Ankit Sharma - Böcker

Advances in 3D and 4D Printing of Medical Robots and Devices presents the most recent innovative breakthroughs in smart manufacturing and biomedical engineering to help enhance knowledge and expertise in 3D/4D printing technologies and advancements in biomedical applications through robotics and medical devices. This book highlights the usage and importance of 3D/4D printing-based prototyping as well as the manufacturing of robotic elements such as energy generators, morphology control, and novel design strategies. This book will help readers to pursue contemporary insights into currently ongoing practices in biomedical and mechatronic engineering including the fabrication of actuators manufacturing; muscles, vibration dampers, bio-inspired structures, pre-surgical and post-surgical tooling, medical assistance robots, drug delivery, microfluidic, and wearable electronics. Academic scholars, manufacturing scientists, and commercial manufacturers of bio-devices and medical robotics will find this book to be useful in adopting competent biomaterials as well as innovative techniques for applications in biomedical engineering.Covers all the topics pertaining to 3D & 4D printing & robotics both fundamentals and advancementsProvides scientific and technological insights on additive manufacturing routesCovers a wide range of biomedical devices; such as actuators manufacturing; muscles; vibration dampers; bio-inspired structures; pre-surgical and post-surgical tooling implants; scaffolds; organs

This book covers innovative breakthroughs in additive manufacturing processes used for biomedical engineering. More and more, 3D printing is selected over traditional manufacturing processes, especially for complex designs, because of the many advantages such as fewer restrictions, better production cost savings, higher quality control, and accuracy.Current challenges and opportunities regarding material, design, cost savings, and efficiency are covered along with an outline of the most recent fabrication methods used for converting biomaterials into integrated structures that can fit best in anatomy while still obtaining the necessary architecture, mechanical reliability, biocompatibility, and anti-bacterial characteristics needed. Additional chapters will also focus on selected areas of applications such as bionics, affordable prostheses, implants, medical devices, rapid tooling, and drug delivery.Additive Manufacturing Processes in Biomedical Engineering: Advanced Fabrication Methods and Rapid Tooling Techniques acts as a first-hand reference for commercial manufacturing organizations which are mimicking tissue organs by using additive manufacturing techniques. By capturing the current trends of today’s manufacturing practices this book becomes a one-stop resource for manufacturing professionals, engineers in related disciplines, and academic researchers.

This book covers innovative breakthroughs in additive manufacturing processes used for biomedical engineering. More and more, 3D printing is selected over traditional manufacturing processes, especially for complex designs, because of the many advantages such as fewer restrictions, better production cost savings, higher quality control, and accuracy.Current challenges and opportunities regarding material, design, cost savings, and efficiency are covered along with an outline of the most recent fabrication methods used for converting biomaterials into integrated structures that can fit best in anatomy while still obtaining the necessary architecture, mechanical reliability, biocompatibility, and anti-bacterial characteristics needed. Additional chapters will also focus on selected areas of applications such as bionics, affordable prostheses, implants, medical devices, rapid tooling, and drug delivery.Additive Manufacturing Processes in Biomedical Engineering: Advanced Fabrication Methods and Rapid Tooling Techniques acts as a first-hand reference for commercial manufacturing organizations which are mimicking tissue organs by using additive manufacturing techniques. By capturing the current trends of today’s manufacturing practices this book becomes a one-stop resource for manufacturing professionals, engineers in related disciplines, and academic researchers.

Application of additive manufacturing and tissue engineering in the fields of science and technology enables the manufacturing of biocompatible, customized, reliable, and cost-effective parts, restoring the functionality of a failed human body part. This book offers a platform for recent breakthroughs in additive manufacturing related to biomedical applications.This book highlights some of the top innovations and advances in additive manufacturing and processing technologies that are the future of the manufacturing industry while also presenting current challenges and opportunities regarding the choice of material. This book includes areas of applications such as surgical guides, tissue regeneration, artificial scaffolds, implants, and drug delivery and release. Throughout the book, an emphasis is placed on rapid tooling for engineering applications.Additive Manufacturing of Polymers for Tissue Engineering: Fundamentals, Applications, and Future Advancements acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing and development plans.

