Kaushik Kumar – författare

Sustainable Engineering Products and Manufacturing Technologies provides the reader with a detailed look at the latest research into technologies that reduce the environmental impacts of manufacturing. All points where engineering decisions can influence the environmental sustainability of a product are examined, including the sourcing of non-toxic, sustainable raw materials, how to choose manufacturing processes that use energy responsibly and minimize waste, and how to design products to maximize reusability and recyclability. The subject of environmental regulation is also addressed, with references to both the US and EU and the future direction of legislation.

Finally, sustainability factors are investigated alongside other product considerations, such as quality, price, manufacturability and functionality, to help readers design processes and products that are economically viable and environmentally friendly.

Helps readers integrate product sustainability alongside functionality, manufacturability and cost Describes the latest technologies for energy efficient and low carbon manufacturing Discusses relevant environmental regulations around the globe and speculates on future directions

Sustainable Engineering Products and Manufacturing Technologies provides the reader with a detailed look at the latest research into technologies that reduce the environmental impacts of manufacturing. All points where engineering decisions can influence the environmental sustainability of a product are examined, including the sourcing of non-toxic, sustainable raw materials, how to choose manufacturing processes that use energy responsibly and minimize waste, and how to design products to maximize reusability and recyclability. The subject of environmental regulation is also addressed, with references to both the US and EU and the future direction of legislation.Finally, sustainability factors are investigated alongside other product considerations, such as quality, price, manufacturability and functionality, to help readers design processes and products that are economically viable and environmentally friendly.- Helps readers integrate product sustainability alongside functionality, manufacturability and cost- Describes the latest technologies for energy efficient and low carbon manufacturing- Discusses relevant environmental regulations around the globe and speculates on future directions

Modern Manufacturing Processes draws on the latest international research on traditional and non-traditional practices, to provide valuable advice on the digitization and automation of the manufacturing industry. In addition to providing technical details for the correct implementation of the latest tools and practices, the impacts on productivity and design quality are also examined.

The thorough classification of manufacturing processes will help readers to decide which technology is most effective for their requirements, and comparisons between modern and traditional methods will clarify the case for upgrading. This comprehensive assessment of technologies will include additive manufacturing, and industry 4.0, as well as hybrid methods where exceptional results have been gained through the use of traditional technology.

This collection of work by academics at the cutting edge of manufacturing research will help readers from a range of backgrounds to understand and apply these new technologies.

Explains how the correct implementation of modern manufacturing processes can help a factory gain the characteristics of an industry 4.0 business Explores what the main technical and business drivers for new manufacturing processes are today Provides detailed classifications and comparisons of traditional, non-traditional, and hybrid manufacturing processes

Sustainable Manufacturing and Design draws together research and practices from a wide range of disciplines to help engineers design more environmentally sustainable products. Sustainable manufacturing requires that the entire manufacturing enterprise adopts sustainability goals at a system-level in decision-making, hence the scope of this book covers a wide range of viewpoints in response. Advice on recyclability, zero landfill design, sustainable quality systems, and product take-back issues make this a highly usable guide to the challenges facing engineering designers today. Contributions from around the globe are included, helping to form an international view of an issue that requires a global response. Addresses methods to reduce energy and material waste through manufacturing design Helps to troubleshoot manufacturability problems that can arise in sustainable design Includes coverage of the legislative, cultural and social impacts of sustainable manufacturing, promoting a holistic view of the subject

Sustainable Manufacturing and Design draws together research and practices from a wide range of disciplines to help engineers design more environmentally sustainable products. Sustainable manufacturing requires that the entire manufacturing enterprise adopts sustainability goals at a system-level in decision-making, hence the scope of this book covers a wide range of viewpoints in response. Advice on recyclability, zero landfill design, sustainable quality systems, and product take-back issues make this a highly usable guide to the challenges facing engineering designers today. Contributions from around the globe are included, helping to form an international view of an issue that requires a global response.- Addresses methods to reduce energy and material waste through manufacturing design- Helps to troubleshoot manufacturability problems that can arise in sustainable design- Includes coverage of the legislative, cultural and social impacts of sustainable manufacturing, promoting a holistic view of the subject

Modern Manufacturing Processes draws on the latest international research on traditional and non-traditional practices, to provide valuable advice on the digitization and automation of the manufacturing industry. In addition to providing technical details for the correct implementation of the latest tools and practices, the impacts on productivity and design quality are also examined.The thorough classification of manufacturing processes will help readers to decide which technology is most effective for their requirements, and comparisons between modern and traditional methods will clarify the case for upgrading. This comprehensive assessment of technologies will include additive manufacturing, and industry 4.0, as well as hybrid methods where exceptional results have been gained through the use of traditional technology.This collection of work by academics at the cutting edge of manufacturing research will help readers from a range of backgrounds to understand and apply these new technologies.- Explains how the correct implementation of modern manufacturing processes can help a factory gain the characteristics of an industry 4.0 business- Explores what the main technical and business drivers for new manufacturing processes are today- Provides detailed classifications and comparisons of traditional, non-traditional, and hybrid manufacturing processes

Computational Intelligence in Manufacturing addresses applications of AI, machine learning and other innovative computational techniques across the manufacturing supply chain. The rapid development of smart or digital manufacturing known as Industry 4.0 has swiftly provided a large number of opportunities for product and manufacturing process improvement. Selecting the appropriate technologies and combining them successfully is a challenge this book helps readers overcome . It explains how to prepare different manufacturing cells for flexibility and enhanced productivity with better supply chain management, e.g., calibrating design machine tools for automation and agility.

