harmonic Shaping Mover.

For internal use only:Professional Experience 2015-present Professor, Phd supervisor Nanjing University of Aeronautics and Astronautics 2014-2015 Research and Development Engineer, Ansys Inc., PA, USA 2013-2014 Research associate Siemens Sheffield University Wind Power Research Centre, UK 2010-2013 Research associate, Sheffield University, UK 2009-2010 Post-doctoral researcher, Memorial University, Newfoundland, CanadaEDUCATION 2010-2013 Ph.D in Electrical Engineering, Sheffield University, UK 2004-2009 Ph.D in Electrical Engineering, Zhejiang University, Hangzhou, China. 2000-2004 B.S. in Automation, China Jiliang University, Hangzhou, ChinaEXPERIENC 2014-2015 Co-simulation between Maxwell and Matlab 2013-2014 PM machine design for wind power 2010-2013 PM machine design for high performance EPS applicationsDemonstrator for the undergraduate student in Sheffield University 2009-2010 High efficiency line-start PM motor design and IPM generator design for wind power 2007-2009 Inverter and DSP controller for high speed sensorless control systems. Technical support of MagneForce motor design software 2007.7-2007.9 Internship position of PM motor design in TECO  2006-2007 Optimization and development of high-speed sensorless permanent magnet motors 2005-2006 Finite element analysis of three-dimension artificial heart pump motor PM machine design for high performance EPS applications Serial DC motor design for electrical machine tools (Bosch Company) 2004-2005 Optimization design of high speed generator for micro-gas turbineAWARDS AND ORGANIZATION 2014-present IEEE Senior member 2012 Best paper awards in international conference and exhibition on ecological vehicles and renewable energy 2009-2010 Excellent plan for Ph.D thesis of Zhejiang Univeristy Excellent graduate student of Zhejiang University 2007-2008 First-Class Scholarship for Excellent Student of Zhejiang University “TECO” Enterprise Scholarship of Zhejiang University “MPS” Enterprise Scholarship of Zhejiang University “Wang Guosong” Scholarship of Zhejiang University Award of Excellent Leadership of Graduate Student of ZhejiangUniversity Award for paper published on Journal of Applied Physics 2000-2004 Excellent Graduate Student of China Jiliang University First-Class Scholarship for Excellent Student of China Jiliang University (4 times)

• General Introduction.- Torque Enhancement of Three Phase Surface-Mounted Permanent Magnet Machine Using 3rd Order Harmonic.- Average Torque Improvement of Three Phase Interior Permanent-Magnet Machine Using 3rd Harmonic in Rotor Shape.- Third Order Harmonic Utilization in In-Wheel Machines to Improve Output Torque.- Influence of Airgap Flux Density Waveform on Optimal Split Ratio and Torque Density of SPM Machines.- Investigation of Stator Flux Density and Iron Loss in 3rd Order Harmonic Shaped Surface-Mounted Permanent Magnet Machines.- Analysis of Cogging Torque in Surface-Mounted Permanent Magnet Machines with Shaped Magnets.- Influence of Harmonics on Radial Force and Vibration of Surface-Mounted Permanent Magnet Machines.- Multi-Objective Optimization of Surface-Mounted Permanent Magnet Machine with Third Harmonic Shaped Rotor.- Using Third Harmonic for Shape Optimization of Flux Density Distribution in Slotless Linear Permanent-Magnet Machine.- Design and Analysis of Permanent Magnet Linear Synchronous Machine with Third Harmonic Shaping Mover.