Günther Seliger – författare

With a focus on manufacturing advances and practices driving the circular economy, the chapters selected for this book report on sustainable manufacturing technologies for the mobility, energy and construction sector, and for machines and equipments, covering applications of artificial intelligence and industry 4.0.

This is an open access book. It gathers the proceedings of the 19th Global Conference on Sustainable Manufacturing, held on December 4-6, 2023, in Buenos Aires, Argentina. With a focus on sustainable manufacturing advances and practices as a driver for growth, the chapters selected for this book report on sustainable production technologies for the mobility, energy and construction sector, and for machines and equipment, covering aspects of digitalization and circular economy. Moreover, they discuss energy-efficient process, waste reuse, and CO2 neutral production, giving a special emphasis to developing sustainable manufacturing in Latin America. This book offers extensive and timely information for both researchers and professionals in the field of manufacturing and business development.

With a focus on sustainable manufacturing strategies for decarbonizing supply chains, the chapters selected for this book report on models applied to, and results achieved in the mobility, energy, and construction sector, covering both aspects of digitalization and the combined application of circular economy and artificial intelligence.

This is an open access book. It gathers the second volume of the proceedings of the 21st Global Conference on Sustainable Manufacturing, held on September 10–12, 2025, in Bologna, Italy. With a focus on Safe and Sustainable Value Creation by Design, the chapters in this book report on advances relating to sustainable supply chain, remanufacturing and eco-design, and sustainability assessment. They also cover applications of digitalization and artificial intelligence to improve manufacturing efficiency and reducing its environmental impact, and in sustainable education and training. All in all, they offer extensive and timely information for both researchers and professionals in the field of manufacturing and business development.

This is an open access book. It gathers the first volume of the proceedings of the 21st Global Conference on Sustainable Manufacturing, held on September 10–12, 2025, in Bologna, Italy. With a focus on Safe and Sustainable Value Creation by Design, the chapters in this book report on strategies towards the sustainable transformation of industry.  They cover applications of Lean Six Sigma, circularity evaluation, and methods for footprint calculations. They discuss new design approaches and advances in additive manufacturing and materials to improve safety and sustainability. All in all, they offer extensive and timely information for both researchers and professionals in the field of manufacturing and business development.

The volume is structured in four chapters covering the following topics: sustainable manufacturing technology, sustainable product development, sustainable value creation networks and systematic change towards sustainable manufacturing.

The volume is structured in four chapters covering the following topics: sustainable manufacturing technology, sustainable product development, sustainable value creation networks and systematic change towards sustainable manufacturing.

Population growth and increasing resource consumption are global challenges which have to be coped by sustainable development. Increasing the use productivity of resources by new cycle economical concepts supported by innovative technologies is significantly contributing to this ambitious goal. These challenges were accepted by several research institutions at the Technical University Berlin and lead to the establishment of the Collaborative Research Center (Sfb) 281 Dissassembly Factories for the Recovery of Resources in Product and Material Cycles funded by the German Research Foundation in 1995. Numerous scientific results are available after 12 years of research, which are discussed within this book: Management of industrial experience and education, technology innovation for products and processes of cycle economy are presented in a systemic frame of ecological, economical and socio-political criteria under the consideration of human necessities and limit natural resources. Methods and tools for a sustainable product development, planning methods for cycle economy, the presentation of concepts for product accompanying information systems and innovative disassembly technology are exemplarily to be distinguished. The book makes therefore a contribution to the increase of use productivity of resources. The challenges of sustainable manufacturing cannot be coped on a regional scale - but have to be addressed on a global level. For that reason, long lasting international cooperation's has been established within the Sfb 281 enriching the research work. International partners of TUB have contributed for the success of this book.

Population growth and increasing resource consumption are global challenges which have to be coped by sustainable development. Increasing the use productivity of resources by new cycle economical concepts supported by innovative technologies is significantly contributing to this ambitious goal. These challenges were accepted by several research institutions at the Technical University Berlin and lead to the establishment of the Collaborative Research Center (Sfb) 281 Dissassembly Factories for the Recovery of Resources in Product and Material Cycles funded by the German Research Foundation in 1995. Numerous scientific results are available after 12 years of research, which are discussed within this book: Management of industrial experience and education, technology innovation for products and processes of cycle economy are presented in a systemic frame of ecological, economical and socio-political criteria under the consideration of human necessities and limit natural resources. Methods and tools for a sustainable product development, planning methods for cycle economy, the presentation of concepts for product accompanying information systems and innovative disassembly technology are exemplarily to be distinguished. The book makes therefore a contribution to the increase of use productivity of resources. The challenges of sustainable manufacturing cannot be coped on a regional scale - but have to be addressed on a global level. For that reason, long lasting international cooperation''s has been established within the Sfb 281 enriching the research work. International partners of TUB have contributed for the success of this book.

