Designer Surfaces presents an approach to the design and fabrication of optical elements that are based on the use of one- or two-dimensional randomly rough surfaces to reflect or transmit light in specified ways. The reader is provided with an introduction to analytical methods for the solution of direct problems in rough surface scattering, and fabrication techniques. These can be useful in contexts outside the scope of this book. The advantages and disadvantages of this stochastic approach compared to the diffractive optics approach are discussed. Finally, experimental results that verify the predictions of the theories developed in this book are presented.- Authority of authors- The only book on the topic- Derivations are given in detail, with many figures illustrating results

All real surfaces, both those occurring naturally, and those fabricated artificially and with great care, are rough to some degree. It is therefore of interest, and often of importance, to know the extent to which this roughness affects physical p- cesses occurring at a surface. A particularly interesting class of physical processes occurring at a rough surface is the scattering of electromagnetic waves from it, or their transmission through it. In this case the degree of the surface roughness is referred to the wavelength of the waves incident on it. The study of the scattering of electromagnetic waves from rough surfaces has been actively carried out for more than a century now, since Rayleigh's inves- gations of the scattering of a monochromatic plane wave incident normally on a 1 sinusoidal interface between two different media. The first theoretical treatment of the scattering of an electromagnetic wave from a randomly rough surface was due to Mandel'shtam/ in the context of the scattering of light from a liquid s- face. In these pioneering studies the angular dependence of the intensity of the scattered field was calculated by perturbation theory as an expansion in powers of the surface profile function though the first nonzero term, a single scattering approximation.

All real surfaces, both those occurring naturally, and those fabricated artificially and with great care, are rough to some degree. It is therefore of interest, and often of importance, to know the extent to which this roughness affects physical p- cesses occurring at a surface. A particularly interesting class of physical processes occurring at a rough surface is the scattering of electromagnetic waves from it, or their transmission through it. In this case the degree of the surface roughness is referred to the wavelength of the waves incident on it. The study of the scattering of electromagnetic waves from rough surfaces has been actively carried out for more than a century now, since Rayleigh''s inves- gations of the scattering of a monochromatic plane wave incident normally on a 1 sinusoidal interface between two different media. The first theoretical treatment of the scattering of an electromagnetic wave from a randomly rough surface was due to Mandel''shtam/ in the context of the scattering of light from a liquid s- face. In these pioneering studies the angular dependence of the intensity of the scattered field was calculated by perturbation theory as an expansion in powers of the surface profile function though the first nonzero term, a single scattering approximation.

Designer Surfaces presents an approach to the design and fabrication of optical elements that are based on the use of one- or two-dimensional randomly rough surfaces to reflect or transmit light in specified ways. The reader is provided with an introduction to analytical methods for the solution of direct problems in rough surface scattering, and fabrication techniques. These can be useful in contexts outside the scope of this book. The advantages and disadvantages of this stochastic approach compared to the diffractive optics approach are discussed. Finally, experimental results that verify the predictions of the theories developed in this book are presented. Authority of authors The only book on the topic Derivations are given in detail, with many figures illustrating results

Plasmonics is entering the curriculum of many universities, either as a stand alone subject, or as part of some course or courses. Nanotechnology institutes have been, and are being, established in universities, in which plasmonics is a significant topic of research. Modern Plasmonics offers a comprehensive presentation of the properties of surface plasmon polaritons, in systems of different structures and various natures, e.g. active, nonlinear, graded, theoretical/computational and experimental techniques for studying them, and their use in a variety of applications.- Contains material not found in existing books on plasmonics, including basic properties of these surface waves, theoretical/computational and experimental approaches, and new applications of them- Each chapter is written by an expert in the subject to which it is devoted- Emphasis on applications of plasmonics that have been realized, not just predicted or proposed

Plasmonics is entering the curriculum of many universities, either as a stand alone subject, or as part of some course or courses. Nanotechnology institutes have been, and are being, established in universities, in which plasmonics is a significant topic of research. Modern Plasmonics offers a comprehensive presentation of the properties of surface plasmon polaritons, in systems of different structures and various natures, e.g. active, nonlinear, graded, theoretical/computational and experimental techniques for studying them, and their use in a variety of applications.

