Prof. Qingxin Yang, president of China Electrotechnical Society, Professor. National Candidate of the New Century Hundred-Thousand-Ten Thousand Talents Project, Provincial-level Young/Middle-aged Expert with Outstanding Contributions, Provincial-level Managed Outstanding Expert, Recipient of the State Council Special Government Allowance. He has previously served as the President of Tianjin Polytechnic University (2014-2018); the President of Tianjin University of Technology (2006-2014).Research Focus (since 1983): Numerical computation of engineering electromagnetic fields and magnetic technology applications.Key Academic Contributions: Developed parameter coupling algorithms for electromagnetic dynamic characteristics; Established finite element methods for 3D permanent magnetic fields with arbitrary magnetization directions; Innovated separation techniques for engineering eddy current and hysteresis losses; Pioneered finite element computation of giant magnetostrictive effects; Created mesh-free methods for electromagnetic field numerical computation; Designed annular permanent magnets for large-diameter Czochralski single crystal furnaces.Dianguo Xu (Fellow, IEEE) received the B.S. degree in control engineering from Harbin Engineering University, Harbin, China, in 1982, and the M.S. and Ph.D. degrees in electrical engineering from Harbin Institute of Technology (HIT), Harbin, China, in 1984 and 1989, respectively. In 1984, he was with the Department of Electrical Engineering, HIT as an Assistant Professor. Since 1994, he has been a Professor with the Department of Electrical Engineering, HIT. He was the Dean of School of Electrical Engineering and Automation, HIT from 2000 to 2010. He was the Vice President of HIT from 2014 to 2020. He authored and coauthored more than 600 technical papers. His research interests include renewable energy generation technology, power quality mitigation, sensorless vector controlled motor drives, high performance servo system. Dr. Xu is a Chair of IEEE Harbin Section, Co-EIC of IEEE Transactions on Power Electronics, Associate Editor for IEEE Transactions on Industrial Electronics and IEEE Journal of Emerging and Selected Topics in Power Electron. Xuerong Ye (Senior Member, IEEE) received the B.S., M.S., and Ph.D. degrees in electrical engineering from Harbin Institute of Technology, Harbin, China, in 2003, 2005, and 2009, respectively. He is currently the Dean of the School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin, China. His main research interests include failure analysis of electric apparatus and electronics, reliability assessment and robust design of quality consistency. Dr. Ye is a Fellow of IET and an Associate Editor for IEEE Access and Journal of Power Electronics.Qiuyue Nie was born in Liaoning, China, in 1982. She received the Ph.D. degree in plasma physics from the Dalian University of Technology, Dalian, China, in 2010. She is currently a Professor with the School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin, China. Her research interests include the plasma generation technologies and their applications.Yueshi Guan (Senior Member, IEEE) was born in Heilongjiang, China, in 1990. He received the B.S., M.S., and Ph.D. degrees in electrical engineering from the Harbin Institute of Technology, Harbin, China, in 2013, 2015, and 2019, respectively. From 2021 to 2024, he was an Associate Professor. Since 2024, he has been a Professor with the Department of Electrical and Electronics Engineering, HIT. His research interests include the areas of high-frequency and very-high-frequency converters, single-stage ac/dc converter, and high conversion ratio converters.

• A Multi-Dimensional Health Evaluation Method for Charging Piles Based on AHP-EWM.- Design of Axial Flux Permanent Magnet Motor for Electric Aircraft.- Short-term Forecasting of Heating-type Electric Load Driven by Data-Knowledge Fusion under Demand Response.- A Dual-Feedback Active CM EMI Filter with cascaded structure.- Off-grid Control of Grid-forming Doubly-fed Wind Power System Based on Model Prediction.- Motor Bearing Fault Diagnosis Based on EMD-CNN-Transformer.- High-precision acetylene detection based on T-type photoacoustic cell and 2f/1f wavelength modulation spectroscopy.- Multi-Objective Coordinated Planning of Flexible Interconnected Distribution Network Considering Supply Restoration.- Reduction of Torque Ripples Caused by Current Measurement Errors for PMSM Drives Considering the Nonlinearity of the Inverter.- Prediction of lithium-ion battery surface temperature based on empirical mode decomposition and Bayesian optimization assisted by CNN-BiLSTM.- Simulation Analysis of Electromagnetic Effects of UHVDC Transmission Lines on Adjacent Metallic Pipelines.- State of Charge Estimation of LiFePO₄ Batteries Based on Improved EKF Algorithm.- Study on Primary Frequency Modulation Control Strategy and Capacity Configuration of Battery-Flywheel Hybrid Energy Storage Auxiliary Thermal Power Unit.- Modeling and Economic Analysis of Molten Salt Thermal Energy Storage for Peak Shaving and Heating in Auxiliary Thermal Power Units.- Low-Light Recognition-Guided Segmentation of Infrared Thermal Images for Power Equipment.

