Häftad, Spanska
242 kr
Skickas inom 3-6 vardagar
Jesus Carretero – författare
Visar alla böcker från författaren Jesus Carretero. Handla med fri frakt och snabb leverans.
16 produkter
16 produkter
- Inbunden, Engelska, 2019
1 796 kr
Skickas inom 3-6 vardagar
The needs of future digital data and computer systems are expected to be two to three orders of magnitude larger than for today's systems, to take account of unprecedented amounts of heterogeneous hardware, lines of source code, numbers of users, and volumes of data. Ultrascale computing systems (UCS) are a solution. Envisioned as large-scale complex systems joining parallel and distributed computing systems, which can be located at multiple sites and cooperate to provide the required resources and performance to the users, these technologies will extend individual systems to provide the resources that are very much needed.Based on the research work in the COST Action IC 1305 Network for Sustainable Ultrascale Computing (NESUS) this book presents important results and methods towards achieving sustainable UCS. The authors present a wide range of emerging programming models that facilitate the task of scaling and extracting performance on continuously evolving platforms, while providing resilience and fault-tolerant mechanisms to tackle the increasing probability of failures throughout the entire software stack. These methods are needed to achieve scale handling, better programmability and adaptation to rapidly changing underlying computing architecture, data centric programming models, resilience, and energy-efficiency. - Del 14801 - Lecture Notes in Computer Science
Euro-Par 2024: Parallel Processing
30th European Conference on Parallel and Distributed Processing, Madrid, Spain, August 26–30, 2024, Proceedings, Part I
Häftad, Engelska, 2024689 kr
Skickas inom 5-8 vardagar
The three-volume set LNCS 14801, 14802, and 14803 constitutes the proceedings of the 30th European Conference on Parallel and Distributed Processing, Euro-Par 2024, which took place in Madrid, Spain, during August 26–30, 2024.The 88 full papers included in the proceedings were carefully reviewed and selected from 293 submissions. They were organized in topical sections as follows:Part I: Programming, compilers, and performance; scheduling, resource management, cloud, edge computing, and workflows; Part II: Architectures and accelerators; data analytics, AI and computational science; Part III: Theory and algorithms; multidisciplinary, domain-specific and applied parallel and distributed computing. - E-bokEngelska, 2024
903 kr
Läs direkt efter köp
The three-volume set LNCS 14801, 14802, and 14803 constitutes the proceedings of the 30th European Conference on Parallel and Distributed Processing, Euro-Par 2024, which took place in Madrid, Spain, during August 26–30, 2024.
The 88 full papers included in the proceedings were carefully reviewed and selected from 293 submissions. They were organized in topical sections as follows:
Part I: Programming, compilers, and performance; scheduling, resource management, cloud, edge computing, and workflows;
Part II: Architectures and accelerators; data analytics, AI and computational science;
Part III: Theory and algorithms; multidisciplinary, domain-specific and applied parallel and distributed computing.
- Del 14803 - Lecture Notes in Computer Science
Euro-Par 2024: Parallel Processing
30th European Conference on Parallel and Distributed Processing, Madrid, Spain, August 26–30, 2024, Proceedings, Part III
Häftad, Engelska, 2024916 kr
Skickas inom 5-8 vardagar
The three-volume set LNCS 14801, 14802, and 14803 constitutes the proceedings of the 30th European Conference on Parallel and Distributed Processing, Euro-Par 2024, which took place in Madrid, Spain, during August 26–30, 2024.The 88 full papers included in the proceedings were carefully reviewed and selected from 293 submissions. They were organized in topical sections as follows:Part I: Programming, compilers, and performance; scheduling, resource management, cloud, edge computing, and workflows; Part II: Architectures and accelerators; data analytics, AI and computational science; Part III: Theory and algorithms; multidisciplinary, domain-specific and applied parallel and distributed computing. - E-bokEngelska, 2024
1 150 kr
Läs direkt efter köp
The three-volume set LNCS 14801, 14802, and 14803 constitutes the proceedings of the 30th European Conference on Parallel and Distributed Processing, Euro-Par 2024, which took place in Madrid, Spain, during August 26–30, 2024.
