This book provides a hands-on experience in software and hardware engineering of IoT devices in edge and cloud computing systems, by putting in practice state-of-the-art concepts of hardware devices, networking and computing software. It proposes a Network of Things Engineering (NoTE) Lab, with seven hands-on lab modules covering topics ranging from “Interfacing sensors and actuators” and “Connecting IoT and Edge with MQTT" to “Data pipelining in cloud computing”. All tools and software used in the NoTE Lab are free and open source, and available to the readers. Specifically, Arduino-based boards that support a variety of low-cost sensors and actuators are used in IoT context. In edge computing, NoTE Lab implements off-the-shelf single board computers, Raspberry Pis with corresponding software and hardware. For cloud, well-known and widely used cloud computing open-source tools (e.g., Kubernetes) are deployed, where readers can learn the basics of monitoring and managing containersin cloud computing. Three communication protocols are used in the end-to-end setup, including MQTT, AMQP and HTTP. This lab book is a "must experiment with" for anybody in academia and industry participating in the fascinating IoT-edge-cloud continuum development. 

The two-volume set LNCS 15385 + 15386 constitutes the proceedings of the workshops and associated events that were held in conjunction with the 30th European Conference on Parallel and Distributed Processing, Euro-Par 2024, which took place in Madrid, Spain, during August 26–30, 2024.

Overall, the Euro-Par Workshops received a total of 84 submissions of which 60 were accepted for presentation. They stem from the following workshops: 

– The 1st European Workshop on Quantum Computing for High-Performance Computing (EUROQHPC 2024)– The 19th Workshop on Virtualization in High-Performance Cloud Computing (VHPC 2024)– The 1st Workshop in High-Performance Computing in Physics (PHYSHPC 2024)– The 4th Workshop on Asynchronous Many-Task Systems for Exascale (AMTE 2024)– The 3rd EuroHPC Workshop on Dynamic Resources in HPC (DYNRESHPC 2024)– The 22nd International Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms (HETEROPAR 2024)– The 1st Workshop on Next Steps in IoT-Edge-Cloud Continuum Evolution: Research and Practice (IECCONT 2024)– The 1st Workshop about High-Performance e-Science (HIPES 2024)– The 2nd International Workshop on Scalable Compute Continuum (WSCC 2024)

In addition, the proceedings contain 14 poster and demo papers that have been accepted from 30 submissions, and 18 contributions in the PhD Symposium track that were accepted from 22 submissions. 

The two-volume set LNCS 15385 + 15386 constitutes the proceedings of the workshops and associated events that were held in conjunction with the 30th European Conference on Parallel and Distributed Processing, Euro-Par 2024, which took place in Madrid, Spain, during August 26–30, 2024.

Overall, the Euro-Par Workshops received a total of 84 submissions of which 60 were accepted for presentation. They stem from the following workshops: 

– The 1st European Workshop on Quantum Computing for High-Performance Computing (EUROQHPC 2024)– The 19th Workshop on Virtualization in High-Performance Cloud Computing (VHPC 2024)– The 1st Workshop in High-Performance Computing in Physics (PHYSHPC 2024)– The 4th Workshop on Asynchronous Many-Task Systems for Exascale (AMTE 2024)– The 3rd EuroHPC Workshop on Dynamic Resources in HPC (DYNRESHPC 2024)– The 22nd International Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms (HETEROPAR 2024)– The 1st Workshop on Next Steps in IoT-Edge-Cloud Continuum Evolution: Research and Practice (IECCONT 2024)– The 1st Workshop about High-Performance e-Science (HIPES 2024)– The 2nd International Workshop on Scalable Compute Continuum (WSCC 2024)

In addition, the proceedings contain 14 poster and demo papers that have been accepted from 30 submissions, and 18 contributions in the PhD Symposium track that were accepted from 22 submissions. 

This book provides a hands-on experience in software and hardware engineering of IoT devices in edge and cloud computing systems, by putting in practice state-of-the-art concepts of hardware devices, networking and computing software. It proposes a Network of Things Engineering (NoTE) Lab, with seven hands-on lab modules covering topics ranging from “Interfacing sensors and actuators” and “Connecting IoT and Edge with MQTT" to “Data pipelining in cloud computing”. All tools and software used in the NoTE Lab are free and open source, and available to the readers. Specifically, Arduino-based boards that support a variety of low-cost sensors and actuators are used in IoT context. In edge computing, NoTE Lab implements off-the-shelf single board computers, Raspberry Pis with corresponding software and hardware. For cloud, well-known and widely used cloud computing open-source tools (e.g., Kubernetes) are deployed, where readers can learn the basics of monitoring and managing containersin cloud computing. Three communication protocols are used in the end-to-end setup, including MQTT, AMQP and HTTP. This lab book is a "must experiment with" for anybody in academia and industry participating in the fascinating IoT-edge-cloud continuum development. 

The two-volume set LNCS 15385 + 15386 constitutes the proceedings of the workshops and associated events that were held in conjunction with the 30th European Conference on Parallel and Distributed Processing, Euro-Par 2024, which took place in Madrid, Spain, during August 26–30, 2024.

Overall, the Euro-Par Workshops received a total of 84 submissions of which 60 were accepted for presentation. They stem from the following workshops: 

– The 1st European Workshop on Quantum Computing for High-Performance Computing (EUROQHPC 2024)– The 19th Workshop on Virtualization in High-Performance Cloud Computing (VHPC 2024)– The 1st Workshop in High-Performance Computing in Physics (PHYSHPC 2024)– The 4th Workshop on Asynchronous Many-Task Systems for Exascale (AMTE 2024)– The 3rd EuroHPC Workshop on Dynamic Resources in HPC (DYNRESHPC 2024)– The 22nd International Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms (HETEROPAR 2024)– The 1st Workshop on Next Steps in IoT-Edge-Cloud Continuum Evolution: Research and Practice (IECCONT 2024)– The 1st Workshop about High-Performance e-Science (HIPES 2024)– The 2nd International Workshop on Scalable Compute Continuum (WSCC 2024)

In addition, the proceedings contain 14 poster and demo papers that have been accepted from 30 submissions, and 18 contributions in the PhD Symposium track that were accepted from 22 submissions. 

The two-volume set LNCS 15385 + 15386 constitutes the proceedings of the workshops and associated events that were held in conjunction with the 30th European Conference on Parallel and Distributed Processing, Euro-Par 2024, which took place in Madrid, Spain, during August 26–30, 2024.

Overall, the Euro-Par Workshops received a total of 84 submissions of which 60 were accepted for presentation. They stem from the following workshops: 

– The 1st European Workshop on Quantum Computing for High-Performance Computing (EUROQHPC 2024)– The 19th Workshop on Virtualization in High-Performance Cloud Computing (VHPC 2024)– The 1st Workshop in High-Performance Computing in Physics (PHYSHPC 2024)– The 4th Workshop on Asynchronous Many-Task Systems for Exascale (AMTE 2024)– The 3rd EuroHPC Workshop on Dynamic Resources in HPC (DYNRESHPC 2024)– The 22nd International Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms (HETEROPAR 2024)– The 1st Workshop on Next Steps in IoT-Edge-Cloud Continuum Evolution: Research and Practice (IECCONT 2024)– The 1st Workshop about High-Performance e-Science (HIPES 2024)– The 2nd International Workshop on Scalable Compute Continuum (WSCC 2024)

In addition, the proceedings contain 14 poster and demo papers that have been accepted from 30 submissions, and 18 contributions in the PhD Symposium track that were accepted from 22 submissions.