A. G. Evans – författare

These volumes, 5 and 6, of Fracture Mechanics of Ceramics constitute the proceedings of an international symposium on the fracture mechanics of ceramic materials held at The Pennsylvania State University, University Park, PA on July 15, 16, and 17, 1981. These proceedings constitute the third pair of volumes of a con­ tinuing series of conferences. Volumes 1 and 2 were from the 1973 symposium and volumes 3 and 4 from a 1977 symposium, both of which were also held at Penn State. The theme of this conference, as the previous two, focused on the mechanical behavior of ceramic materials in terms of the characteristics of cracks, particularly the roles which they assume in the fracture process. The 78 contributed papers by over 100 authors and co-authors represent the current state of the field. They address many of the theoretical and practical problems of interest to those concerned with brittle fracture. The program chairmen gratefully acknowledge the financial assistance for the Symposium provided by the Army Research Office, the National Science Foundation, and the Office of Naval Research. Without their support, the magnitude and quality of this conference simply would not have been possible.

These volumes, 7 and 8, of Fracture Mechanics of Ceramics constitute the proceedings of an international symposium on the fracture mechanics of ceramic materials held at Virginia Polytechnic Institute and State University, Blacksburg, Virginia on June 19, 20 and 21, 1985. These proceedings constitute the fourth pair of volumes of a continuing series of conferences. The theme of this conference, as the previous three, focused on the mechanical behavior of ceramic materials in terms of the characteristics of cracks, particularly the roles which they assume in the fracture process. The 78 contributed papers by over 100 authors and co-authors represent the current state of the field. They address many of the theoretical and practical problems of interest to those concerned with brittle fracture. The program chairmen gratefully acknowledge the financial assistance for the Symposium provided by the EXXON Foundation, the Army Research Office, the Natio~al Science Foundation, and the Office of Naval Research. Without their support, this conference simply would not have been possible. The suggestions of Drs. J. C. Hurt, R. C. Pohanka, and L. Toth were particularly helpful in assuring the success of this symposium. Special appreciation is extended to Professor J. I. Robertson, C. P. Miles Professor of History. whose presentation following the banquet on the American Civil War was very well received by the audience. Finally, we wish to also thank our joint secretaries, especially Karen Snider, for their patience and help in finally bringing these proceedings to press.

These volumes, 7 and 8, of Fracture Mechanics of Ceramics constitute the proceedings of an international symposium on the fracture mechanics of ceramic materials held at Virginia Polytechnic Institute and State University, Blacksburg, Virginia on June 19, 20 and 21, 1985. These proceedings constitute the fourth pair of volumes of a continuing series of conferences. The theme of this conference, as the previous three, focused on the mechanical behavior of ceramic materials in terms of the characteristics of cracks, particularly the roles which they assume in the fracture process. The 78 contributed papers by over 100 authors and co-authors represent the current state of the field. They address many of the theoretical and practical problems of interest to those concerned with brittle fracture. The program chairmen gratefully acknowledge the financial assistance for the Symposium provided by the EXXON Foundation, the Army Research Office, the Natio~al Science Foundation, and the Office of Naval Research. Without their support, this conference simply would not have been possible. The suggestions of Drs. J. C. Hurt, R. C. Pohanka, and L. Toth were particularly helpful in assuring the success of this symposium. Special appreciation is extended to Professor J. I. Robertson, C. P. Miles Professor of History. whose presentation following the banquet on the American Civil War was very well received by the audience. Finally, we wish to also thank our joint secretaries, especially Karen Snider, for their patience and help in finally bringing these proceedings to press.

These volumes, 7 and 8, of Fracture Mechanics of Ceramics constitute the proceedings of an international symposium on the fracture mechanics of ceramic materials held at Virginia Polytechnic Institute and State University, Blacksburg, Virginia on June 19, 20 and 21, 1985. These proceedings constitute the fourth pair of volumes of a continuing series of conferences. The theme of this conference, as the previous three, focused on the mechanical behavior of ceramic materials in terms of the characteristics of cracks, particularly the roles which they assume in the fracture process. The 78 contributed papers by over 100 authors and co-authors represent the current state of the field. They address many of the theoretical and practical problems of interest to those concerned with brittle fracture. The program chairmen gratefully acknowledge the financial assistance for the Symposium provided by the EXXON Foundation, the Army Research Office, the National Science Foundation, and the Office of Naval Research. Without their support, this conference simply would not have been possible. The suggestions of Drs. J. C. Hurt, R. C. Pohanka, and L. Toth were particularly helpful in assuring the" success of this symposium. Special appreciation is extended to Professor J. I. Robertson, C. P. Miles Professor of History, whose presentation following the banquet on the American Civil War was very well received by the audience. Finally, we wish to also thank our joint secretaries, especially Karen Snider, for their patience and help in finally bringing these proceedings to press.

These volumes, 7 and 8, of Fracture Mechanics of Ceramics constitute the proceedings of an international symposium on the fracture mechanics of ceramic materials held at Virginia Polytechnic Institute and State University, Blacksburg, Virginia on June 19, 20 and 21, 1985. These proceedings constitute the fourth pair of volumes of a continuing series of conferences. The theme of this conference, as the previous three, focused on the mechanical behavior of ceramic materials in terms of the characteristics of cracks, particularly the roles which they assume in the fracture process. The 78 contributed papers by over 100 authors and co-authors represent the current state of the field. They address many of the theoretical and practical problems of interest to those concerned with brittle fracture. The program chairmen gratefully acknowledge the financial assistance for the Symposium provided by the EXXON Foundation, the Army Research Office, the National Science Foundation, and the Office of Naval Research. Without their support, this conference simply would not have been possible. The suggestions of Drs. J. C. Hurt, R. C. Pohanka, and L. Toth were particularly helpful in assuring the" success of this symposium. Special appreciation is extended to Professor J. I. Robertson, C. P. Miles Professor of History, whose presentation following the banquet on the American Civil War was very well received by the audience. Finally, we wish to also thank our joint secretaries, especially Karen Snider, for their patience and help in finally bringing these proceedings to press.

Metal Resources and Energy was initially aimed at exploring the future availability of metals and the energy required to produce them. During the detailed planning of the book, the authors decided to extend the remit to consider fuel use in relation to resources and future availability. In order to explore this relationship a framework was established which provided an agenda of topics to examine. In the process of systematically working through this agenda a deeper understanding of resource issues and some new insights were obtained. This book develops a framework for assessing the future availability of metals by first reviewing the activities associated with the production of metals. These can be divided into four broad categories: exploration and establishment, mining, concentrating, and smelting and refining. It then examines factors such as energy economics, forecasting issues, resources and reserves estimation, and trends in technical efficiency. Subsequent chapters deal with the evaluation of fuel use in metals production; the secondary production of metals from scrap and other waste materials; non-technical issues that are potential sources of short-term crises; and other applications of energy data. This book is intended for final year students of engineering, geology, and economics, all of whom will find all the topics covered relevant to their studies. It attempts to convey the essentials of resource economics, metal production technology, energy analysis, and those aspects of geology and geochemistry which are pertinent to a study of resource issues. The full breadth of topics is covered at a depth which is comprehensible to students from other disciplines.