Prof. Qingxin Yang, president of China Electrotechnical Society, Professor. National Candidate of the New Century Hundred-Thousand-Ten Thousand Talents Project, Provincial-level Young/Middle-aged Expert with Outstanding Contributions, Provincial-level Managed Outstanding Expert, Recipient of the State Council Special Government Allowance. He has previously served as the President of Tianjin Polytechnic University (2014-2018); the President of Tianjin University of Technology (2006-2014).Research Focus (since 1983): Numerical computation of engineering electromagnetic fields and magnetic technology applications.Key Academic Contributions: Developed parameter coupling algorithms for electromagnetic dynamic characteristics; Established finite element methods for 3D permanent magnetic fields with arbitrary magnetization directions; Innovated separation techniques for engineering eddy current and hysteresis losses; Pioneered finite element computation of giant magnetostrictive effects; Created mesh-free methods for electromagnetic field numerical computation; Designed annular permanent magnets for large-diameter Czochralski single crystal furnaces.Dianguo Xu (Fellow, IEEE) received the B.S. degree in control engineering from Harbin Engineering University, Harbin, China, in 1982, and the M.S. and Ph.D. degrees in electrical engineering from Harbin Institute of Technology (HIT), Harbin, China, in 1984 and 1989, respectively. In 1984, he was with the Department of Electrical Engineering, HIT as an Assistant Professor. Since 1994, he has been a Professor with the Department of Electrical Engineering, HIT. He was the Dean of School of Electrical Engineering and Automation, HIT from 2000 to 2010. He was the Vice President of HIT from 2014 to 2020. He authored and coauthored more than 600 technical papers. His research interests include renewable energy generation technology, power quality mitigation, sensorless vector controlled motor drives, high performance servo system. Dr. Xu is a Chair of IEEE Harbin Section, Co-EIC of IEEE Transactions on Power Electronics, Associate Editor for IEEE Transactions on Industrial Electronics and IEEE Journal of Emerging and Selected Topics in Power Electron. Xuerong Ye (Senior Member, IEEE) received the B.S., M.S., and Ph.D. degrees in electrical engineering from Harbin Institute of Technology, Harbin, China, in 2003, 2005, and 2009, respectively. He is currently the Dean of the School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin, China. His main research interests include failure analysis of electric apparatus and electronics, reliability assessment and robust design of quality consistency. Dr. Ye is a Fellow of IET and an Associate Editor for IEEE Access and Journal of Power Electronics.Qiuyue Nie was born in Liaoning, China, in 1982. She received the Ph.D. degree in plasma physics from the Dalian University of Technology, Dalian, China, in 2010. She is currently a Professor with the School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin, China. Her research interests include the plasma generation technologies and their applications.Yueshi Guan (Senior Member, IEEE) was born in Heilongjiang, China, in 1990. He received the B.S., M.S., and Ph.D. degrees in electrical engineering from the Harbin Institute of Technology, Harbin, China, in 2013, 2015, and 2019, respectively. From 2021 to 2024, he was an Associate Professor. Since 2024, he has been a Professor with the Department of Electrical and Electronics Engineering, HIT. His research interests include the areas of high-frequency and very-high-frequency converters, single-stage ac/dc converter, and high conversion ratio converters.

• A Multi-Dimensional Health Evaluation Method for Charging Piles Based on AHP-EWM.- Design of Axial Flux Permanent Magnet Motor for Electric Aircraft.- Short-term Forecasting of Heating-type Electric Load Driven by Data-Knowledge Fusion under Demand Response.- A Dual-Feedback Active CM EMI Filter with cascaded structure.- Off-grid Control of Grid-forming Doubly-fed Wind Power System Based on Model Prediction.- Motor Bearing Fault Diagnosis Based on EMD-CNN-Transformer.- High-precision acetylene detection based on T-type photoacoustic cell and 2f/1f wavelength modulation spectroscopy.- Multi-Objective Coordinated Planning of Flexible Interconnected Distribution Network Considering Supply Restoration.- Reduction of Torque Ripples Caused by Current Measurement Errors for PMSM Drives Considering the Nonlinearity of the Inverter.- Prediction of lithium-ion battery surface temperature based on empirical mode decomposition and Bayesian optimization assisted by CNN-BiLSTM.- Simulation Analysis of Electromagnetic Effects of UHVDC Transmission Lines on Adjacent Metallic Pipelines.- State of Charge Estimation of LiFePO₄ Batteries Based on Improved EKF Algorithm.- Study on Primary Frequency Modulation Control Strategy and Capacity Configuration of Battery-Flywheel Hybrid Energy Storage Auxiliary Thermal Power Unit.- Modeling and Economic Analysis of Molten Salt Thermal Energy Storage for Peak Shaving and Heating in Auxiliary Thermal Power Units.- Low-Light Recognition-Guided Segmentation of Infrared Thermal Images for Power Equipment.