The 88 full papers included in the proceedings were carefully reviewed and selected from 293 submissions. They were organized in topical sections as follows:
Part I: Programming, compilers, and performance; scheduling, resource management, cloud, edge computing, and workflows;
Part II: Architectures and accelerators; data analytics, AI and computational science;
Part III: Theory and algorithms; multidisciplinary, domain-specific and applied parallel and distributed computing.
- Del 14802 - Lecture Notes in Computer Science
Euro-Par 2024: Parallel Processing
30th European Conference on Parallel and Distributed Processing, Madrid, Spain, August 26–30, 2024, Proceedings, Part II
Häftad, Engelska, 2024802 kr
Skickas inom 5-8 vardagar
The three-volume set LNCS 14801, 14802, and 14803 constitutes the proceedings of the 30th European Conference on Parallel and Distributed Processing, Euro-Par 2024, which took place in Madrid, Spain, during August 26–30, 2024.The 88 full papers included in the proceedings were carefully reviewed and selected from 293 submissions. They were organized in topical sections as follows:Part I: Programmind, compilers, and performance; scheduling, resource management, cloud, edge computing, and workflows; Part II: Architectures and accelerators; data analytics, AI and computational science; Part III: Theory and algorithms; multidisciplinary, domain-specific and applied parallel and distributed computing. - E-bokEngelska, 2024
978 kr
Läs direkt efter köp
The three-volume set LNCS 14801, 14802, and 14803 constitutes the proceedings of the 30th European Conference on Parallel and Distributed Processing, Euro-Par 2024, which took place in Madrid, Spain, during August 26–30, 2024.
The 88 full papers included in the proceedings were carefully reviewed and selected from 293 submissions. They were organized in topical sections as follows:
Part I: Programmind, compilers, and performance; scheduling, resource management, cloud, edge computing, and workflows;
Part II: Architectures and accelerators; data analytics, AI and computational science;
Part III: Theory and algorithms; multidisciplinary, domain-specific and applied parallel and distributed computing.
- Del 8806 - Lecture Notes in Computer Science
Euro-Par 2014: Parallel Processing Workshops
Euro-Par 2014 International Workshops, Porto, Portugal, August 25-26, 2014, Revised Selected Papers, Part II
Häftad, Engelska, 2014576 kr
Skickas inom 10-15 vardagar
The two volumes LNCS 8805 and 8806 constitute the thoroughly refereed post-conference proceedings of 18 workshops held at the 20th International Conference on Parallel Computing, Euro-Par 2014, in Porto, Portugal, in August 2014. The 100 revised full papers presented were carefully reviewed and selected from 173 submissions. The volumes include papers from the following workshops: APCI&E (First Workshop on Applications of Parallel Computation in Industry and Engineering - BigDataCloud (Third Workshop on Big Data Management in Clouds) - DIHC (Second Workshop on Dependability and Interoperability in Heterogeneous Clouds) - FedICI (Second Workshop on Federative and Interoperable Cloud Infrastructures) - Hetero Par (12th International Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms) - HiBB (5th Workshop on High Performance Bioinformatics and Biomedicine) - LSDVE (Second Workshop on Large Scale Distributed Virtual Environments on Clouds and P2P) - MuCoCoS (7th International Workshop on Multi-/Many-core Computing Systems) - OMHI (Third Workshop on On-chip Memory Hierarchies and Interconnects) - PADAPS (Second Workshop on Parallel and Distributed Agent-Based Simulations) - PROPER (7th Workshop on Productivity and Performance) - Resilience (7th Workshop on Resiliency in High Performance Computing with Clusters, Clouds, and Grids) - REPPAR (First International Workshop on Reproducibility in Parallel Computing) - ROME (Second Workshop on Runtime and Operating Systems for the Many Core Era) - SPPEXA (Workshop on Software for Exascale Computing) - TASUS (First Workshop on Techniques and Applications for Sustainable Ultrascale Computing Systems) - UCHPC (7th Workshop on Un Conventional High Performance Computing) and VHPC (9th Workshop on Virtualization in High-Performance Cloud Computing. - E-bokPDF, Engelska, 2014
739 kr
Läs direkt efter köp
