Assoc. Prof. Dr. Sanjay Mavinkere Rangappa is currently working as Senior Research Scientist/Associate Professor and also ‘Advisor within the office of the President for University Promotion and Development towards International goals’ at King Mongkut’s University of Technology North Bangkok, Bangkok, Thailand. He received the B.Engg. (Mechanical Engineering) in the year 2010, M.Tech. (Computational Analysis in Mechanical Sciences) in the year 2013, Ph.D. (Faculty of Mechanical Engineering Science) from Visvesvaraya Technological University, Belagavi, India, in the year 2018, and Postdoctorate from King Mongkut's University of Technology North Bangkok, Thailand, in the year 2019. He is Life Member of Indian Society for Technical Education (ISTE) and Associate Member of Institute of Engineers (India). He is Associate Editor of Heliyon Elsevier (Materials Science) and Frontier Materials Journals and also acts as Board Member of various international journals in the fields of materials science and composites. Prof. Dr.-Ing. habil. Suchart Siengchin is President of King Mongkut’s University of Technology North Bangkok. He has received his Dipl.-Ing. in Mechanical Engineering from University of Applied Sciences Giessen/Friedberg, Hessen, Germany, in 1999, M.Sc. in Polymer Technology from University of Applied Sciences Aalen, Baden-Wuerttemberg, Germany, in 2002, M.Sc. in Material Science at the Erlangen-Nürnberg University, Bayern, Germany, in 2004, Doctor of Philosophy in Engineering (Dr.- Ing.) from Institute for Composite Materials, University of Kaiserslautern, Rheinland-Pfalz, Germany, in 2008, and Postdoctoral Research from Kaiserslautern University and School of Materials Engineering, Purdue University, USA. In 2016, he received the habilitation at the Chemnitz University in Sachen, Germany. He worked as Lecturer for Production and Material Engineering Department at The Sirindhorn International Thai-German Graduate School of Engineering (TGGS), KMUTNB. He has been Full Professor at KMUTNB and became President of KMUTNB.

• Extraction and characterization of natural fiber from Herbaceous residues of Orthosiphon Aristatus.- Morphology, isothermal crystallization kinetics and mechanical properties of polyvinyl alcohol/aloe vera electrospun nanofibers.- Electrospun porous carbon nanofibers from PVDF source.- Thermal insulation for refrigeration pipe made of polyurethane reinforced coconut   husk and rice husk.- Vibro-acoustic behavior of GFRP curved panel under non-uniform thermal environment.- Study the Mechanical characteristics of NaOH& SLS treated Cotton- Kenaf fabric reinforced epoxy composites laminates.- Green synthesis of Silver/Iron (Ag/Fe) and Copper/Iron (Cu/Fe) nanoparticles for cytotoxic investigation on Henrietta Lacks (HeLa) cancer cell.- Effect of manufacturing techniques on mechanical properties of natural fibers reinforced composites for lightweight products - A review.- Characterization of Muntingia calabura fiber as a composite reinforcement with bleaching variation.- Bio-wastecomposite recycling using 3D printing: A review.- Preparation of transparent thin film from cellulose extracted from oil palm empty fruit bunch.- Development and characterization of Glycine max seed powder blended with unidirectional Agave fourcroydes reinforced epoxy nanocomposite.- Mechanical properties and abrasion resistance of 3D printed lightweight CF-reinforced PLA/ABS composites using design of experiments.- Tribological characterization of two different elastic polymers produced via FDM.- Effect of mixing parameters on the friction performance of non-asbestos organic based automotive brake friction composites.

Assoc. Prof. Dr. Sanjay Mavinkere Rangappa is currently working as Senior Research Scientist/Associate Professor and also ‘Advisor within the office of the President for University Promotion and Development towards International goals’ at King Mongkut’s University of Technology North Bangkok, Bangkok, Thailand. He received the B.Engg. (Mechanical Engineering) in the year 2010, M.Tech. (Computational Analysis in Mechanical Sciences) in the year 2013, Ph.D. (Faculty of Mechanical Engineering Science) from Visvesvaraya Technological University, Belagavi, India, in the year 2018, and Postdoctorate from King Mongkut's University of Technology North Bangkok, Thailand, in the year 2019. He is Life Member of Indian Society for Technical Education (ISTE) and Associate Member of Institute of Engineers (India). He is Associate Editor of Heliyon Elsevier (Materials Science) and Frontier Materials Journals and also acts as Board Member of various international journals in the fields of materials science and composites. Prof. Dr.-Ing. habil. Suchart Siengchin is President of King Mongkut’s University of Technology North Bangkok. He has received his Dipl.-Ing. in Mechanical Engineering from University of Applied Sciences Giessen/Friedberg, Hessen, Germany, in 1999, M.Sc. in Polymer Technology from University of Applied Sciences Aalen, Baden-Wuerttemberg, Germany, in 2002, M.Sc. in Material Science at the Erlangen-Nürnberg University, Bayern, Germany, in 2004, Doctor of Philosophy in Engineering (Dr.- Ing.) from Institute for Composite Materials, University of Kaiserslautern, Rheinland-Pfalz, Germany, in 2008, and Postdoctoral Research from Kaiserslautern University and School of Materials Engineering, Purdue University, USA. In 2016, he received the habilitation at the Chemnitz University in Sachen, Germany. He worked as Lecturer for Production and Material Engineering Department at The Sirindhorn International Thai-German Graduate School of Engineering (TGGS), KMUTNB. He has been Full Professor at KMUTNB and became President of KMUTNB.