Application of additive manufacturing and tissue engineering in the fields of science and technology enables the manufacturing of biocompatible, customized, reliable, and cost-effective parts, restoring the functionality of a failed human body part. This book offers a platform for recent breakthroughs in additive manufacturing related to biomedical applications.This book highlights some of the top innovations and advances in additive manufacturing and processing technologies that are the future of the manufacturing industry while also presenting current challenges and opportunities regarding the choice of material. This book includes areas of applications such as surgical guides, tissue regeneration, artificial scaffolds, implants, and drug delivery and release. Throughout the book, an emphasis is placed on rapid tooling for engineering applications.Additive Manufacturing of Polymers for Tissue Engineering: Fundamentals, Applications, and Future Advancements acts as a first-hand source of information for academic scholars and commercial manufacturers as they make strategic manufacturing and development plans.

This book captures the recent breakthroughs in subtractive manufacturing and difficult-to-machine, material-based, modern machining techniques. It illustrates various combinations of hybrid machining and super finishing, and outlines the critical area profile accuracy, high-precision machining, high tolerance, surface quality, chipping, and cracking for converting into new applications.Modern Hybrid Machining and Super Finishing Processes: Technology and Applications provides scientific and technological insights on subtractive manufacturing routes. It covers a wide range of micromachining parts, electronic components, metrological devices, and biomedical instruments on materials such as titanium, stainless steel, high-strength temperature-resistant alloys, fiber-reinforced composites, and ceramics, refractories, and other difficult-to-machine alloys. The book emphasizes machined surface accuracy and quality of surface, productivity, and automatization. It also covers creating complex, intricate, and complicated shapes for difficult-to-machine materials. The book goes on to offer an investigation on electrochemical discharge machining, abrasive-based nano-finishing, and rotary ultrasonic machining-based parametric combination, as well as discuss the latest trends in hybrid machining combined processes.This book is a firsthand reference for commercial organizations mimicking modern hybrid machining processes by targeting difficult-to-machine, materials-based applications. By capturing the current trends of today’s manufacturing practices, this book becomes a one-stop resource for scholars, manufacturing professionals, engineers, and academic researchers.

This book captures the recent breakthroughs in subtractive manufacturing and difficult-to-machine, material-based, modern machining techniques. It illustrates various combinations of hybrid machining and super finishing, and outlines the critical area profile accuracy, high-precision machining, high tolerance, surface quality, chipping, and cracking for converting into new applications.Modern Hybrid Machining and Super Finishing Processes: Technology and Applications provides scientific and technological insights on subtractive manufacturing routes. It covers a wide range of micromachining parts, electronic components, metrological devices, and biomedical instruments on materials such as titanium, stainless steel, high-strength temperature-resistant alloys, fiber-reinforced composites, and ceramics, refractories, and other difficult-to-machine alloys. The book emphasizes machined surface accuracy and quality of surface, productivity, and automatization. It also covers creating complex, intricate, and complicated shapes for difficult-to-machine materials. The book goes on to offer an investigation on electrochemical discharge machining, abrasive-based nano-finishing, and rotary ultrasonic machining-based parametric combination, as well as discuss the latest trends in hybrid machining combined processes.This book is a firsthand reference for commercial organizations mimicking modern hybrid machining processes by targeting difficult-to-machine, materials-based applications. By capturing the current trends of today’s manufacturing practices, this book becomes a one-stop resource for scholars, manufacturing professionals, engineers, and academic researchers.

