Alex Goldman - Böcker

For the past seventy years, ferrites (magnetic ceramics) have been prized for a range of properties that has no equivalent in the existing metal magnetic materials. They have contributed to many important advances in electronics and new high-performance products are appearing all the time. Ferrite technology has produced greater progress in the past 15 years since the first edition was published. Many of the semiconductor and IC technology responsible for the computer and Internet explosion would not have been possible without the magnetic materials technology needed for powering and otherwise exploiting those developments.Modern Ferrite Technology, 2nd ed, offers the readers an expert overview of the latest ferrite advances as well as their applications in electronic components. This volume develops the interplay among material properties, component specification and device requirements using ferrites. Throughout, emphasis is placed on practical technological concerns as opposed to mathematical and physical aspects of the subject. The book traces the origin of the magnetic effect in ferrites from the level of the simplest particle and the increases the scope to the larger and larger hierarchies. From the desired magnetic properties the author deduces the physical and chemical material parameters, taking into consideration major chemistry, impurity levels, ceramic microstructures and grain boundary effects. He then discusses the processing conditions and associated conditions required for implementation. In addition to conventional ceramic techniques, he describes non-conventional methods such as coprecipitation, co-spray roasting and single crystal growth.The second section of this book deals with a complete listing of the many important applications in the field including ferrites for permanent magnet, telecommunications, power supplies, memory systems magnetic recording and microwave applications.The function of ferrites ineach of these applications is described. The requirements of the electronic circuit and device are broken down into the individual component specifications with regard to size and configuration. Design criteria for power level, degree of stability and cost are then considered.

The Handbook of Modern Ferromagnetic Materials is an up-to-the-minute compendium of all ferromagnetic materials, metallic and ceramic, intended for electrical and electronic applications. Coverage of the newest and most economically important materials (soft ferrites, the rare-earth magnet alloys, amorphous and nanocrystalline alloys) is extensive. The distinctive feature of this book is its correlation of basic material properties (metallurgical and ceramic) with their magnetic characteristics and eventually to the choice in an application. Unique to this work is information on the many magnetic components into which these materials can be formed and the pertinent design data. Another useful feature is the criteria (quality, stability and economic) for selection of a particular material. Included are the mechanical, thermal and physical properties of these materials. The author not only presents the latest information from suppliers and magnetism conferences but includes a section on new materials (e.g. colossal magnetostriction materials) being developed but not yet available.The format is arranged according to frequency of operation, which turns out to be almost concurrent with the application. Thus, direct current applications are considered first, then low frequency line power, followed by applications at increasing frequencies up to microwave uses. This anthology of ferromagnetic materials is an essential reference work for electrical and electronic designers and materials scientists. It may also serve as a text for a magnetic materials course and as a materials guide for purchasing agents and technical executives.

Magnetic Components for Power Electronics concerns the important considerations necessary in the choice of the optimum magnetic component for power electronic applications. These include the topology of the converter circuit, the core material, shape, size and others such as cost and potential component suppliers. These are all important for the design engineer due to the emergence of new materials, changes in supplier management and the examples of several component choices. Suppliers using this volume will also understand the needs of designers. Highlights include: 1. Emphasis on recently introduced new ferrite materials, such as those operating at megahertz frequencies and under higher DC drive conditions; 2. Discussion of amorphous and nanocrystalline metal materials; 3. New technologies such as resonance converters, power factors correction (PFC) and soft switching; 4. Catalog information from over 40 magnetic component suppliers; 5. Examples of methods of component choice for ferrites, amorphous nanocrystalline materials; 6. Information on suppliers management changes such as those occurring at Siemens, Philips, Thomson and Allied-Signal; 7.Attention to the increasingly important concerns about EMI. This book should be especially helpful for power electronic circuit designers, technical executives, and material science engineers involved with power electronic components.

For the past seventy years, ferrites (magnetic ceramics) have been prized for a range of properties that has no equivalent in the existing metal magnetic materials. They have contributed to many important advances in electronics and new high-performance products are appearing all the time. Ferrite technology has produced greater progress in the past 15 years since the first edition was published. Many of the semiconductor and IC technology responsible for the computer and Internet explosion would not have been possible without the magnetic materials technology needed for powering and otherwise exploiting those developments.Modern Ferrite Technology, 2nd ed, offers the readers an expert overview of the latest ferrite advances as well as their applications in electronic components. This volume develops the interplay among material properties, component specification and device requirements using ferrites. Throughout, emphasis is placed on practical technological concerns as opposed to mathematical and physical aspects of the subject. The book traces the origin of the magnetic effect in ferrites from the level of the simplest particle and the increases the scope to the larger and larger hierarchies. From the desired magnetic properties the author deduces the physical and chemical material parameters, taking into consideration major chemistry, impurity levels, ceramic microstructures and grain boundary effects. He then discusses the processing conditions and associated conditions required for implementation. In addition to conventional ceramic techniques, he describes non-conventional methods such as coprecipitation, co-spray roasting and single crystal growth.The second section of this book deals with a complete listing of the many important applications in the field including ferrites for permanent magnet, telecommunications, power supplies, memory systems magnetic recording and microwave applications.The function of ferrites ineach of these applications is described. The requirements of the electronic circuit and device are broken down into the individual component specifications with regard to size and configuration. Design criteria for power level, degree of stability and cost are then considered.

Magnetic Components for Power Electronics concerns the important considerations necessary in the choice of the optimum magnetic component for power electronic applications. These include the topology of the converter circuit, the core material, shape, size and others such as cost and potential component suppliers. These are all important for the design engineer due to the emergence of new materials, changes in supplier management and the examples of several component choices. Suppliers using this volume will also understand the needs of designers.Highlights include: Emphasis on recently introduced new ferrite materials, such as those operating at megahertz frequencies and under higher DC drive conditions; Discussion of amorphous and nanocrystalline metal materials; New technologies such as resonance converters, power factors correction (PFC) and soft switching; Catalog information from over 40 magnetic component suppliers; Examples of methods of component choice for ferrites, amorphous nanocrystalline materials; Information on suppliers management changes such as those occurring at Siemens, Philips, Thomson and Allied-Signal; Attention to the increasingly important concerns about EMI. This book should be especially helpful for power electronic circuit designers, technical executives, and material science engineers involved with power electronic components.