Daniel J. Pack – författare

This textbook provides practicing scientists and engineers a primer on the Atmel AVR microcontroller. In this second edition we highlight the popular ATmega164 microcontroller and other pin-for-pin controllers in the family with a complement of flash memory up to 128 kbytes. The second edition also adds a chapter on embedded system design fundamentals and provides extended examples on two different autonomous robots. Our approach is to provide the fundamental skills to quickly get up and operating with this internationally popular microcontroller. We cover the main subsystems aboard the ATmega164, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying hardware and software to exercise the subsystem. In all examples, we use the C programming language. We include a detailed chapter describing how to interface the microcontroller to a wide variety of input and output devices and conclude with several system level examples.Table of Contents: Atmel AVR Architecture Overview / Serial Communication Subsystem / Analog-to-Digital Conversion / Interrupt Subsystem / Timing Subsystem / Atmel AVR Operating Parameters and Interfacing / Embedded Systems Design

This book provides practicing scientists and engineers a tutorial on the fundamental concepts and use of microcontrollers. Today, microcontrollers, or single integrated circuit (chip) computers, play critical roles in almost all instrumentation and control systems. Most existing books arewritten for undergraduate and graduate students taking an electrical and/or computer engineering course. Furthermore, these texts have beenwritten with a particular model of microcontroller as the target discussion. These textbooks also require a requisite knowledge of digital design fundamentals. This textbook presents the fundamental concepts common to all microcontrollers. Our goals are to present the over–arching theory of microcontroller operation and to provide a detailed discussion on constituent subsystems available in most microcontrollers. With such goals, we envision that the theory discussed in this book can be readily applied to a wide variety of microcontroller technologies, allowing practicing scientists and engineers to become acquainted with basic concepts prior to beginning a design involving a specific microcontroller. We have found that the fundamental principles of a given microcontroller are easily transferred to other controllers. Although this is a relatively small book, it is packed with useful information for quickly coming up to speed on microcontroller concepts.

This book provides practicing scientists and engineers a tutorial on the fundamental concepts and use of microcontrollers. Today, microcontrollers, or single integrated circuit (chip) computers, play critical roles in almost all instrumentation and control systems. Most existing books arewritten for undergraduate and graduate students taking an electrical and/or computer engineering course. Furthermore, these texts have beenwritten with a particular model of microcontroller as the target discussion. These textbooks also require a requisite knowledge of digital design fundamentals. This textbook presents the fundamental concepts common to all microcontrollers. Our goals are to present the over–arching theory of microcontroller operation and to provide a detailed discussion on constituent subsystems available in most microcontrollers. With such goals, we envision that the theory discussed in this book can be readily applied to a wide variety of microcontroller technologies, allowing practicing scientists and engineers to become acquainted with basic concepts prior to beginning a design involving a specific microcontroller. We have found that the fundamental principles of a given microcontroller are easily transferred to other controllers. Although this is a relatively small book, it is packed with useful information for quickly coming up to speed on microcontroller concepts.

This textbook provides practicing scientists and engineers a primer on the Atmel AVR microcontroller. Our approach is to provide the fundamental skills to quickly get up and operating with this internationally popular microcontroller. The Atmel ATmega16 is used as a representative sample of the AVR line. The knowledge you gain on the ATmega16 can be easily translated to every other microcontroller in the AVR line. We cover the main subsystems aboard the ATmega16, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying hardware and software to exercise the subsytem. In all examples, we use the C programming language. We conclude with a detailed chapter describing how to interface the microcontroller to a wide variety of input and output devices. Table of Contents: Atmel AVR Architecture Overview / Serial Communication Subsystem / Analog-to-Digital Conversion / Interrupt Subsystem / Timing Subsystem / Atmel AVR Operating Parameters and Interfacing / ATmega16 Register Set / ATmega16 Header File

This book provides a thorough introduction to the Texas Instruments MSP430 microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful.

This book provides a thorough introduction to the Texas Instruments MSP430 microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful.

This book provides a thorough introduction to the Texas Instruments MPS432™ microcontroller. The MPS432 is a 32-bit processor with the ARM Cortex M4F architecture and a built-in floating point unit. At the core, the MSP432 features a 32-bit ARM Cortex-M4F CPU, a RISC-architecture processing unit that includes a built-in DSP engine and a floating point unit. As an extension of the ultra-low-power MSP microcontroller family, the MSP432 features ultra-low power consumption and integrated digital and analog hardware peripherals. The MSP432 is a new member to the MSP family. It provides for a seamless transition to applications requiring 32-bit processing at an operating frequency of up to 48 MHz. The processor may be programmed at a variety of levels with different programming languages including the user-friendly Energia rapid prototyping platform, in assembly language, and in C. A number of C programming options are also available to developers, starting with register-level access code where developers can directly configure the device's registers, to Driver Library, which provides a standardized set of application program interfaces (APIs) that enable software developers to quickly manipulate various peripherals available on the device. Even higher abstraction layers are also available, such as the extremely user-friendly Energia platform, that enables even beginners to quickly prototype an application on MSP432. The MSP432 LaunchPad is supported by a host of technical data, application notes, training modules, and software examples. All are encapsulated inside one handy package called MSPWare, available as both a stand-alone download package as well as on the TI Cloud development site: dev.ti.com The features of the MSP432 may be extended with a full line of BoosterPack plug-in modules. The MSP432 is also supported by a variety of third party modular sensors and software compiler companies. In the back, a thorough introduction to the MPS432 line of microcontrollers,programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will also find this book very useful. Finally, middle school and high school students will find the MSP432 highly approachable via the Energia rapid prototyping system.