This book provides knowledge about the process of creating and designing products based on an Industry 4.0 setting. The fundamentals of Additive Manufacturing, its many technologies, the process parameters, advantages, limitations, and recent developments are discussed. In addition, the most recent post-additive manufacturing process advancements, surface quality defects, and challenges are the primary topics that will be investigated in the book. Advances in Pre- and Post-Additive Manufacturing Processes: Innovations and Applications provides scientific and technological insights into the physical fundamentals of the machining and finishing processes in macro, micro, and nanoscales. It explores in a systematic way both conventional and unconventional material-shaping processes with various modes of hybridization concerning theory modelling and industrial potential. It focuses on the applications of Additive Manufacturing that are linked to pre-stage and post-stage processes and encompasses a broad spectrum of macro, micro, and nano-processes that are utilized in manufacturing activities. The book goes on to cover a wide range of reliable and economical fabrication of metallic parts with complicated geometries which are of considerable interest to the aerospace, medical, automotive, tooling, and consumer products industries. This reference title encapsulates the current trends of today’s material development and machining techniques for advanced composite materials, making it a one-stop resource for academic researchers and industrial firms while they are formulating strategic development strategies. It also serves as a reference book for students at all levels of education, from undergraduates to doctoral candidates.

This book provides knowledge about the process of creating and designing products based on an Industry 4.0 setting. The fundamentals of Additive Manufacturing, its many technologies, the process parameters, advantages, limitations, and recent developments are discussed. In addition, the most recent post-additive manufacturing process advancements, surface quality defects, and challenges are the primary topics that will be investigated in the book. Advances in Pre- and Post-Additive Manufacturing Processes: Innovations and Applications provides scientific and technological insights into the physical fundamentals of the machining and finishing processes in macro, micro, and nanoscales. It explores in a systematic way both conventional and unconventional material-shaping processes with various modes of hybridization concerning theory modelling and industrial potential. It focuses on the applications of Additive Manufacturing that are linked to pre-stage and post-stage processes and encompasses a broad spectrum of macro, micro, and nano-processes that are utilized in manufacturing activities. The book goes on to cover a wide range of reliable and economical fabrication of metallic parts with complicated geometries which are of considerable interest to the aerospace, medical, automotive, tooling, and consumer products industries. This reference title encapsulates the current trends of today’s material development and machining techniques for advanced composite materials, making it a one-stop resource for academic researchers and industrial firms while they are formulating strategic development strategies. It also serves as a reference book for students at all levels of education, from undergraduates to doctoral candidates.

The field of machinery maintenance is undergoing a remarkable transformation, driven by the convergence of intelligent technologies and data-driven approaches. This book delves into the fascinating world of intelligent machinery fault diagnostics and prognostics, exploring how these advancements are reshaping the way we monitor, diagnose, and predict faults in machinery.Intelligent Machinery Fault Diagnostics and Prognostics: The Future of Smart Manufacturing uses an interdisciplinary approach to provide a well-rounded understanding of smart manufacturing. It discusses cutting-edge smart manufacturing technologies and encompasses various aspects, from sensors and data analytics to predictive maintenance. The book offers real-world case studies illustrating how these innovations are successfully implemented in industrial settings and includes practical guidelines and methodologies that facilitate the implementation of solutions.The book also highlights the scalability and adaptability of this approach to different industries and manufacturing environments. Whether this book is for industry professionals, students, or researchers, readers can leverage the book’s insights to optimize machinery performance, minimize downtime, reduce costs, and improve safety in their respective industries.

Smart manufacturing technologies are highly efficient and reliable and produce high-quality products. They involve autonomous and robotic systems, the Internet of Things, simulation, system integration, and additive manufacturing. These technologies enable industries to make better decisions and respond quickly to changing market conditions. They are used in various fields, including science, medicine, healthcare, and biotechnology. This handbook covers the transformation of conventional to smart manufacturing technologies and the impact of smart manufacturing on industrial engineering.Handbook of Smart Manufacturing Technologies: Industrial Engineering in the Digital Age covers various smart technologies related to the Internet of Things (IoT), Robotics, 3D/4D printing, Sustainability, and Machine Learning. It also includes case studies of conventional, advanced, and smart manufacturing, based on real-world aspects. One of the novel aspects of this book is that it provides surface integrity parameters related to machined parts manufacturing and features new product design and development by adapting control algorithms and mechatronics-assisted manufacturing technologies. Furthermore, it offers information on smart manufacturing technologies and their industrial applications.This handbook is intended to be a useful resource for industrialists, researchers, academicians, or anyone who deals with manufacturing and industrial engineering.