The two volumes LNCS 8805 and 8806 constitute the thoroughly refereed post-conference proceedings of 18 workshops held at the 20th International Conference on Parallel Computing, Euro-Par 2014, in Porto, Portugal, in August 2014. The 100 revised full papers presented were carefully reviewed and selected from 173 submissions. The volumes include papers from the following workshops: APCI&E (First Workshop on Applications of Parallel Computation in Industry and Engineering - BigDataCloud (Third Workshop on Big Data Management in Clouds) - DIHC (Second Workshop on Dependability and Interoperability in Heterogeneous Clouds) - FedICI (Second Workshop on Federative and Interoperable Cloud Infrastructures) - Hetero Par (12th International Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms) - HiBB (5th Workshop on High Performance Bioinformatics and Biomedicine) - LSDVE (Second Workshop on Large Scale Distributed Virtual Environments on Clouds and P2P) - MuCoCoS (7th International Workshop on Multi-/Many-core Computing Systems) - OMHI (Third Workshop on On-chip Memory Hierarchies and Interconnects) - PADAPS (Second Workshop on Parallel and Distributed Agent-Based Simulations) - PROPER (7th Workshop on Productivity and Performance) - Resilience (7th Workshop on Resiliency in High Performance Computing with Clusters, Clouds, and Grids) - REPPAR (First International Workshop on Reproducibility in Parallel Computing) - ROME (Second Workshop on Runtime and Operating Systems for the Many Core Era) - SPPEXA (Workshop on Software for Exascale Computing) - TASUS (First Workshop on Techniques and Applications for Sustainable Ultrascale Computing Systems) - UCHPC (7th Workshop on Un Conventional High Performance Computing) and VHPC (9th Workshop on Virtualization in High-Performance Cloud Computing. - Del 8805 - Lecture Notes in Computer Science
Euro-Par 2014: Parallel Processing Workshops
Euro-Par 2014 International Workshops, Porto, Portugal, August 25-26, 2014, Revised Selected Papers, Part I
Häftad, Engelska, 2014576 kr
Skickas inom 10-15 vardagar
The two volumes LNCS 8805 and 8806 constitute the thoroughly refereed post-conference proceedings of 18 workshops held at the 20th International Conference on Parallel Computing, Euro-Par 2014, in Porto, Portugal, in August 2014. The 100 revised full papers presented were carefully reviewed and selected from 173 submissions. The volumes include papers from the following workshops: APCI&E (First Workshop on Applications of Parallel Computation in Industry and Engineering - BigDataCloud (Third Workshop on Big Data Management in Clouds) - DIHC (Second Workshop on Dependability and Interoperability in Heterogeneous Clouds) - FedICI (Second Workshop on Federative and Interoperable Cloud Infrastructures) - Hetero Par (12th International Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms) - HiBB (5th Workshop on High Performance Bioinformatics and Biomedicine) - LSDVE (Second Workshop on Large Scale Distributed Virtual Environments on Clouds and P2P) - MuCoCoS (7th International Workshop on Multi-/Many-core Computing Systems) - OMHI (Third Workshop on On-chip Memory Hierarchies and Interconnects) - PADAPS (Second Workshop on Parallel and Distributed Agent-Based Simulations) - PROPER (7th Workshop on Productivity and Performance) - Resilience (7th Workshop on Resiliency in High Performance Computing with Clusters, Clouds, and Grids) - REPPAR (First International Workshop on Reproducibility in Parallel Computing) - ROME (Second Workshop on Runtime and Operating Systems for the Many Core Era) - SPPEXA (Workshop on Software for Exascale Computing) - TASUS (First Workshop on Techniques and Applications for Sustainable Ultrascale Computing Systems) - UCHPC (7th Workshop on Un Conventional High Performance Computing) and VHPC (9th Workshop on Virtualization in High-Performance Cloud Computing. - E-bokPDF, Engelska, 2014
739 kr
Läs direkt efter köp