Prof. Qingxin Yang, president of China Electrotechnical Society, Professor. National Candidate of the New Century Hundred-Thousand-Ten Thousand Talents Project, Provincial-level Young/Middle-aged Expert with Outstanding Contributions, Provincial-level Managed Outstanding Expert, Recipient of the State Council Special Government Allowance. He has previously served as the President of Tianjin Polytechnic University (2014-2018); the President of Tianjin University of Technology (2006-2014).Research Focus (since 1983): Numerical computation of engineering electromagnetic fields and magnetic technology applications.Key Academic Contributions: Developed parameter coupling algorithms for electromagnetic dynamic characteristics; Established finite element methods for 3D permanent magnetic fields with arbitrary magnetization directions; Innovated separation techniques for engineering eddy current and hysteresis losses; Pioneered finite element computation of giant magnetostrictive effects; Created mesh-free methods for electromagnetic field numerical computation; Designed annular permanent magnets for large-diameter Czochralski single crystal furnaces.Dianguo Xu (Fellow, IEEE) received the B.S. degree in control engineering from Harbin Engineering University, Harbin, China, in 1982, and the M.S. and Ph.D. degrees in electrical engineering from Harbin Institute of Technology (HIT), Harbin, China, in 1984 and 1989, respectively. In 1984, he was with the Department of Electrical Engineering, HIT as an Assistant Professor. Since 1994, he has been a Professor with the Department of Electrical Engineering, HIT. He was the Dean of School of Electrical Engineering and Automation, HIT from 2000 to 2010. He was the Vice President of HIT from 2014 to 2020. He authored and coauthored more than 600 technical papers. His research interests include renewable energy generation technology, power quality mitigation, sensorless vector controlled motor drives, high performance servo system. Dr. Xu is a Chair of IEEE Harbin Section, Co-EIC of IEEE Transactions on Power Electronics, Associate Editor for IEEE Transactions on Industrial Electronics and IEEE Journal of Emerging and Selected Topics in Power Electron. Xuerong Ye (Senior Member, IEEE) received the B.S., M.S., and Ph.D. degrees in electrical engineering from Harbin Institute of Technology, Harbin, China, in 2003, 2005, and 2009, respectively. He is currently the Dean of the School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin, China. His main research interests include failure analysis of electric apparatus and electronics, reliability assessment and robust design of quality consistency. Dr. Ye is a Fellow of IET and an Associate Editor for IEEE Access and Journal of Power Electronics.Qiuyue Nie was born in Liaoning, China, in 1982. She received the Ph.D. degree in plasma physics from the Dalian University of Technology, Dalian, China, in 2010. She is currently a Professor with the School of Electrical Engineering and Automation, Harbin Institute of Technology, Harbin, China. Her research interests include the plasma generation technologies and their applications.Yueshi Guan (Senior Member, IEEE) was born in Heilongjiang, China, in 1990. He received the B.S., M.S., and Ph.D. degrees in electrical engineering from the Harbin Institute of Technology, Harbin, China, in 2013, 2015, and 2019, respectively. From 2021 to 2024, he was an Associate Professor. Since 2024, he has been a Professor with the Department of Electrical and Electronics Engineering, HIT. His research interests include the areas of high-frequency and very-high-frequency converters, single-stage ac/dc converter, and high conversion ratio converters.

• A Multi-Dimensional Health Evaluation Method for Charging Piles Based on AHP-EWM.- Design of Axial Flux Permanent Magnet Motor for Electric Aircraft.- Short-term Forecasting of Heating-type Electric Load Driven by Data-Knowledge Fusion under Demand Response.- A Dual-Feedback Active CM EMI Filter with cascaded structure.- Off-grid Control of Grid-forming Doubly-fed Wind Power System Based on Model Prediction.- Motor Bearing Fault Diagnosis Based on EMD-CNN-Transformer.- High-precision acetylene detection based on T-type photoacoustic cell and 2f/1f wavelength modulation spectroscopy.- Multi-Objective Coordinated Planning of Flexible Interconnected Distribution Network Considering Supply Restoration.- Reduction of Torque Ripples Caused by Current Measurement Errors for PMSM Drives Considering the Nonlinearity of the Inverter.- Prediction of lithium-ion battery surface temperature based on empirical mode decomposition and Bayesian optimization assisted by CNN-BiLSTM.- Simulation Analysis of Electromagnetic Effects of UHVDC Transmission Lines on Adjacent Metallic Pipelines.- State of Charge Estimation of LiFePO₄ Batteries Based on Improved EKF Algorithm.- Study on Primary Frequency Modulation Control Strategy and Capacity Configuration of Battery-Flywheel Hybrid Energy Storage Auxiliary Thermal Power Unit.- Modeling and Economic Analysis of Molten Salt Thermal Energy Storage for Peak Shaving and Heating in Auxiliary Thermal Power Units.- Low-Light Recognition-Guided Segmentation of Infrared Thermal Images for Power Equipment.