• Extraction and characterization of natural fiber from Herbaceous residues of Orthosiphon Aristatus.- Morphology, isothermal crystallization kinetics and mechanical properties of polyvinyl alcohol/aloe vera electrospun nanofibers.- Electrospun porous carbon nanofibers from PVDF source.- Thermal insulation for refrigeration pipe made of polyurethane reinforced coconut   husk and rice husk.- Vibro-acoustic behavior of GFRP curved panel under non-uniform thermal environment.- Study the Mechanical characteristics of NaOH& SLS treated Cotton- Kenaf fabric reinforced epoxy composites laminates.- Green synthesis of Silver/Iron (Ag/Fe) and Copper/Iron (Cu/Fe) nanoparticles for cytotoxic investigation on Henrietta Lacks (HeLa) cancer cell.- Effect of manufacturing techniques on mechanical properties of natural fibers reinforced composites for lightweight products - A review.- Characterization of Muntingia calabura fiber as a composite reinforcement with bleaching variation.- Bio-wastecomposite recycling using 3D printing: A review.- Preparation of transparent thin film from cellulose extracted from oil palm empty fruit bunch.- Development and characterization of Glycine max seed powder blended with unidirectional Agave fourcroydes reinforced epoxy nanocomposite.- Mechanical properties and abrasion resistance of 3D printed lightweight CF-reinforced PLA/ABS composites using design of experiments.- Tribological characterization of two different elastic polymers produced via FDM.- Effect of mixing parameters on the friction performance of non-asbestos organic based automotive brake friction composites.

Assoc. Prof. Dr. Sanjay Mavinkere Rangappa is currently working as Senior Research Scientist/Associate Professor and also ‘Advisor within the office of the President for University Promotion and Development towards International goals’ at King Mongkut’s University of Technology North Bangkok, Bangkok, Thailand. He received the B.Engg. (Mechanical Engineering) in the year 2010, M.Tech. (Computational Analysis in Mechanical Sciences) in the year 2013, Ph.D. (Faculty of Mechanical Engineering Science) from Visvesvaraya Technological University, Belagavi, India, in the year 2018, and Postdoctorate from King Mongkut's University of Technology North Bangkok, Thailand, in the year 2019. He is Life Member of Indian Society for Technical Education (ISTE) and Associate Member of Institute of Engineers (India). He is Associate Editor of Heliyon Elsevier (Materials Science) and Frontier Materials Journals and also acts as Board Member of various international journals in the fields of materials science and composites. Prof. Dr.-Ing. habil. Suchart Siengchin is President of King Mongkut’s University of Technology North Bangkok. He has received his Dipl.-Ing. in Mechanical Engineering from University of Applied Sciences Giessen/Friedberg, Hessen, Germany, in 1999, M.Sc. in Polymer Technology from University of Applied Sciences Aalen, Baden-Wuerttemberg, Germany, in 2002, M.Sc. in Material Science at the Erlangen-Nürnberg University, Bayern, Germany, in 2004, Doctor of Philosophy in Engineering (Dr.- Ing.) from Institute for Composite Materials, University of Kaiserslautern, Rheinland-Pfalz, Germany, in 2008, and Postdoctoral Research from Kaiserslautern University and School of Materials Engineering, Purdue University, USA. In 2016, he received the habilitation at the Chemnitz University in Sachen, Germany. He worked as Lecturer for Production and Material Engineering Department at The Sirindhorn International Thai-German Graduate School of Engineering (TGGS), KMUTNB. He has been Full Professor at KMUTNB and became President of KMUTNB.

• Extraction and characterization of natural fiber from Herbaceous residues of Orthosiphon Aristatus.- Morphology, isothermal crystallization kinetics and mechanical properties of polyvinyl alcohol/aloe vera electrospun nanofibers.- Electrospun porous carbon nanofibers from PVDF source.- Thermal insulation for refrigeration pipe made of polyurethane reinforced coconut   husk and rice husk.- Vibro-acoustic behavior of GFRP curved panel under non-uniform thermal environment.- Study the Mechanical characteristics of NaOH& SLS treated Cotton- Kenaf fabric reinforced epoxy composites laminates.- Green synthesis of Silver/Iron (Ag/Fe) and Copper/Iron (Cu/Fe) nanoparticles for cytotoxic investigation on Henrietta Lacks (HeLa) cancer cell.- Effect of manufacturing techniques on mechanical properties of natural fibers reinforced composites for lightweight products - A review.- Characterization of Muntingia calabura fiber as a composite reinforcement with bleaching variation.- Bio-wastecomposite recycling using 3D printing: A review.- Preparation of transparent thin film from cellulose extracted from oil palm empty fruit bunch.- Development and characterization of Glycine max seed powder blended with unidirectional Agave fourcroydes reinforced epoxy nanocomposite.- Mechanical properties and abrasion resistance of 3D printed lightweight CF-reinforced PLA/ABS composites using design of experiments.- Tribological characterization of two different elastic polymers produced via FDM.- Effect of mixing parameters on the friction performance of non-asbestos organic based automotive brake friction composites.