V. Bindhu received the B.E. degree in Electronics and Communication Engineering from Bharathiar University, Coimbatore, in 2002, M.E. degree in Applied Electronics from Anna University, Chennai, in 2007, and Ph.D. degree from Anna University, Chennai, in 2014. She has 10 years of teaching experience and 5 years of research experience. Currently, she is a professor at PPG Institute of Technology, Coimbatore. Her areas of interest include signal processing and VLSI design.João Manuel R. S. Tavares has a B.Sc. degree in Mechanical Engineering, M.Sc. and Ph.D. degrees in Electrical and Computer Engineering, and Habilitation in Mechanical Engineering. He is the editor-in-chief of the Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization and Computer Methods in Biomechanics and Biomedical Engineering journals and the editor of the book series Lecture Notes in Computational Vision and Biomechanics.Ştefan Ţălu, the holder of Ph.D. degree in engineering, is currently teaching Descriptive Geometry and Engineering Graphics within the Technical University of Cluj-Napoca, Cluj-Napoca, Romania. He obtained his Ph.D. degree in technical sciences, in 1998, from Technical University of Cluj-Napoca, Romania. He has published 19 books and 380 scientific papers (200 papers as a single author or first author), in journals, at symposia and scientific national and international conferences, in country or abroad, among them 99 papers in Clarivate Analytics indexed journals, with impact factor and relative influence score, 146 papers in international databases, 40 papers at national conference and 95 papers at international conferences, in collaboration with 210 researchers from 27 foreign countries. He is an expert in the following fields: mechanical and tribological characterizations of macro-micro-nanostructures; topographical and morphological characterizations of three-dimensional surfaces; computer-aided engineering and designing industrial processes, and fractal and multifractal geometry applied in technique.

• Experimental Investigation of Tribological Characterization of Bio-Nano-Lubricants.- Effect of Eu3+ on the luminescence and photocatalytic properties of ZnS nanoparticles.- Buckling of stiffened carbon nanotube-reinforced composite (CNTRC) plates.- Experimental Investigation of Machining Parameters of Monel 400 in Powder Mixed EDM Process.- Synthesis of Estolides from Coconut, Sunflower and Karanja Oils.- Innovative methods for increasing the tool life of cutting tools in complex surface treatment.- Nano severe Plastic deformation process on Aluminum Alloy and composites an overview.- Review of Mechanized Garbage-Picking Machines: Challenges and Advancements in Sweeping and Handling of Trash.- Study of Leakage Currents in FinFet SRAM Cells.- Advanced Characterization of Estolides from Coconut, Sunflower and Karanja Oils.- Manufacturing of AlSi10Cu2 Foam using Centrifugal Casting Route and LiAlH4 Foaming Agent.- Synthesis and characterization of nano CuO complexed HPMC:PVA polymer blendelectrolytes.- Study on Effect of Pista Shell as Filler material on Mechanical Performance of Banana fiber Reinforced Polymer Composite.

V. Bindhu received the B.E. degree in Electronics and Communication Engineering from Bharathiar University, Coimbatore, in 2002, M.E. degree in Applied Electronics from Anna University, Chennai, in 2007, and Ph.D. degree from Anna University, Chennai, in 2014. She has 10 years of teaching experience and 5 years of research experience. Currently, she is a professor at PPG Institute of Technology, Coimbatore. Her areas of interest include signal processing and VLSI design.João Manuel R. S. Tavares has a B.Sc. degree in Mechanical Engineering, M.Sc. and Ph.D. degrees in Electrical and Computer Engineering, and Habilitation in Mechanical Engineering. He is the editor-in-chief of the Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization and Computer Methods in Biomechanics and Biomedical Engineering journals and the editor of the book series Lecture Notes in Computational Vision and Biomechanics.Ştefan Ţălu, the holder of Ph.D. degree in engineering, is currently teaching Descriptive Geometry and Engineering Graphics within the Technical University of Cluj-Napoca, Cluj-Napoca, Romania. He obtained his Ph.D. degree in technical sciences, in 1998, from Technical University of Cluj-Napoca, Romania. He has published 19 books and 380 scientific papers (200 papers as a single author or first author), in journals, at symposia and scientific national and international conferences, in country or abroad, among them 99 papers in Clarivate Analytics indexed journals, with impact factor and relative influence score, 146 papers in international databases, 40 papers at national conference and 95 papers at international conferences, in collaboration with 210 researchers from 27 foreign countries. He is an expert in the following fields: mechanical and tribological characterizations of macro-micro-nanostructures; topographical and morphological characterizations of three-dimensional surfaces; computer-aided engineering and designing industrial processes, and fractal and multifractal geometry applied in technique.