The two volumes LNCS 8805 and 8806 constitute the thoroughly refereed post-conference proceedings of 18 workshops held at the 20th International Conference on Parallel Computing, Euro-Par 2014, in Porto, Portugal, in August 2014. The 100 revised full papers presented were carefully reviewed and selected from 173 submissions. The volumes include papers from the following workshops: APCI&E (First Workshop on Applications of Parallel Computation in Industry and Engineering - BigDataCloud (Third Workshop on Big Data Management in Clouds) - DIHC (Second Workshop on Dependability and Interoperability in Heterogeneous Clouds) - FedICI (Second Workshop on Federative and Interoperable Cloud Infrastructures) - Hetero Par (12th International Workshop on Algorithms, Models and Tools for Parallel Computing on Heterogeneous Platforms) - HiBB (5th Workshop on High Performance Bioinformatics and Biomedicine) - LSDVE (Second Workshop on Large Scale Distributed Virtual Environments on Clouds and P2P) - MuCoCoS (7th International Workshop on Multi-/Many-core Computing Systems) - OMHI (Third Workshop on On-chip Memory Hierarchies and Interconnects) - PADAPS (Second Workshop on Parallel and Distributed Agent-Based Simulations) - PROPER (7th Workshop on Productivity and Performance) - Resilience (7th Workshop on Resiliency in High Performance Computing with Clusters, Clouds, and Grids) - REPPAR (First International Workshop on Reproducibility in Parallel Computing) - ROME (Second Workshop on Runtime and Operating Systems for the Many Core Era) - SPPEXA (Workshop on Software for Exascale Computing) - TASUS (First Workshop on Techniques and Applications for Sustainable Ultrascale Computing Systems) - UCHPC (7th Workshop on Un Conventional High Performance Computing) and VHPC (9th Workshop on Virtualization in High-Performance Cloud Computing. - Del 10048 - Lecture Notes in Computer Science
Algorithms and Architectures for Parallel Processing
16th International Conference, ICA3PP 2016, Granada, Spain, December 14-16, 2016, Proceedings
Häftad, Engelska, 2016576 kr
Skickas inom 10-15 vardagar
This book constitutes the refereed proceedings of the 16th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2016, held in Granada, Spain, in December 2016.The 30 full papers and 22 short papers presented were carefully reviewed and selected from 117 submissions. They cover many dimensions of parallel algorithms and architectures, encompassing fundamental theoretical approaches, practical experimental projects, and commercial components and systems trying to push beyond the limits of existing technologies, including experimental efforts, innovative systems, and investigations that identify weaknesses in existing parallel processing technology. - E-bokPDF, Engelska, 2016
739 kr
Läs direkt efter köp
This book constitutes the refereed proceedings of the 16th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2016, held in Granada, Spain, in December 2016.
The 30 full papers and 22 short papers presented were carefully reviewed and selected from 117 submissions. They cover many dimensions of parallel algorithms and architectures, encompassing fundamental theoretical approaches, practical experimental projects, and commercial components and systems trying to push beyond the limits of existing technologies, including experimental efforts, innovative systems, and investigations that identify weaknesses in existing parallel processing technology.
- Del 10049 - Lecture Notes in Computer Science
Algorithms and Architectures for Parallel Processing
ICA3PP 2016 Collocated Workshops: SCDT, TAPEMS, BigTrust, UCER, DLMCS, Granada, Spain, December 14-16, 2016, Proceedings
Häftad, Engelska, 2016576 kr
Skickas inom 10-15 vardagar
This book constitutes the refereed workshop proceedings of the 16th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2016, held in Granada, Spain, in December 2016. The 30 full papers presented were carefully reviewed and selected from 58 submissions. They cover many dimensions of parallel algorithms and architectures, encompassing fundamental theoretical approaches, practical experimental projects, and commercial components and systems trying to push beyond the limits of existing technologies, including experimental efforts, innovative systems, and investigations that identify weaknesses in existing parallel processing technology. - E-bokPDF, Engelska, 2016
739 kr
Läs direkt efter köp
This book constitutes the refereed workshop proceedings of the 16th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2016, held in Granada, Spain, in December 2016. The 30 full papers presented were carefully reviewed and selected from 58 submissions. They cover many dimensions of parallel algorithms and architectures, encompassing fundamental theoretical approaches, practical experimental projects, and commercial components and systems trying to push beyond the limits of existing technologies, including experimental efforts, innovative systems, and investigations that identify weaknesses in existing parallel processing technology.