Contains material not found in existing books on plasmonics, including basic properties of these surface waves, theoretical/computational and experimental approaches, and new applications of them Each chapter is written by an expert in the subject to which it is devoted Emphasis on applications of plasmonics that have been realized, not just predicted or proposed

Optical metamaterials are an exciting new field in optical science. A rapidly developing class of these metamaterials are those that allow the manipulation of volume and surface electromagnetic waves in desirable ways by suitably structuring the surfaces they interact with. They have applications in a variety of fields, such as materials science, photovoltaic technology, imaging and lensing, beam shaping and lasing. Describing techniques and applications, this book is ideal for researchers and professionals working in metamaterials and plasmonics, as well as those just entering this exciting new field. It surveys different types of structured surfaces, their design and fabrication, their unusual optical properties, recent experimental observations and their applications. Each chapter is written by an expert in that area, giving the reader an up-to-date overview of the subject. Both the experimental and theoretical aspects of each topic are presented.

All real surfaces, both those occurring naturally, and those fabricated artificially and with great care, are rough to some degree. It is therefore of interest, and often of importance, to know the extent to which this roughness affects physical p- cesses occurring at a surface. A particularly interesting class of physical processes occurring at a rough surface is the scattering of electromagnetic waves from it, or their transmission through it. In this case the degree of the surface roughness is referred to the wavelength of the waves incident on it. The study of the scattering of electromagnetic waves from rough surfaces has been actively carried out for more than a century now, since Rayleigh's inves- gations of the scattering of a monochromatic plane wave incident normally on a 1 sinusoidal interface between two different media. The first theoretical treatment of the scattering of an electromagnetic wave from a randomly rough surface was due to Mandel'shtam/ in the context of the scattering of light from a liquid s- face. In these pioneering studies the angular dependence of the intensity of the scattered field was calculated by perturbation theory as an expansion in powers of the surface profile function though the first nonzero term, a single scattering approximation.

Designer Surfaces presents an approach to the design and fabrication of optical elements that are based on the use of one- or two-dimensional randomly rough surfaces to reflect or transmit light in specified ways. The reader is provided with an introduction to analytical methods for the solution of direct problems in rough surface scattering, and fabrication techniques. These can be useful in contexts outside the scope of this book. The advantages and disadvantages of this stochastic approach compared to the diffractive optics approach are discussed. Finally, experimental results that verify the predictions of the theories developed in this book are presented.- Authority of authors- The only book on the topic- Derivations are given in detail, with many figures illustrating results

All real surfaces, both those occurring naturally, and those fabricated artificially and with great care, are rough to some degree. It is therefore of interest, and often of importance, to know the extent to which this roughness affects physical p- cesses occurring at a surface. A particularly interesting class of physical processes occurring at a rough surface is the scattering of electromagnetic waves from it, or their transmission through it. In this case the degree of the surface roughness is referred to the wavelength of the waves incident on it. The study of the scattering of electromagnetic waves from rough surfaces has been actively carried out for more than a century now, since Rayleigh's inves- gations of the scattering of a monochromatic plane wave incident normally on a 1 sinusoidal interface between two different media. The first theoretical treatment of the scattering of an electromagnetic wave from a randomly rough surface was due to Mandel'shtam/ in the context of the scattering of light from a liquid s- face. In these pioneering studies the angular dependence of the intensity of the scattered field was calculated by perturbation theory as an expansion in powers of the surface profile function though the first nonzero term, a single scattering approximation.

All real surfaces, both those occurring naturally, and those fabricated artificially and with great care, are rough to some degree. It is therefore of interest, and often of importance, to know the extent to which this roughness affects physical p- cesses occurring at a surface. A particularly interesting class of physical processes occurring at a rough surface is the scattering of electromagnetic waves from it, or their transmission through it. In this case the degree of the surface roughness is referred to the wavelength of the waves incident on it. The study of the scattering of electromagnetic waves from rough surfaces has been actively carried out for more than a century now, since Rayleigh''s inves- gations of the scattering of a monochromatic plane wave incident normally on a 1 sinusoidal interface between two different media. The first theoretical treatment of the scattering of an electromagnetic wave from a randomly rough surface was due to Mandel''shtam/ in the context of the scattering of light from a liquid s- face. In these pioneering studies the angular dependence of the intensity of the scattered field was calculated by perturbation theory as an expansion in powers of the surface profile function though the first nonzero term, a single scattering approximation.