Artificial intelligence (AI) is revolutionizing the manufacturing industry by automating tasks at a speed, scale and scope that far surpass human capabilities. As AI continues to advance, it is clear that the future of manufacturing will be driven by intelligent systems. These systems have the potential to transform the way products are made, improving efficiency and quality across the board. AI is paving the way for a new era of manufacturing, where innovation and automation go hand in hand.Artificial Intelligence and Robotics in Manufacturing: A Sustainable Future offers a comprehensive exploration of the scientific and technological advancements in robotics-based manufacturing. This book delves into a variety of topics, including applications in the aerospace, nuclear and medical industries. Emphasizing the use of advanced AI-based robotics, this book highlights recent breakthroughs in manufacturing techniques, specifically focusing on AI applications in fabrication and machining. Additionally, it examines the rapid evolution of AI technology and addresses cost-effective solutions within the manufacturing sector.Overall, this book provides valuable insights into the intersection of AI and robotics in manufacturing, offering a glimpse into the exciting possibilities for the future of this industry and allowing this book to serve as a valuable source for academics, researchers in manufacturing, computational scientists, mechanical engineers, systems engineers, manufacturing engineers and professionals in industries related to AI and manufacturing.

As industries move toward intelligent, adaptive, and efficient manufacturing processes, the integration of (artificial intelligence) AI, (Internet of Things) IoT, signal processing, and computer vision is crucial. This book serves as a comprehensive guide for professionals, researchers, and academics seeking to leverage the power of cutting‑edge technologies in the field of smart manufacturing.Smart Manufacturing with AIoT: Signal Processing, Computer Vision, and Data Analytics is a comprehensive guide that focuses on practical implementation, bridging the gap between theoretical concepts and real‑world applications. Each chapter of this book explores a different aspect of the synergy between AI, IoT, signal processing, and computer vision, starting with foundational concepts and progressing toward advanced applications. From enhancing quality control processes to implementing proactive maintenance strategies and enabling dynamic threat assessment, this book covers a wide range of topics that define the contemporary landscape of smart manufacturing.This book explores the intricate details of AIoT, signal processing, and computer vision, providing valuable insights for both beginners and experienced professionals in the field. Readers will gain actionable knowledge that empowers them to implement transformative solutions in their smart manufacturing environments.

Sustainability and technological advancements are rapidly gaining traction on a global scale and are becoming increasingly prominent across a wide range of industries, as evidenced by current market trends. Companies are making significant investments in the research and development of smart materials that can adapt to their surroundings in real time, thereby improving their performance and productivity. The heightened interest in environmentally friendly and intelligent materials can be attributed to the recent surge in research, conferences, and patent applications in this field, highlighting the need for a comprehensive resource that can provide a thorough explanation of these developments.Green Technology and Smart Materials for Engineering Applications provides a thorough examination of smart materials, including their unique properties and applications in sustainable construction. It explores the versatile uses of green materials in different industries, emphasizing sustainable manufacturing practices and resource-efficient materials. The integration of eco-design and innovation is looked at for the creation of sustainable materials, highlighting the importance of green and smart materials in optimizing energy consumption. Additionally, the book offers insights into reuse and recycling techniques that promote circular economy principles and sustainable business models related to green and smart materials. Real-world examples and success stories are used to illustrate the environmental and economic impacts of implementing smart and green materials in various industries.This book is intended to serve as a comprehensive reference guide for academics, researchers, scholars, and professionals working in the fields of manufacturing processing, material science, and environmental engineering. The primary objective of this book is to showcase sustainability by emphasizing the diverse array of green and smart materials utilized in various engineering applications. Through this publication, readers will gain valuable insights into the importance of incorporating environmentally friendly materials into their work, ultimately contributing to a more sustainable future.

