Hermann Janeschitz-Kriegl – författare

In addition to structure formation in crystallizing polymers and semicrystalline polymers, this second edition completes the topic of transport phenomena. It also reviews solidification by crystallization during cooling and under flow or pressure, which all play an enormous role in polymer melt processing.Generally, there is an intensive interaction between three transport phenomena: heat transfer, momentum transfer (flow, rheology) and (flow induced) crystallization. The strong interaction between the three transport phenomena is a major challenge when it comes to experimentation, and advances in this area are detailed in the book, guiding further development of sound modeling. This book enables readers to follow an advanced course in polymer processing. It is a valuable resource for polymer chemists, applied physicists, rheologists, plastics engineers, mold makers and material scientists.

Structure formation in crystallizing polymers, as occurring during processing, has not been treated so far in a coherent form. This fact explains, why this monograph is written as the ?rst book devoted to this subject. A quarter of a century ago the underdevelopment of this subject was obvious. Trial and error dominated. In fact, other apposite subjects as polymer melt rheology or heat transfer, had reached high levels. A great number of books has been devoted to them. Mold ?lling of amorphous polymers and the solidi?cation of these polymers by vitri?cation can nowadays be simulated numerically with a high degree of accuracy. In the solidi?ed sample even residual stresses and corresponding birefringence effects can accurately be 1 calculated . However, semicrystalline polymers, which form the majority of industrial po- mers, have been excluded from these considerations for good reasons. In fact, great uncertainties existed about the formation of quality determining crystalline str- tures. In particular, polyole?ns suffered from this shortcoming. In 1983 this fact instigated the polymer research group at the Johannes Kepler University in Linz to start with pertinent activities. The urgency of this kind of studies becomes evident, if advantages and hitches of these polymers are considered. 1. Versatility of processing: Injection molding into a great variety of shapes and sizes, from thin walled beakers to garden chairs, not to forget pipe and pro?le extrusion, cable coating, ?ber spinning, ?lm blowing. 2. Product qualities: Ductility, low density, good electric insulation, corrosion resistance, surface quality.

Structure formation in crystallizing polymers, as occurring during processing, has not been treated so far in a coherent form. This fact explains, why this monograph is written as the ?rst book devoted to this subject. A quarter of a century ago the underdevelopment of this subject was obvious. Trial and error dominated. In fact, other apposite subjects as polymer melt rheology or heat transfer, had reached high levels. A great number of books has been devoted to them. Mold ?lling of amorphous polymers and the solidi?cation of these polymers by vitri?cation can nowadays be simulated numerically with a high degree of accuracy. In the solidi?ed sample even residual stresses and corresponding birefringence effects can accurately be 1 calculated . However, semicrystalline polymers, which form the majority of industrial po- mers, have been excluded from these considerations for good reasons. In fact, great uncertainties existed about the formation of quality determining crystalline str- tures. In particular, polyole?ns suffered from this shortcoming. In 1983 this fact instigated the polymer research group at the Johannes Kepler University in Linz to start with pertinent activities. The urgency of this kind of studies becomes evident, if advantages and hitches of these polymers are considered. 1. Versatility of processing: Injection molding into a great variety of shapes and sizes, from thin walled beakers to garden chairs, not to forget pipe and pro?le extrusion, cable coating, ?ber spinning, ?lm blowing. 2. Product qualities: Ductility, low density, good electric insulation, corrosion resistance, surface quality.

In addition to structure formation in crystallizing polymers and semicrystalline polymers, this second edition completes the topic of transport phenomena. It also reviews solidification by crystallization during cooling and under flow or pressure, which all play an enormous role in polymer melt processing.Generally, there is an intensive interaction between three transport phenomena: heat transfer, momentum transfer (flow, rheology) and (flow induced) crystallization. The strong interaction between the three transport phenomena is a major challenge when it comes to experimentation, and advances in this area are detailed in the book, guiding further development of sound modeling. This book enables readers to follow an advanced course in polymer processing. It is a valuable resource for polymer chemists, applied physicists, rheologists, plastics engineers, mold makers and material scientists.

The present monograph is intended as an introduction into a field which certainly did not receive proper attention in the past. It is one of the aims of this book to verify this suppo­ sition. The author hopes to show that the technique of the measurement of flow birefringence can fulfil an important com­ plementary task in polymer melt rheology. From this point it is expected that the present monograph will attract the atten­ tion of polymer scientists in general, and of rheologists and process engineers in particular. Certainly, the fourth chapter will appeal to the latter group. As a teacher in polymer science and technology the author wants to address also the group of the graduate students. In fact, the standard knowledge acquired during usual university studies in chemistry, physics or engineering does not enable a quick start of research activities in the field of polymer melt rheology. Certainly, in this typically interdisciplinary field everyone can lay emphasis on matters which are familar to hirn because of his preceding education. Significant research activities, however, can only be generated on the basis of a more universal knowledge. In the absence of this knowledge beginners have to rely upon the guidance of their supervisors for an unduly long period. Otherwise they take the risk of losing too much of their costly time. This holds in particular for the experimentalists who cannot be dispensed from being familiar with the necessary theoretical background.

The present monograph is intended as an introduction into a field which certainly did not receive proper attention in the past. It is one of the aims of this book to verify this suppo­ sition. The author hopes to show that the technique of the measurement of flow birefringence can fulfil an important com­ plementary task in polymer melt rheology. From this point it is expected that the present monograph will attract the atten­ tion of polymer scientists in general, and of rheologists and process engineers in particular. Certainly, the fourth chapter will appeal to the latter group. As a teacher in polymer science and technology the author wants to address also the group of the graduate students. In fact, the standard knowledge acquired during usual university studies in chemistry, physics or engineering does not enable a quick start of research activities in the field of polymer melt rheology. Certainly, in this typically interdisciplinary field everyone can lay emphasis on matters which are familar to hirn because of his preceding education. Significant research activities, however, can only be generated on the basis of a more universal knowledge. In the absence of this knowledge beginners have to rely upon the guidance of their supervisors for an unduly long period. Otherwise they take the risk of losing too much of their costly time. This holds in particular for the experimentalists who cannot be dispensed from being familiar with the necessary theoretical background.