Ewald Quak – författare

The aim of the book is to present for non-specialist researchers as well as for experts a comprehensive overview of the background, key ideas, basic methods, implementation details and a selection of solutions offered by a novel technology for the optimisation of the location of dangerous offshore activities in terms of environmental criteria, as developed in the course of the BalticWay project.   The book consists of two parts. The first part introduces the basic principles of ocean modeling and depicts the long way from the generic principles to the practical modeling of oil spills and of the propagation of other adverse impacts. The second part focuses on the techniques for solving the inverse problem of the quantification of offshore areas with respect to their potential to serve as a source of environmental danger to vulnerable regions (such as spawning, nursing or also tourist areas).   The chapters are written in a tutorial style; they are mostly self-contained and understandable for non-specialist researchers and students. They are carefully peer-reviewed by international experts. The goal was to produce a book that highlights all key steps, methods, models and data sets it is necessary to combine in order to produce a practically usable technology and/or decision support system for a particular sea region. Thus the book is useful not only as a description and a manual of this particular technology but also as a roadmap highlighting the complicated technical issues of ocean modeling for practical purposes. It describes the approaches taken by the authors in an understandable way and thus is useful for educational purposes, such as a course in industrially and environmentally relevant applications of ocean modeling. ​

The aim of the book is to present for non-specialist researchers as well as for experts a comprehensive overview of the background, key ideas, basic methods, implementation details and a selection of solutions offered by a novel technology for the optimisation of the location of dangerous offshore activities in terms of environmental criteria, as developed in the course of the BalticWay project.   The book consists of two parts. The first part introduces the basic principles of ocean modeling and depicts the long way from the generic principles to the practical modeling of oil spills and of the propagation of other adverse impacts. The second part focuses on the techniques for solving the inverse problem of the quantification of offshore areas with respect to their potential to serve as a source of environmental danger to vulnerable regions (such as spawning, nursing or also tourist areas).   The chapters are written in a tutorial style; they are mostly self-contained and understandable for non-specialist researchers and students. They are carefully peer-reviewed by international experts. The goal was to produce a book that highlights all key steps, methods, models and data sets it is necessary to combine in order to produce a practically usable technology and/or decision support system for a particular sea region. Thus the book is useful not only as a description and a manual of this particular technology but also as a roadmap highlighting the complicated technical issues of ocean modeling for practical purposes. It describes the approaches taken by the authors in an understandable way and thus is useful for educational purposes, such as a course in industrially and environmentally relevant applications of ocean modeling. ​

This book constitutes the refereed proceedings of the 5th International Conference on Digital Heritage, EuroMed 2014, held in Limassol, Cyprus, in November 2014. The 84 full and 51 short papers presented were carefully reviewed and selected from 438 submissions. They focus on the interdisciplinary and multi-disciplinary research concerning cutting edge cultural heritage informatics, -physics, chemistry and engineering and the use of technology for the representation, documentation, archiving, protection, preservation and communication of Cultural Heritage knowledge.

This book constitutes the refereed proceedings of the 5th International Conference on Digital Heritage, EuroMed 2014, held in Limassol, Cyprus, in November 2014. The 84 full and 51 short papers presented were carefully reviewed and selected from 438 submissions. They focus on the interdisciplinary and multi-disciplinary research concerning cutting edge cultural heritage informatics, -physics, chemistry and engineering and the use of technology for the representation, documentation, archiving, protection, preservation and communication of Cultural Heritage knowledge.

The aim of the book is to present for non-specialist researchers as well as for experts a comprehensive overview of the background, key ideas, basic methods, implementation details and a selection of solutions offered by a novel technology for the optimisation of the location of dangerous offshore activities in terms of environmental criteria, as developed in the course of the BalticWay project.   The book consists of two parts. The first part introduces the basic principles of ocean modeling and depicts the long way from the generic principles to the practical modeling of oil spills and of the propagation of other adverse impacts. The second part focuses on the techniques for solving the inverse problem of the quantification of offshore areas with respect to their potential to serve as a source of environmental danger to vulnerable regions (such as spawning, nursing or also tourist areas).   The chapters are written in a tutorial style; they are mostly self-contained and understandable for non-specialist researchers and students. They are carefully peer-reviewed by international experts. The goal was to produce a book that highlights all key steps, methods, models and data sets it is necessary to combine in order to produce a practically usable technology and/or decision support system for a particular sea region. Thus the book is useful not only as a description and a manual of this particular technology but also as a roadmap highlighting the complicated technical issues of ocean modeling for practical purposes. It describes the approaches taken by the authors in an understandable way and thus is useful for educational purposes, such as a course in industrially and environmentally relevant applications of ocean modeling. ​

Multiresolution methods in geometric modelling are concerned with the generation, representation, and manipulation of geometric objects at several levels of detail. Applications include fast visualization and rendering as well as coding, compression and digital transmission of 3D geometric objects.This book is based on thirteen tutorials presented during the European Summer School "Principles of Multiresolution in Geometric Modelling", held at the Munich University of Technology, Germany, during August 22-30, 2001. The book covers: subdivision; wavelets; scattered data modelling; and coding and data structures.The tutorials are designed to be introductory in character, and include supporting exercises. Other supplementary material and software can be downloaded from the Web Site www.ma.tum.de/primus 2001/.