This book provides a thorough introduction to the Texas Instruments MPS432™ microcontroller. The MPS432 is a 32-bit processor with the ARM Cortex M4F architecture and a built-in floating point unit. At the core, the MSP432 features a 32-bit ARM Cortex-M4F CPU, a RISC-architecture processing unit that includes a built-in DSP engine and a floating point unit. As an extension of the ultra-low-power MSP microcontroller family, the MSP432 features ultra-low power consumption and integrated digital and analog hardware peripherals. The MSP432 is a new member to the MSP family. It provides for a seamless transition to applications requiring 32-bit processing at an operating frequency of up to 48 MHz. The processor may be programmed at a variety of levels with different programming languages including the user-friendly Energia rapid prototyping platform, in assembly language, and in C. A number of C programming options are also available to developers, starting with register-level access code where developers can directly configure the device''s registers, to Driver Library, which provides a standardized set of application program interfaces (APIs) that enable software developers to quickly manipulate various peripherals available on the device. Even higher abstraction layers are also available, such as the extremely user-friendly Energia platform, that enables even beginners to quickly prototype an application on MSP432. The MSP432 LaunchPad is supported by a host of technical data, application notes, training modules, and software examples. All are encapsulated inside one handy package called MSPWare, available as both a stand-alone download package as well as on the TI Cloud development site: dev.ti.com The features of the MSP432 may be extended with a full line of BoosterPack plug-in modules. The MSP432 is also supported by a variety of third party modular sensors and software compiler companies. In the back, a thorough introduction to the MPS432 line of microcontrollers,programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will also find this book very useful. Finally, middle school and high school students will find the MSP432 highly approachable via the Energia rapid prototyping system.

This book provides a thorough introduction to the Texas Instruments MSP430™ microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra-low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, software examples, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful. This second edition introduces the MSP–EXP430FR5994 and the MSP430–EXP430FR2433 LaunchPads. Both LaunchPads are equipped with a variety of peripherals and Ferroelectric Random Access Memory (FRAM). FRAM is a nonvolatile, low-power memory with functionality similar to flash memory.

This book provides a thorough introduction to the Texas Instruments MSP430™ microcontroller. The MSP430 is a 16-bit reduced instruction set (RISC) processor that features ultra-low power consumption and integrated digital and analog hardware. Variants of the MSP430 microcontroller have been in production since 1993. This provides for a host of MSP430 products including evaluation boards, compilers, software examples, and documentation. A thorough introduction to the MSP430 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Also, practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will find this book very useful. This second edition introduces the MSP–EXP430FR5994 and the MSP430–EXP430FR2433 LaunchPads. Both LaunchPads are equipped with a variety of peripherals and Ferroelectric Random Access Memory (FRAM). FRAM is a nonvolatile, low-power memory with functionality similar to flash memory.

This textbook provides practicing scientists and engineers a primer on the Microchip AVR® microcontroller. The revised title of this book reflects the 2016 Microchip Technology acquisition of Atmel Corporation. In this third edition we highlight the popular ATmega164 microcontroller and other pin-for-pin controllers in the family with a complement of flash memory up to 128 KB. The third edition also provides an update on Atmel Studio, programming with a USB pod, the gcc compiler, the ImageCraft JumpStart C for AVR compiler, the Two-Wire Interface (TWI), and multiple examples at both the subsystem and system level. Our approach is to provide readers with the fundamental skills to quickly set up and operate with this internationally popular microcontroller. We cover the main subsystems aboard the ATmega164, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying hardware and software to operate the subsystem. In all examples,we use the C programming language. We include a detailed chapter describing how to interface the microcontroller to a wide variety of input and output devices and conclude with several system level examples including a special effects light-emitting diode cube, autonomous robots, a multi-function weather station, and a motor speed control system.

This textbook provides practicing scientists and engineers a primer on the Microchip AVR® microcontroller. The revised title of this book reflects the 2016 Microchip Technology acquisition of Atmel Corporation. In this third edition we highlight the popular ATmega164 microcontroller and other pin-for-pin controllers in the family with a complement of flash memory up to 128 KB. The third edition also provides an update on Atmel Studio, programming with a USB pod, the gcc compiler, the ImageCraft JumpStart C for AVR compiler, the Two-Wire Interface (TWI), and multiple examples at both the subsystem and system level. Our approach is to provide readers with the fundamental skills to quickly set up and operate with this internationally popular microcontroller. We cover the main subsystems aboard the ATmega164, providing a short theory section followed by a description of the related microcontroller subsystem with accompanying hardware and software to operate the subsystem. In all examples,we use the C programming language. We include a detailed chapter describing how to interface the microcontroller to a wide variety of input and output devices and conclude with several system level examples including a special effects light-emitting diode cube, autonomous robots, a multi-function weather station, and a motor speed control system.