Recent decades have witnessed significant progress in zirconia‑based materials research. This comprehensive handbook explores the latest advancements and applications of these materials, providing insights into cutting‑edge manufacturing and materials science research while covering diverse industrial uses, properties, and synthesis methods. This handbook is structured into five key sections: I. Fundamentals and Materials Science, II. Industrial and Engineering Applications, III. Energy and Catalytic Applications, IV. Medical and Dental Applications, and V. Emerging Technologies.Handbook of Zirconia‑Based Materials: Manufacturing, Electrochemical, and Biomedical Engineering examines the notable characteristics and wide‑ranging applications of zirconia‑based materials. Zirconia’s distinctive properties like optical transparency, thermal stability, mechanical strength, and electrical conductivity have attracted engineers and researchers across numerous fields, including energy production, biomedical engineering, and environmental remediation. These materials find significant applications in environmental protection, sustainable energy advancement, dental implants, solid oxide fuel cells, and catalytic converters. This handbook thoroughly investigates zirconia’s crystal structure, phase transitions, and surface chemistry while exploring synthesis methodologies for nanostructured materials, from conventional to cutting‑edge approaches. It also highlights the practical industries utilizing zirconia to demonstrate its importance. This resource provides accessible insights suitable for readers with varying levels of expertise, including industrial researchers, students, professionals, and scholars in manufacturing, materials science, chemistry, and physics.

The book explores the Internet of Things (IoT) landscape, focusing on sensor technologies and wireless sensor communications. It discusses challenges in establishing interconnected sensors, network connectivity, longevity, and strategies for sustaining sensor networks in dynamic industrial environments. The book also discusses issues like tracking objects, geolocation, and network coverage optimization and highlights the impact of artificial intelligence in sensor networks and the synergies between sensor technologies and wireless communications in Industry 5.0.Sensor Technologies and Wireless Communications in Industry 5.0: A Solution for Smart Manufacturing provides a thorough examination of the Internet of Things, with a specific focus on sensor technologies and wireless sensor communications. It delves into the latest advancements in sensor precision, communication protocols, and real-world applications, offering readers cutting-edge insights into the rapidly evolving IoT landscape. Recognizing the interdisciplinary nature of IoT, this book serves as a bridge between technology, engineering, and data science. It aligns itself with the Industry 5.0 paradigm and features contributions from top researchers in the field. By anticipating emerging trends and future directions within the IoT field, this book provides readers with valuable insights into the potential trajectories of sensor technologies and wireless communications.Designed as a research tool and an educational resource for academic institutions, this book is essential for researchers, students, and educators seeking up-to-date information on IoT technologies.

In recent years, the convergence of biotechnology and manufacturing has ushered in a new era of sustainable innovation and efficiency. Incorporating bio-based materials into smart manufacturing processes has become a crucial strategy to minimize environmental impact, promote circularity, and propel technological advancements across various industries. This handbook, divided into four key sections, is a comprehensive overview and a holistic approach to the principles, applications, challenges, and opportunities associated with integrating bio-based materials into modern manufacturing practices.Handbook of Bio-Based Materials for Smart Manufacturing begins with an exploration of fundamental characteristics, properties, and processing techniques. From bio-based polymers to composites and blends, readers will gain insights into the diverse array of materials derived from renewable biomass sources and their potential applications in smart manufacturing environments. The handbook illustrates the role of bio-based materials in additive manufacturing, coatings, packaging, energy applications, automotive, aerospace, construction, biomedical, textiles, electronics, and more, showcasing the versatility and adaptability of these materials across various sectors.By examining emerging trends, future directions, and the vision for sustainable manufacturing practices, readers will gain valuable insights into the changing landscape of bio-based materials and their potential impact on the future of smart manufacturing. This handbook is a valuable resource for researchers, engineers, industry professionals, and students seeking to deepen their understanding of bio-based materials and their role in driving sustainable innovation in manufacturing.