Designer Surfaces presents an approach to the design and fabrication of optical elements that are based on the use of one- or two-dimensional randomly rough surfaces to reflect or transmit light in specified ways. The reader is provided with an introduction to analytical methods for the solution of direct problems in rough surface scattering, and fabrication techniques. These can be useful in contexts outside the scope of this book. The advantages and disadvantages of this stochastic approach compared to the diffractive optics approach are discussed. Finally, experimental results that verify the predictions of the theories developed in this book are presented. Authority of authors The only book on the topic Derivations are given in detail, with many figures illustrating results

Plasmonics is entering the curriculum of many universities, either as a stand alone subject, or as part of some course or courses. Nanotechnology institutes have been, and are being, established in universities, in which plasmonics is a significant topic of research. Modern Plasmonics offers a comprehensive presentation of the properties of surface plasmon polaritons, in systems of different structures and various natures, e.g. active, nonlinear, graded, theoretical/computational and experimental techniques for studying them, and their use in a variety of applications.- Contains material not found in existing books on plasmonics, including basic properties of these surface waves, theoretical/computational and experimental approaches, and new applications of them- Each chapter is written by an expert in the subject to which it is devoted- Emphasis on applications of plasmonics that have been realized, not just predicted or proposed

Plasmonics is entering the curriculum of many universities, either as a stand alone subject, or as part of some course or courses. Nanotechnology institutes have been, and are being, established in universities, in which plasmonics is a significant topic of research. Modern Plasmonics offers a comprehensive presentation of the properties of surface plasmon polaritons, in systems of different structures and various natures, e.g. active, nonlinear, graded, theoretical/computational and experimental techniques for studying them, and their use in a variety of applications.

Contains material not found in existing books on plasmonics, including basic properties of these surface waves, theoretical/computational and experimental approaches, and new applications of them Each chapter is written by an expert in the subject to which it is devoted Emphasis on applications of plasmonics that have been realized, not just predicted or proposed

Optical metamaterials are an exciting new field in optical science. A rapidly developing class of these metamaterials are those that allow the manipulation of volume and surface electromagnetic waves in desirable ways by suitably structuring the surfaces they interact with. They have applications in a variety of fields, such as materials science, photovoltaic technology, imaging and lensing, beam shaping and lasing. Describing techniques and applications, this book is ideal for researchers and professionals working in metamaterials and plasmonics, as well as those just entering this exciting new field. It surveys different types of structured surfaces, their design and fabrication, their unusual optical properties, recent experimental observations and their applications. Each chapter is written by an expert in that area, giving the reader an up-to-date overview of the subject. Both the experimental and theoretical aspects of each topic are presented.

All real surfaces, both those occurring naturally, and those fabricated artificially and with great care, are rough to some degree. It is therefore of interest, and often of importance, to know the extent to which this roughness affects physical p- cesses occurring at a surface. A particularly interesting class of physical processes occurring at a rough surface is the scattering of electromagnetic waves from it, or their transmission through it. In this case the degree of the surface roughness is referred to the wavelength of the waves incident on it. The study of the scattering of electromagnetic waves from rough surfaces has been actively carried out for more than a century now, since Rayleigh's inves- gations of the scattering of a monochromatic plane wave incident normally on a 1 sinusoidal interface between two different media. The first theoretical treatment of the scattering of an electromagnetic wave from a randomly rough surface was due to Mandel'shtam/ in the context of the scattering of light from a liquid s- face. In these pioneering studies the angular dependence of the intensity of the scattered field was calculated by perturbation theory as an expansion in powers of the surface profile function though the first nonzero term, a single scattering approximation.