Dr. Santanu De has been an Assistant Professor at the Department of Mechanical Engineering, IIT Kanpur since December 2014. He received his Bachelor of Engineering from North Bengal University, Darjeeling, West Bengal in 2002, and his M.Tech. from the IIT Kanpur in 2004, both in Mechanical Engineering. He received his Ph.D. in Aerospace Engineering from the Indian Institute of Science, Bangalore in 2012. Prior to his joining the IIT Kanpur, he served two years at Michigan Technological University, Michigan, USA as a postdoctoral research associate, and one year at the Institute of Combustion Technology (ITV), University of Stuttgart, Germany. He also worked as a scientist at the Liquid Propulsion Systems Center, Indian Space Research Organization, Thiruvananthapuram, Kerala. His primary areas of research are numerical modeling of turbulent combustion, spray atomization and combustion, coal gasification and combustion. Prof. Avinash K Agarwal joined IIT Kanpur in 2001. His areas of interest are IC engines, combustion, alternative fuels, conventional fuels, optical diagnostics, laser ignition, HCCI, emission and particulate control, and large bore engines. He has published 230+ international journal and conference papers. Prof. Agarwal is a Fellow of SAE (2012), ASME (2013), ISEES (2015) and INAE (2015). He received several awards such as Prestigious Shanti Swarup Bhatnagar Award-2016 in Engineering Sciences, Rajib Goyal prize-2015, NASI-Reliance Industries Platinum Jubilee Award-2012; INAE Silver Jubilee Young Engineer Award-2012; SAE International’s Ralph R. Teetor Educational Award-2008; INSA Young Scientist Award-2007; UICT Young Scientist Award-2007; INAE Young Engineer Award-2005.Dr. V. S. Moholkar is a Professor of Chemical Engineering and Head of the Center for Energy at the IIT Guwahati. He received his Bachelor’s (1993) and Master’s (1996) degrees in Chemical Engineering from the Institute of Chemical Technology, Mumbai, followed by a Ph.D. from the University of Twente, the Netherlands in 2002. He also headed the Department of Chemical Engineering at the IIT Guwahati from 2012 to 2015. His main research interests are sonochemistry, cavitation assisted physical, chemical and biological processing, and thermo- and biochemical routes to biofuels. He has published more than 120 papers in prominent international journals and holds two patents on hydrodynamic cavitation reactors for biomass pretreatment and bioalcohol synthesis. He is an elected Fellow of the Royal Society of Chemistry (FRSC), a senior member of the AIChE, a Chartered Member of the Institution of Chemical Engineers, UK, and a Chartered Engineer of the Engineering Council, UK.Dr Bhaskar Thallada, FBRS, FRSC is a Principal Scientist and Head of the Thermo-catalytic Processes Area, Biofuels Division (BFD) at the CSIR-Indian Institute of Petroleum, Dehradun, India. He received his Ph.D. from the CSIR-Indian Institute of Chemical Technology (IICT), Hyderabad, and subsequently spent 7 years as a postdoc and member of faculty at Okayama University, Japan. He has published more than 120 articles and 18 book chapters, and holds 13 patents. He serves on the editorial board of five international journals and has edited three books. He received the Distinguished Researcher Award from the AIST, Japan (2013) and the Most Progressive Researcher Award from the FSRJ, Japan (2008).

• Part I Fundamentals of Gasification.- Feedstock Characterization for Gasification and Pyrolysis.- Thermodynamics and Kinetics of Gasification.- Gasifiers: Types, Operational Principles and Commercial.- Hydrodynamics of Circulating Fluidized Bed Systems.- Investigation of Biomass Gasifier Product Gas Composition and its Characterization.- Gas Cleaning and Tar Conversion in Biomass Gasification.- Part II – Experiments, Modeling and Numerical Simulations of Gasification.- Measurement Techniques: Cold Flow Studies.- Cavity Models for Underground Coal Gasification .- Gasification of Mixed Biomass: Analysis Using Equilibrium, Semi-Equilibrium And Kinetic Models.- Numerical Modelling of Fluidized Bed Gasification: An Overview.- Entrained Flow Gasification: Current Status and Numerical Simulations.- Advanced Numerical Methods for the Assessment of Integrated Gasification and CHP Generation Technologies.- Transient Cold Flow Simulation of a Fast Fluidized Bed Fuel Reactor for Chemical Looping Combustion.- Part III - Integration of Renewable Energy and Utilization of Wastes.- Sustainability Assessment of the Biomass Gasification Process for Production of Ammonia.- Recent Advances in Power Generation through Biomass and Municipal Solid Wastes Gasification.- Solar Assisted Gasification-Based Cook Stoves.- Part IV Advanced Technologies of Gasification.- Dual Fluidized Bed Gasification of Solid Fuels.- New Pathways in Clean Combustion of Biomass and Coal Via Partial.- Synergistic Effects in Gasification of Coal/Biomass Blends: Analysis and Review.- Chemical Looping and Plasma Technologies for Gasification of Coal and Biomass.

