Claus Kuhnel – författare

The AVR RISC Microcontroller Handbook is a comprehensive guide to designing with Atmel''s new controller family, which is designed to offer high speed and low power consumption at a lower cost. The main text is divided into three sections: hardware, which covers all internal peripherals; software, which covers programming and the instruction set; and tools, which explains using Atmel''s Assembler and Simulator (available on the Web) as well as IAR''s C compiler.- Practical guide for advanced hobbyists or design professionals- Development tools and code available on the Web

BASIC Stamp: An Introduction to Microcontrollers introduces microcontroller theory using the Parallax BASIC Stamp I, II, and IIsx. The BASIC Stamp microcontroller is based on Microchip''s PIC hardware with some modifications and is very approachable for beginning users. Once the basic theory is established, BASIC Stamp, 2/E walks the reader through applications suitable for designers as well as the home hobbyist. These applications can be used as is or as a basis for further modifications to suit specific design needs. BASIC Stamp, 2/E thoroughly explains the hardware base of the BASIC Stamp microcontroller including internal architecture, the peripheral functions, as well as providing the technical data sheets for each kind of chip. The authors also explain the BASIC Stamp development systems including DOS and Windows-based tools in tremendous detail. As an added feature, BASIC Stamp, 2/E includes full instructions for using PBASIC programming and formatting. The book provides many specific applications for microcontroller use, complete with programming instructions, including: single instructions, multiple instructions, interfacing directions, and more complex applications such as motion detection, light measurement, and home automation.- Provides a keystone for the introductory level of the Newnes microelectronics titles- Introduces PIC microcontroller operation- Demonstrates applications for designers and hobbyists

BASIC Stamp: An Introduction to Microcontrollers introduces microcontroller theory using the Parallax BASIC Stamp I, II, and IIsx. The BASIC Stamp microcontroller is based on Microchip's PIC hardware with some modifications and is very approachable for beginning users. Once the basic theory is established, BASIC Stamp, 2/E walks the reader through applications suitable for designers as well as the home hobbyist. These applications can be used as is or as a basis for further modifications to suit specific design needs. BASIC Stamp, 2/E thoroughly explains the hardware base of the BASIC Stamp microcontroller including internal architecture, the peripheral functions, as well as providing the technical data sheets for each kind of chip. The authors also explain the BASIC Stamp development systems including DOS and Windows-based tools in tremendous detail. As an added feature, BASIC Stamp, 2/E includes full instructions for using PBASIC programming and formatting. The book provides many specific applications for microcontroller use, complete with programming instructions, including: single instructions, multiple instructions, interfacing directions, and more complex applications such as motion detection, light measurement, and home automation. Provides a keystone for the introductory level of the Newnes microelectronics titles Introduces PIC microcontroller operation Demonstrates applications for designers and hobbyists

The AVR RISC Microcontroller Handbook is a comprehensive guide to designing with Atmel's new controller family, which is designed to offer high speed and low power consumption at a lower cost. The main text is divided into three sections: hardware, which covers all internal peripherals; software, which covers programming and the instruction set; and tools, which explains using Atmel's Assembler and Simulator (available on the Web) as well as IAR's C compiler. Practical guide for advanced hobbyists or design professionals Development tools and code available on the Web

Arduino for the Cloud considers the Arduino Yun and the Dragino Yun Shield as components closing the gap between a typical microcontroller application and connection to the cloud. Arduino Yun combines the classic Arduino with an Atheros AR9331 system-on-a-chip (SoC) for wireless access points and routers platforms, which uses the Linux distribution Linino (OpenWRT) operating system. The Dragino Yun Shield expands any Arduino with network capabilities by the Atheros AR9331.The combination of microcontroller and Linux device supports the whole chain from sensor to software applications in the cloud by hardware and software. This book deals with the Arduino and the Linux device and their interaction, without the need of detailed Linux knowledge.

LoRaWAN hat sich als Kommunikationslösung im IoT hervorragend entwickelt. The Things Network (TTN) hat hierzu seinen Beitrag geleistet. Aktuell wird The Things Network auf The Things Stack Community Edition (TTS (CE)) aktualisiert. Die Cluster von TTN V2 werden gegen Ende 2021 geschlossen.Der Autor zeigt Ihnen die notwendigen Schritte, damit Sie in gewohnter Weise LoRaWAN-Knoten mit Hilfe von TTS (CE) betreiben und vielleicht auch das Netz der Gateways durch ein eigenes Gateway erweitern. Mittlerweile gibt es sogar für den mobilen Einsatz geeignete LoRaWAN-Gateways mit denen Sie über Ihr Mobiltelefon Verbindung zum TTN-Server aufbauen können.In diesem Buch werden eine Reihe kommerzieller und Arduino-basierter LoRaWAN-Knoten als auch neue, kostengünstige und für den Batteriebetrieb geeignete Hardware zum Aufbau autonomer LoRaWAN-Knoten vorgestellt.Die Registrierung von LoRaWAN-Knoten und Gateways im TTS (CE) sowie die Bereitstellung der erhobenen Daten über MQTT und die Visualisierung über Node-RED, Cayenne, Thingspeak und Datacake ermöglichen komplexe IoT-Projekte und völlig neue Anwendungen zu sehr geringen Kosten.Das vorliegende Buch versetzt Sie in die Lage, mit batteriebetriebenen Sensoren (LoRaWAN-Knoten) erfasste Daten drahtlos im Internet bereitzustellen und zu visualisieren.Sie lernen die Grundlagen für Smart-City- und IoT-Anwendungen, die beispielsweise die Messung von Luftqualität, Wasserständen, Schneehöhen, das Ermitteln von freien Parkfeldern (Smart Parking) und die intelligente Steuerung der Straßenbeleuchtung (Smart Lighting) u.a.m. ermöglichen.

LoRaWAN has developed excellently as a communication solution in the IoT. The Things Network (TTN) has contributed to this. The Things Network was upgraded to The Things Stack Community Edition (TTS (CE)). The TTN V2 clusters were closed towards the end of 2021.In this book, I will show you the necessary steps to operate LoRaWAN nodes using TTS (CE) and maybe extend the network of gateways with an own gateway. Meanwhile, there are even LoRaWAN gateways suitable for mobile use with which you can connect to the TTN server via your cell phone. I present several commercial LoRaWAN nodes and new, low-cost and battery-powered hardware for building autonomous LoRaWAN nodes. Registering LoRaWAN nodes and gateways in the TTS (CE), providing the collected data via MQTT and visualization via Node-RED, Cayenne, Thingspeak, and Datacake enable complex IoT projects and completely new applications at very low cost. This book will enable you to provide and visualize data collected with battery-powered sensors (LoRaWAN nodes) wirelessly on the Internet. You will learn the basics for smart city and IoT applications that enable, for example, the measurement of air quality, water levels, snow depths, the determination of free parking spaces (smart parking), and the intelligent control of street lighting (smart lighting), among others.