This book discusses the thermo-mechanical and tribological behavior of various materials manufactured using additive manufacturing (AM). It examines a range of materials including metals, polymers, ceramics, and composites and provides insights into how processing parameters can be manipulated to achieve desired thermal, mechanical, and tribological characteristics. The book also addresses challenges related to the reproducibility and reliability of AM materials, offering solutions and strategies to overcome these hurdles in both research and industrial contexts.Provides an understanding of the critical thermo-mechanical and tribological properties of additive manufactured (AM) materialsExplains how thermal stresses, heat treatment, and mechanical loading affect the performance of AM materialsOffers a focused examination of friction, wear, and lubrication characteristics in AM materialsIncludes practical examples and case studies from industries such as aerospace, automotive, and biomedicalDiscusses material performance and optimization strategiesThis book is intended for graduate students and researchers in materials science, manufacturing, mechanical engineering, and industrial engineering.

Get started with C# and strengthen your knowledge of core programming concepts such as procedural, object-oriented, generic, functional, and asynchronous programming along with the latest features of C# 8Key FeaturesLearn the fundamentals of C# with the help of easy-to-follow examples and explanationsLeverage the latest features of C# 8, including nullable reference types, pattern matching enhancements, and asynchronous streamsExplore object-oriented programming, functional programming, and multithreading conceptsBook DescriptionThe C# programming language is often developers’ primary choice for creating a wide range of applications for desktop, cloud, and mobile. In nearly two decades of its existence, C# has evolved from a general-purpose, object-oriented language to a multi-paradigm language with impressive features.This book will take you through C# from the ground up in a step-by-step manner. You'll start with the building blocks of C#, which include basic data types, variables, strings, arrays, operators, control statements, and loops. Once comfortable with the basics, you'll then progress to learning object-oriented programming concepts such as classes and structures, objects, interfaces, and abstraction. Generics, functional programming, dynamic, and asynchronous programming are covered in detail. This book also takes you through regular expressions, reflection, memory management, pattern matching, exceptions, and many other advanced topics. As you advance, you'll explore the .NET Core 3 framework and learn how to use the dotnet command-line interface (CLI), consume NuGet packages, develop for Linux, and migrate apps built with .NET Framework. Finally, you'll understand how to run unit tests with the Microsoft unit testing frameworks available in Visual Studio.By the end of this book, you’ll be well-versed with the essentials of the C# language and be ready to start creating apps with it.What you will learnGet to grips with all the new features of C# 8Discover how to use attributes and reflection to build extendable applicationsUtilize LINQ to uniformly query various sources of dataUse files and streams and serialize data to JSON and XMLWrite asynchronous code with the async-await patternEmploy .NET Core tools to create, compile, and publish your applicationsCreate unit tests with Visual Studio and the Microsoft unit testing frameworksWho this book is forIf you have little experience in coding or C# and want to learn the essentials of C# programming to develop powerful programming techniques, this book is for you. It will also help aspiring programmers to write scripts or programs to accomplish specific tasks.

This book presents the select proceedings of 2nd International Conference on Emerging Materials, Smart Manufacturing, and Computational Intelligence. It provides cutting-edge knowledge about diverse technological evolutions, innovations, and developments in advanced materials and manufacturing for sustainability, energy, and health-based technologies. Further, this book expedites discussion that focuses on the recent developments and challenges in the field of sustainable and bio-inspired materials, advancements in energy engineering, green energy technologies, sustainable computing in healthcare, sustainable quantum computing, sustainable advancement in robotics and mechatronics, bio-sensors, bio-signals and medical imaging. It emphasizes sustainable development and promotes diverse methods to address field difficulties. This unique book contains the present bloom and curses in sustainable and smart manufacturing technology for a plethora of industrial applications like aerospace, automobile, marine, and biomedical specialization. This book serves as an excellent resource for beginner students, academicians, researchers, postgraduate students, scientists, and commercial manufacturers, and professionals of mechanical, manufacturing and mechatronics engineering, and other sustainable-related disciplines.

Various topics covered in this book are material processing, mechanical properties, and material characterisation, composite materials, nanomaterials, advanced engineering materials, and technologies for space, nuclear, and aerospace applications.