Dr. Santanu De has been an Assistant Professor at the Department of Mechanical Engineering, IIT Kanpur since December 2014. He received his Bachelor of Engineering from North Bengal University, Darjeeling, West Bengal in 2002, and his M.Tech. from the IIT Kanpur in 2004, both in Mechanical Engineering. He received his Ph.D. in Aerospace Engineering from the Indian Institute of Science, Bangalore in 2012. Prior to his joining the IIT Kanpur, he served two years at Michigan Technological University, Michigan, USA as a postdoctoral research associate, and one year at the Institute of Combustion Technology (ITV), University of Stuttgart, Germany. He also worked as a scientist at the Liquid Propulsion Systems Center, Indian Space Research Organization, Thiruvananthapuram, Kerala. His primary areas of research are numerical modeling of turbulent combustion, spray atomization and combustion, coal gasification and combustion. Prof. Avinash K Agarwal joined IIT Kanpur in 2001. His areas of interest are IC engines, combustion, alternative fuels, conventional fuels, optical diagnostics, laser ignition, HCCI, emission and particulate control, and large bore engines. He has published 230+ international journal and conference papers. Prof. Agarwal is a Fellow of SAE (2012), ASME (2013), ISEES (2015) and INAE (2015). He received several awards such as Prestigious Shanti Swarup Bhatnagar Award-2016 in Engineering Sciences, Rajib Goyal prize-2015, NASI-Reliance Industries Platinum Jubilee Award-2012; INAE Silver Jubilee Young Engineer Award-2012; SAE International’s Ralph R. Teetor Educational Award-2008; INSA Young Scientist Award-2007; UICT Young Scientist Award-2007; INAE Young Engineer Award-2005.Dr. V. S. Moholkar is a Professor of Chemical Engineering and Head of the Center for Energy at the IIT Guwahati. He received his Bachelor’s (1993) and Master’s (1996) degrees in Chemical Engineering from the Institute of Chemical Technology, Mumbai, followed by a Ph.D. from the University of Twente, the Netherlands in 2002. He also headed the Department of Chemical Engineering at the IIT Guwahati from 2012 to 2015. His main research interests are sonochemistry, cavitation assisted physical, chemical and biological processing, and thermo- and biochemical routes to biofuels. He has published more than 120 papers in prominent international journals and holds two patents on hydrodynamic cavitation reactors for biomass pretreatment and bioalcohol synthesis. He is an elected Fellow of the Royal Society of Chemistry (FRSC), a senior member of the AIChE, a Chartered Member of the Institution of Chemical Engineers, UK, and a Chartered Engineer of the Engineering Council, UK.Dr Bhaskar Thallada, FBRS, FRSC is a Principal Scientist and Head of the Thermo-catalytic Processes Area, Biofuels Division (BFD) at the CSIR-Indian Institute of Petroleum, Dehradun, India. He received his Ph.D. from the CSIR-Indian Institute of Chemical Technology (IICT), Hyderabad, and subsequently spent 7 years as a postdoc and member of faculty at Okayama University, Japan. He has published more than 120 articles and 18 book chapters, and holds 13 patents. He serves on the editorial board of five international journals and has edited three books. He received the Distinguished Researcher Award from the AIST, Japan (2013) and the Most Progressive Researcher Award from the FSRJ, Japan (2008).

• Part I Fundamentals of Gasification.- Feedstock Characterization for Gasification and Pyrolysis.- Thermodynamics and Kinetics of Gasification.- Gasifiers: Types, Operational Principles and Commercial.- Hydrodynamics of Circulating Fluidized Bed Systems.- Investigation of Biomass Gasifier Product Gas Composition and its Characterization.- Gas Cleaning and Tar Conversion in Biomass Gasification.- Part II – Experiments, Modeling and Numerical Simulations of Gasification.- Measurement Techniques: Cold Flow Studies.- Cavity Models for Underground Coal Gasification .- Gasification of Mixed Biomass: Analysis Using Equilibrium, Semi-Equilibrium And Kinetic Models.- Numerical Modelling of Fluidized Bed Gasification: An Overview.- Entrained Flow Gasification: Current Status and Numerical Simulations.- Advanced Numerical Methods for the Assessment of Integrated Gasification and CHP Generation Technologies.- Transient Cold Flow Simulation of a Fast Fluidized Bed Fuel Reactor for Chemical Looping Combustion.- Part III - Integration of Renewable Energy and Utilization of Wastes.- Sustainability Assessment of the Biomass Gasification Process for Production of Ammonia.- Recent Advances in Power Generation through Biomass and Municipal Solid Wastes Gasification.- Solar Assisted Gasification-Based Cook Stoves.- Part IV Advanced Technologies of Gasification.- Dual Fluidized Bed Gasification of Solid Fuels.- New Pathways in Clean Combustion of Biomass and Coal Via Partial.- Synergistic Effects in Gasification of Coal/Biomass Blends: Analysis and Review.- Chemical Looping and Plasma Technologies for Gasification of Coal and Biomass.