To make full use of the ever increasing hardware capabilities of modern com­ puters, it is necessary to speedily enhance the performance and reliability of the software as well, and often without having a suitable mathematical theory readily available. In the handling of more and more complex real-life numerical problems in all sorts of applications, a modern object-oriented de­ sign and implementation of software tools has become a crucial component. The considerable challenges posed by the demand for efficient object-oriented software in all areas of scientific computing make it necessary to exchange ideas and experiences from as many different sources as possible. Motivated by the success of the first meeting of this kind in Norway in 1996, we decided to organize another International Workshop on Modern Software Tools for Scientific Computing, often referred to as SciTools'98. This workshop took place in Oslo, Norway, September 14-16, 1998. The ob­ jective was again to provide an open forum for exchange and discussion of modern, state-of-the-art software techniques applied to challenging numerical problems. The organization was undertaken jointly by the research institute SINTEF Applied Mathematics, the Departments of Mathematics and Infor­ matics at the University of Oslo, and the company Numerical Objects AS.

This edited volume addresses the importance of mathematics for industry and society by presenting highlights from contract research at the Department of Applied Mathematics at SINTEF, the largest independent research organization in Scandinavia. Examples range from computer-aided geometric design, via general purpose computing on graphics cards, to reservoir simulation for enhanced oil recovery. Contributions are written in a tutorial style.

This edited volume consists of twelve contributions related to the EU Marie Curie Transfer of Knowledge Project Cooperation of Estonian and Norwegian Scienti c Centres within Mathematics and its Applications, CENS-CMA (2005-2009), - der contract MTKD-CT-2004-013909, which ?nanced exchange visits to and from CENS, the Centre for Nonlinear Studies at the Institute of Cybernetics of Tallinn University of Technology in Estonia. Seven contributions describe research highlights of CENS members, two the work of members of CMA, the Centre of Mathematics for Applications,Univ- sity of Oslo, Norway, as the partner institution of CENS in the Marie Curie project, and three the ?eld of work of foreign research fellows, who visited CENS as part of theproject. Thestructureofthebookre?ectsthedistributionofthetopicsaddressed: Part I Waves in Solids Part II Mesoscopic Theory Part III Exploiting the Dissipation Inequality Part IV Waves in Fluids Part V Mathematical Methods The papers are written in a tutorial style, intended for non-specialist researchers and students, where the authors communicate their own experiences in tackling a problem that is currently of interest in the scienti?c community. The goal was to produce a book, which highlights the importance of applied mathematics and which can be used for educational purposes, such as material for a course or a seminar. To ensure the scienti?c quality of the contributions, each paper was carefully - viewed by two international experts. Special thanks go to all authors and referees, without whom making this book would not have been possible.

This edited volume consists of twelve contributions related to the EU Marie Curie Transfer of Knowledge Project Cooperation of Estonian and Norwegian Scienti c Centres within Mathematics and its Applications, CENS-CMA (2005-2009), - der contract MTKD-CT-2004-013909, which ?nanced exchange visits to and from CENS, the Centre for Nonlinear Studies at the Institute of Cybernetics of Tallinn University of Technology in Estonia. Seven contributions describe research highlights of CENS members, two the work of members of CMA, the Centre of Mathematics for Applications,Univ- sity of Oslo, Norway, as the partner institution of CENS in the Marie Curie project, and three the ?eld of work of foreign research fellows, who visited CENS as part of theproject. Thestructureofthebookre?ectsthedistributionofthetopicsaddressed: Part I Waves in Solids Part II Mesoscopic Theory Part III Exploiting the Dissipation Inequality Part IV Waves in Fluids Part V Mathematical Methods The papers are written in a tutorial style, intended for non-specialist researchers and students, where the authors communicate their own experiences in tackling a problem that is currently of interest in the scienti?c community. The goal was to produce a book, which highlights the importance of applied mathematics and which can be used for educational purposes, such as material for a course or a seminar. To ensure the scienti?c quality of the contributions, each paper was carefully - viewed by two international experts. Special thanks go to all authors and referees, without whom making this book would not have been possible.