• Experimental Investigation of Tribological Characterization of Bio-Nano-Lubricants.- Effect of Eu3+ on the luminescence and photocatalytic properties of ZnS nanoparticles.- Buckling of stiffened carbon nanotube-reinforced composite (CNTRC) plates.- Experimental Investigation of Machining Parameters of Monel 400 in Powder Mixed EDM Process.- Synthesis of Estolides from Coconut, Sunflower and Karanja Oils.- Innovative methods for increasing the tool life of cutting tools in complex surface treatment.- Nano severe Plastic deformation process on Aluminum Alloy and composites an overview.- Review of Mechanized Garbage-Picking Machines: Challenges and Advancements in Sweeping and Handling of Trash.- Study of Leakage Currents in FinFet SRAM Cells.- Advanced Characterization of Estolides from Coconut, Sunflower and Karanja Oils.- Manufacturing of AlSi10Cu2 Foam using Centrifugal Casting Route and LiAlH4 Foaming Agent.- Synthesis and characterization of nano CuO complexed HPMC:PVA polymer blendelectrolytes.- Study on Effect of Pista Shell as Filler material on Mechanical Performance of Banana fiber Reinforced Polymer Composite.

V. Bindhu received the B.E. degree in Electronics and Communication Engineering from Bharathiar University, Coimbatore, in 2002, M.E. degree in Applied Electronics from Anna University, Chennai, in 2007, and Ph.D. degree from Anna University, Chennai, in 2014. She has 10 years of teaching experience and 5 years of research experience. Currently, she is a professor at PPG Institute of Technology, Coimbatore. Her areas of interest include signal processing and VLSI design.João Manuel R. S. Tavares has a B.Sc. degree in Mechanical Engineering, M.Sc. and Ph.D. degrees in Electrical and Computer Engineering, and Habilitation in Mechanical Engineering. He is the editor-in-chief of the Computer Methods in Biomechanics and Biomedical Engineering: Imaging & Visualization and Computer Methods in Biomechanics and Biomedical Engineering journals and the editor of the book series Lecture Notes in Computational Vision and Biomechanics.Ştefan Ţălu, the holder of Ph.D. degree in engineering, is currently teaching Descriptive Geometry and Engineering Graphics within the Technical University of Cluj-Napoca, Cluj-Napoca, Romania. He obtained his Ph.D. degree in technical sciences, in 1998, from Technical University of Cluj-Napoca, Romania. He has published 19 books and 380 scientific papers (200 papers as a single author or first author), in journals, at symposia and scientific national and international conferences, in country or abroad, among them 99 papers in Clarivate Analytics indexed journals, with impact factor and relative influence score, 146 papers in international databases, 40 papers at national conference and 95 papers at international conferences, in collaboration with 210 researchers from 27 foreign countries. He is an expert in the following fields: mechanical and tribological characterizations of macro-micro-nanostructures; topographical and morphological characterizations of three-dimensional surfaces; computer-aided engineering and designing industrial processes, and fractal and multifractal geometry applied in technique.

• Experimental Investigation of Tribological Characterization of Bio-Nano-Lubricants.- Effect of Eu3+ on the luminescence and photocatalytic properties of ZnS nanoparticles.- Buckling of stiffened carbon nanotube-reinforced composite (CNTRC) plates.- Experimental Investigation of Machining Parameters of Monel 400 in Powder Mixed EDM Process.- Synthesis of Estolides from Coconut, Sunflower and Karanja Oils.- Innovative methods for increasing the tool life of cutting tools in complex surface treatment.- Nano severe Plastic deformation process on Aluminum Alloy and composites an overview.- Review of Mechanized Garbage-Picking Machines: Challenges and Advancements in Sweeping and Handling of Trash.- Study of Leakage Currents in FinFet SRAM Cells.- Advanced Characterization of Estolides from Coconut, Sunflower and Karanja Oils.- Manufacturing of AlSi10Cu2 Foam using Centrifugal Casting Route and LiAlH4 Foaming Agent.- Synthesis and characterization of nano CuO complexed HPMC:PVA polymer blendelectrolytes.- Study on Effect of Pista Shell as Filler material on Mechanical Performance of Banana fiber Reinforced Polymer Composite.