Dr. Santanu De has been an Assistant Professor at the Department of Mechanical Engineering, IIT Kanpur since December 2014. He received his Bachelor of Engineering from North Bengal University, Darjeeling, West Bengal in 2002, and his M.Tech. from the IIT Kanpur in 2004, both in Mechanical Engineering. He received his Ph.D. in Aerospace Engineering from the Indian Institute of Science, Bangalore in 2012. Prior to his joining the IIT Kanpur, he served two years at Michigan Technological University, Michigan, USA as a postdoctoral research associate, and one year at the Institute of Combustion Technology (ITV), University of Stuttgart, Germany. He also worked as a scientist at the Liquid Propulsion Systems Center, Indian Space Research Organization, Thiruvananthapuram, Kerala. His primary areas of research are numerical modeling of turbulent combustion, spray atomization and combustion, coal gasification and combustion. Prof. Avinash K Agarwal joined IIT Kanpur in 2001. His areas of interest are IC engines, combustion, alternative fuels, conventional fuels, optical diagnostics, laser ignition, HCCI, emission and particulate control, and large bore engines. He has published 230+ international journal and conference papers. Prof. Agarwal is a Fellow of SAE (2012), ASME (2013), ISEES (2015) and INAE (2015). He received several awards such as Prestigious Shanti Swarup Bhatnagar Award-2016 in Engineering Sciences, Rajib Goyal prize-2015, NASI-Reliance Industries Platinum Jubilee Award-2012; INAE Silver Jubilee Young Engineer Award-2012; SAE International’s Ralph R. Teetor Educational Award-2008; INSA Young Scientist Award-2007; UICT Young Scientist Award-2007; INAE Young Engineer Award-2005.Dr. V. S. Moholkar is a Professor of Chemical Engineering and Head of the Center for Energy at the IIT Guwahati. He received his Bachelor’s (1993) and Master’s (1996) degrees in Chemical Engineering from the Institute of Chemical Technology, Mumbai, followed by a Ph.D. from the University of Twente, the Netherlands in 2002. He also headed the Department of Chemical Engineering at the IIT Guwahati from 2012 to 2015. His main research interests are sonochemistry, cavitation assisted physical, chemical and biological processing, and thermo- and biochemical routes to biofuels. He has published more than 120 papers in prominent international journals and holds two patents on hydrodynamic cavitation reactors for biomass pretreatment and bioalcohol synthesis. He is an elected Fellow of the Royal Society of Chemistry (FRSC), a senior member of the AIChE, a Chartered Member of the Institution of Chemical Engineers, UK, and a Chartered Engineer of the Engineering Council, UK.Dr Bhaskar Thallada, FBRS, FRSC is a Principal Scientist and Head of the Thermo-catalytic Processes Area, Biofuels Division (BFD) at the CSIR-Indian Institute of Petroleum, Dehradun, India. He received his Ph.D. from the CSIR-Indian Institute of Chemical Technology (IICT), Hyderabad, and subsequently spent 7 years as a postdoc and member of faculty at Okayama University, Japan. He has published more than 120 articles and 18 book chapters, and holds 13 patents. He serves on the editorial board of five international journals and has edited three books. He received the Distinguished Researcher Award from the AIST, Japan (2013) and the Most Progressive Researcher Award from the FSRJ, Japan (2008).

• Part I Fundamentals of Gasification.- Feedstock Characterization for Gasification and Pyrolysis.- Thermodynamics and Kinetics of Gasification.- Gasifiers: Types, Operational Principles and Commercial.- Hydrodynamics of Circulating Fluidized Bed Systems.- Investigation of Biomass Gasifier Product Gas Composition and its Characterization.- Gas Cleaning and Tar Conversion in Biomass Gasification.- Part II – Experiments, Modeling and Numerical Simulations of Gasification.- Measurement Techniques: Cold Flow Studies.- Cavity Models for Underground Coal Gasification .- Gasification of Mixed Biomass: Analysis Using Equilibrium, Semi-Equilibrium And Kinetic Models.- Numerical Modelling of Fluidized Bed Gasification: An Overview.- Entrained Flow Gasification: Current Status and Numerical Simulations.- Advanced Numerical Methods for the Assessment of Integrated Gasification and CHP Generation Technologies.- Transient Cold Flow Simulation of a Fast Fluidized Bed Fuel Reactor for Chemical Looping Combustion.- Part III - Integration of Renewable Energy and Utilization of Wastes.- Sustainability Assessment of the Biomass Gasification Process for Production of Ammonia.- Recent Advances in Power Generation through Biomass and Municipal Solid Wastes Gasification.- Solar Assisted Gasification-Based Cook Stoves.- Part IV Advanced Technologies of Gasification.- Dual Fluidized Bed Gasification of Solid Fuels.- New Pathways in Clean Combustion of Biomass and Coal Via Partial.- Synergistic Effects in Gasification of Coal/Biomass Blends: Analysis and Review.- Chemical Looping and Plasma Technologies for Gasification of Coal and Biomass.