Multiresolution methods in geometric modelling are concerned with the generation, representation, and manipulation of geometric objects at several levels of detail. Applications include fast visualization and rendering as well as coding, compression and digital transmission of 3D geometric objects.This book is based on thirteen tutorials presented during the European Summer School "Principles of Multiresolution in Geometric Modelling", held at the Munich University of Technology, Germany, during August 22-30, 2001. The book covers: subdivision; wavelets; scattered data modelling; and coding and data structures.The tutorials are designed to be introductory in character, and include supporting exercises. Other supplementary material and software can be downloaded from the Web Site www.ma.tum.de/primus 2001/.

This edited volume addresses the importance of mathematics for industry and society by presenting highlights from contract research at the Department of Applied Mathematics at SINTEF, the largest independent research organization in Scandinavia. Examples range from computer-aided geometric design, via general purpose computing on graphics cards, to reservoir simulation for enhanced oil recovery. Contributions are written in a tutorial style.

This edited volume consists of twelve contributions related to the EU Marie Curie Transfer of Knowledge Project Cooperation of Estonian and Norwegian Scienti c Centres within Mathematics and its Applications, CENS-CMA (2005-2009), - der contract MTKD-CT-2004-013909, which ?nanced exchange visits to and from CENS, the Centre for Nonlinear Studies at the Institute of Cybernetics of Tallinn University of Technology in Estonia. Seven contributions describe research highlights of CENS members, two the work of members of CMA, the Centre of Mathematics for Applications,Univ- sity of Oslo, Norway, as the partner institution of CENS in the Marie Curie project, and three the ?eld of work of foreign research fellows, who visited CENS as part of theproject. Thestructureofthebookre?ectsthedistributionofthetopicsaddressed: Part I Waves in Solids Part II Mesoscopic Theory Part III Exploiting the Dissipation Inequality Part IV Waves in Fluids Part V Mathematical Methods The papers are written in a tutorial style, intended for non-specialist researchers and students, where the authors communicate their own experiences in tackling a problem that is currently of interest in the scienti?c community. The goal was to produce a book, which highlights the importance of applied mathematics and which can be used for educational purposes, such as material for a course or a seminar. To ensure the scienti?c quality of the contributions, each paper was carefully - viewed by two international experts. Special thanks go to all authors and referees, without whom making this book would not have been possible.

To make full use of the ever increasing hardware capabilities of modern com­ puters, it is necessary to speedily enhance the performance and reliability of the software as well, and often without having a suitable mathematical theory readily available. In the handling of more and more complex real-life numerical problems in all sorts of applications, a modern object-oriented de­ sign and implementation of software tools has become a crucial component. The considerable challenges posed by the demand for efficient object-oriented software in all areas of scientific computing make it necessary to exchange ideas and experiences from as many different sources as possible. Motivated by the success of the first meeting of this kind in Norway in 1996, we decided to organize another International Workshop on Modern Software Tools for Scientific Computing, often referred to as SciTools''98. This workshop took place in Oslo, Norway, September 14-16, 1998. The ob­ jective was again to provide an open forum for exchange and discussion of modern, state-of-the-art software techniques applied to challenging numerical problems. The organization was undertaken jointly by the research institute SINTEF Applied Mathematics, the Departments of Mathematics and Infor­ matics at the University of Oslo, and the company Numerical Objects AS.

Multiresolution methods in geometric modelling are concerned with the generation, representation, and manipulation of geometric objects at several levels of detail. Applications include fast visualization and rendering as well as coding, compression and digital transmission of 3D geometric objects.This book is based on thirteen tutorials presented during the European Summer School "Principles of Multiresolution in Geometric Modelling", held at the Munich University of Technology, Germany, during August 22-30, 2001. The book covers: subdivision; wavelets; scattered data modelling; and coding and data structures.The tutorials are designed to be introductory in character, and include supporting exercises. Other supplementary material and software can be downloaded from the Web Site www.ma.tum.de/primus 2001/.

This book contains selected contributions from some of the most renowned researchers in the field of Digital Heritage and 3D representation of the Past, based in large part on invited presentations from the workshop “Computational Geometry and Ontologies for Cultural Heritage 3D Digital Libraries: What are the future alternatives for Europeana?” which was held in conjunction with the International Conference on Cultural Heritage EuroMed2012 (www.euromed2012.eu) on the island of Cyprus in October 2012. This was the official event of the Cyprus Presidency of the Council of the European Union on Progress in Cultural Heritage Preservation. The aim of this book is to provide an insight to ongoing research and future directions in this novel, continuously very promising and multi-disciplinary evolving field, which lies at the intersection of digital heritage, engineering, computer science, mathematics, material science, architecture, civil engineering and archaeology.