Population growth and increasing resource consumption are global challenges which have to be coped by sustainable development. Increasing the use productivity of resources by new cycle economical concepts supported by innovative technologies is significantly contributing to this ambitious goal. These challenges were accepted by several research institutions at the Technical University Berlin and lead to the establishment of the Collaborative Research Center (Sfb) 281 Dissassembly Factories for the Recovery of Resources in Product and Material Cycles funded by the German Research Foundation in 1995. Numerous scientific results are available after 12 years of research, which are discussed within this book: Management of industrial experience and education, technology innovation for products and processes of cycle economy are presented in a systemic frame of ecological, economical and socio-political criteria under the consideration of human necessities and limit natural resources. Methods and tools for a sustainable product development, planning methods for cycle economy, the presentation of concepts for product accompanying information systems and innovative disassembly technology are exemplarily to be distinguished. The book makes therefore a contribution to the increase of use productivity of resources. The challenges of sustainable manufacturing cannot be coped on a regional scale - but have to be addressed on a global level. For that reason, long lasting international cooperation's has been established within the Sfb 281 enriching the research work. International partners of TUB have contributed for the success of this book.

New technologies have to be developed and applied for a Sustainable Product Development and Life Cycle Engineering to fulfill the needs of humankind, protecting public health, welfare, and environment.

Non-renewable materials can no longer be disposed once humankind''s ever increasing needs cannot be fulfilled anymore due to limited resources. Reuse and recycling become inevitable requirements for product and process design. Renewable resources must not be consumed in quantities higher than can be regained. New technologies have to be developed and applied for a Sustainable Product Development and Life Cycle Engineering to fulfill the needs of humankind, protecting public health, welfare, and environment.The 8th Global Conference on Sustainable Manufacturing brings together some of the world’s leading experts to present a scientific conference in Abu Dhabi, one of the world’s fastest growing economies and a global leader in the development of sustainable technologies.The conference will focus on 7 areas:Value adding by sustainable manufacturing in the UAE Potentials of renewables Education for sustainability engineering Green supply chain and transportation Microelectronics and resource efficiency Technology driven startups Sustainable products and manufacturing processes

The annual series Global Conferences on Sustainable Manufacturing (GCSM) sponsored by the International Academy for Production Engineering (CIRP) is committed to excellence in the creation of sustainable products and processes that conserve energy and natural resources, have minimal negative impacts upon the natural environment and society, andadhere to the core principle of sustainability by considering the needs of the present without compromising the ability of future generations to meet their own needs. To promote this noble goal, there is a great need for increased awareness in education and training, including the dissemination of new findings on principles and practices of sustainability applied to manufacturing. The series Global Conferences on Sustainable Manufacturing offers international colleagues the opportunity to network, expand their knowledge, and improve practice globally.

The annual series Global Conferences on Sustainable Manufacturing (GCSM) sponsored by the International Academy for Production Engineering (CIRP) is committed to excellence in the creation of sustainable products and processes that conserve energy and natural resources, have minimal negative impacts upon the natural environment and society, andadhere to the core principle of sustainability by considering the needs of the present without compromising the ability of future generations to meet their own needs. To promote this noble goal, there is a great need for increased awareness in education and training, including the dissemination of new findings on principles and practices of sustainability applied to manufacturing. The series Global Conferences on Sustainable Manufacturing offers international colleagues the opportunity to network, expand their knowledge, and improve practice globally.

Non-renewable materials can no longer be disposed once humankind's ever increasing needs cannot be fulfilled anymore due to limited resources. Reuse and recycling become inevitable requirements for product and process design. Renewable resources must not be consumed in quantities higher than can be regained. New technologies have to be developed and applied for a Sustainable Product Development and Life Cycle Engineering to fulfill the needs of humankind, protecting public health, welfare, and environment.The 8th Global Conference on Sustainable Manufacturing brings together some of the world’s leading experts to present a scientific conference in Abu Dhabi, one of the world’s fastest growing economies and a global leader in the development of sustainable technologies.The conference will focus on 7 areas:Value adding by sustainable manufacturing in the UAE Potentials of renewables Education for sustainability engineering Green supply chain and transportation Microelectronics and resource efficiency Technology driven startups Sustainable products and manufacturing processes

The annual series Global Conferences on Sustainable Manufacturing (GCSM) sponsored by the International Academy for Production Engineering (CIRP) is committed to excellence in the creation of sustainable products and processes that conserve energy and natural resources, have minimal negative impacts upon the natural environment and society, andadhere to the core principle of sustainability by considering the needs of the present without compromising the ability of future generations to meet their own needs. To promote this noble goal, there is a great need for increased awareness in education and training, including the dissemination of new findings on principles and practices of sustainability applied to manufacturing. The series Global Conferences on Sustainable Manufacturing offers international colleagues the opportunity to network, expand their knowledge, and improve practice globally.