Geoffrey E. Blight - Böcker

The book is a comprehensive treatment of the application of geotechnical engineering to site selection, site exploration, design, operation and closure of mine waste storage facilities.The level and content are suitable as a technical source and reference for practising engineers engaged both in the design and operational management of mine waste storage facilities and for senior undergraduate and postgraduate students. The thirteen chapters follow the sequence of the life cycle of a waste storage facility (characterization, site selection, geotechnical exploration, environmental aspects, testing and compaction) and also consider the use of mine waste as a construction material.The text is liberally illustrated by both line drawings and photographs, and the theoretical passages are supported by typical test results, worked examples and carefully analysed case histories.

The book is a comprehensive treatment of the application of geotechnical engineering to site selection, site exploration, design, operation and closure of mine waste storage facilities.The level and content are suitable as a technical source and reference for practising engineers engaged both in the design and operational management of mine waste storage facilities and for senior undergraduate and postgraduate students. The thirteen chapters follow the sequence of the life cycle of a waste storage facility (characterization, site selection, geotechnical exploration, environmental aspects, testing and compaction) and also consider the use of mine waste as a construction material.The text is liberally illustrated by both line drawings and photographs, and the theoretical passages are supported by typical test results, worked examples and carefully analysed case histories.

Since AAR was first identified in 1940, it has been a subject dominated by studies of the mineralogy of AAR-susceptible aggregates, the chemistry of the AAR and related reactions and laboratory tests used to diagnose AAR and predict potential future swelling. Civil and structural engineers have found the literature bewildering and difficult to apply to their immediate requirements of assessing the present and future effects of AAR on the strength, safety and serviceability of plain and reinforced concrete structures. The book discusses methods that can be used for laboratory destructive and in situ non-destructive testing to assess the effects of AAR, and in-service measurements and load-testing to assess the present and future safety of reinforced concrete structures. Methods of repair and rehabilitation and their long-term success are discussed, as are methods of halting or slowing the progress of AAR. At the same time, the fundamentals of AAR are explained in terms intelligible to the civil and structural engineer who is primarily trained in structural mechanics and design, but also needs to have a basic understanding of the AAR process and its effects on concrete.

There are other books on unsaturated soil mechanics, but this book is different. Unsaturated soil mechanics is only one aspect of a continuous range of soil mechanics studies that extends from the rheology of high water content soil slurries to the mechanics of soft soils, to stiff saturated soils, to unsaturated soils, and, at the far end of the range, to dry soils.In reality, the water content of all soils, that are not permanently submerged, varies seasonally. In most climatic zones, rainfall varies during the year and the depth of the water table varies sympathetically. In applying unsaturated soil mechanics in practice, it is therefore important to realise and allow for the probability that soil will, either seasonally or occasionally, pass from the unsaturated to the saturated state and even from unsaturation to dryness. This is the only book that looks specifically at this essential practical aspect.The theory of unsaturated soils is fully dealt with in all of its aspects, including its application to natural undisturbed soils and compacted soils. Application of the theory to soil-like materials such as mine waste and municipal solid waste is also covered. Application of the theory to practice is illustrated by a number of detailed case histories. Unsaturated soil mechanics principles can also successfully and usefully be applied in related fields such as the bulk storage of particulate materials, underground mine support, solution mining and concrete structures. Several case histories are given that illustrate these practical applications.The author has been professionally engaged in practical research and application of unsaturated soil mechanics for close to 60 years and with this book shares his wide experience with the reader.

Residual soils are found in many parts of the world and are used extensively as construction materials for roads, embankments and dams, and to support the foundations of buildings, bridges and load-bearing pavements. The characteristics and engineering properties of residual soils can differ significantly from those of the more familiar transported soils. The fact that residual soils occur often in areas with tropical and sub-tropical climates and (extensively) in semi-arid climates, adds another dimension to their engineering performance, that of unsaturation.Although there are many books that deal with the mechanics of soils, these are based mainly on the characteristics and behaviour of saturated transported soils. The first edition of this book was the first book to be written specifically about the mechanics of residual soils. The book was prepared by a panel of authors drawn from the Technical Committee on Tropical and Residual Soils of the International Society for Soil Mechanics and Foundation Engineering. It was written as a practical professional guide for geotechnical engineers working with residual soils.The second edition has retained the valuable information contained in the first edition. The present editors and authors have extensively revised and augmented the content to bring it completely up to date, adding significantly to the sections on unsaturated soil mechanics and expanding the range and number of instructive case histories. Furthermore, sections on pedocretes, dispersive soils and karst have been added.

Residual soils are found in many parts of the world and are used extensively as construction materials for roads, embankments and dams, and to support the foundations of buildings, bridges and load-bearing pavements. The characteristics and engineering properties of residual soils can differ significantly from those of the more familiar transported soils. The fact that residual soils occur often in areas with tropical and sub-tropical climates and (extensively) in semi-arid climates, adds another dimension to their engineering performance, that of unsaturation.Although there are many books that deal with the mechanics of soils, these are based mainly on the characteristics and behaviour of saturated transported soils. The first edition of this book was the first book to be written specifically about the mechanics of residual soils. The book was prepared by a panel of authors drawn from the Technical Committee on Tropical and Residual Soils of the International Society for Soil Mechanics and Foundation Engineering. It was written as a practical professional guide for geotechnical engineers working with residual soils.The second edition has retained the valuable information contained in the first edition. The present editors and authors have extensively revised and augmented the content to bring it completely up to date, adding significantly to the sections on unsaturated soil mechanics and expanding the range and number of instructive case histories. Furthermore, sections on pedocretes, dispersive soils and karst have been added.

Since AAR was first identified in 1940, it has been a subject dominated by studies of the mineralogy of AAR-susceptible aggregates, the chemistry of the AAR and related reactions and laboratory tests used to diagnose AAR and predict potential future swelling. Civil and structural engineers have found the literature bewildering and difficult to apply to their immediate requirements of assessing the present and future effects of AAR on the strength, safety and serviceability of plain and reinforced concrete structures. The book discusses methods that can be used for laboratory destructive and in situ non-destructive testing to assess the effects of AAR, and in-service measurements and load-testing to assess the present and future safety of reinforced concrete structures. Methods of repair and rehabilitation and their long-term success are discussed, as are methods of halting or slowing the progress of AAR. At the same time, the fundamentals of AAR are explained in terms intelligible to the civil and structural engineer who is primarily trained in structural mechanics and design, but also needs to have a basic understanding of the AAR process and its effects on concrete.