Computational intelligence applications for non-conventional manufacturing processes such as ECM and EDM are covered alongside recent advances in traditional processes like casting, welding and metal forming. As well as describing specific applications, this practical guide also explains the computational intelligence paradigm for enhanced supply chain management.

Includes hot topics such as augmented and virtual reality applications in manufacturing Provides details of computational techniques, such as nature inspired algorithms for manufacturing process modeling Gives practical technical advice on how to calibrate processes and tools to work efficiently in an industry 4.0 system

Computational Intelligence in Manufacturing addresses applications of AI, machine learning and other innovative computational techniques across the manufacturing supply chain. The rapid development of smart or digital manufacturing known as Industry 4.0 has swiftly provided a large number of opportunities for product and manufacturing process improvement. Selecting the appropriate technologies and combining them successfully is a challenge this book helps readers overcome . It explains how to prepare different manufacturing cells for flexibility and enhanced productivity with better supply chain management, e.g., calibrating design machine tools for automation and agility.Computational intelligence applications for non-conventional manufacturing processes such as ECM and EDM are covered alongside recent advances in traditional processes like casting, welding and metal forming. As well as describing specific applications, this practical guide also explains the computational intelligence paradigm for enhanced supply chain management.- Includes hot topics such as augmented and virtual reality applications in manufacturing- Provides details of computational techniques, such as nature inspired algorithms for manufacturing process modeling- Gives practical technical advice on how to calibrate processes and tools to work efficiently in an industry 4.0 system

This book covers the issues related to optimization of engineering and management problems using soft computing techniques with an industrial outlook. It covers a broad area related to real life complex decision making problems using a heuristics approach. It also explores a wide perspective and future directions in industrial engineering research on a global platform/scenario. The book highlights the concept of optimization, presents various soft computing techniques, offers sample problems, and discusses related software programs complete with illustrations.Features Explains the concept of optimization and relevance to soft computing techniques towards optimal solution in engineering and management Presents various soft computing techniques Offers problems and their optimization using various soft computing techniques Discusses related software programs, with illustrations Provides a step-by-step tutorial on how to handle relevant software for obtaining the optimal solution to various engineering problems

Recognized as a "Recommended" title by Choice for their April 2021 issue.Choice is a publishing unit at the Association of College & Research Libraries (ACR&L), a division of the American Library Association. Choice has been the acknowledged leader in the provision of objective, high-quality evaluations of nonfiction academic writing. Metaheuristic optimization is a higher-level procedure or heuristic designed to find, generate, or select a heuristic (partial search algorithm) that may provide a sufficiently good solution to an optimization problem, especially with incomplete or imperfect information or limited computation capacity. This is usually applied when two or more objectives are to be optimized simultaneously. This book is presented with two major objectives. Firstly, it features chapters by eminent researchers in the field providing the readers about the current status of the subject. Secondly, algorithm-based optimization or advanced optimization techniques, which are applied to mostly non-engineering problems, are applied to engineering problems. This book will also serve as an aid to both research and industry. Usage of these methodologies would enable the improvement in engineering and manufacturing technology and support an organization in this era of low product life cycle. Features: Covers the application of recent and new algorithms Focuses on the development aspects such as including surrogate modeling, parallelization, game theory, and hybridization Presents the advances of engineering applications for both single-objective and multi-objective optimization problems Offers recent developments from a variety of engineering fields Discusses Optimization using Evolutionary Algorithms and Metaheuristics applications in engineering

Artificial Intelligence in Mechanical and Industrial Engineering offers a unified platform for the dissemination of basic and applied knowledge on the integration of artificial intelligence within the realm of mechanical and industrial engineering. The book covers the tools and information needed to build successful careers and a source of knowledge for those working with AI within these domains.The book offers a systematic approach to explicate fundamentals as well as recent advances. It incorporates various case studies for major topics as well as numerous examples. It will also include real-time intelligent automation and associated supporting methodologies and techniques, and cover decision-support systems, as well as applications of Chaos Theory and Fractals.The book will give scientists, researchers, instructors, students, and practitioners the tools and information needed to build successful careers and to be an impetus to advancements in next-generation mechanical and industrial engineering domains.

Nanomaterials and Nanocomposites: Characterization, Processing, and Applications discusses the most recent research in nanomaterials and nanocomposites for a range of applications as well as modern characterization tools and techniques. It deals with nanocomposites that are dispersed with nanosized particulates and carbon nanotubes in their matrices (polymer, metal, and ceramic). In addition, the work: Describes different nanomaterials, such as metal and metal oxides, clay and POSS, carbon nanotubes, cellulose, and biobased polymers in a structured manner Examines the processing of carbon nanotube-based nanocomposites, layered double hydroxides, and cellulose nanoparticles as functional fillers and reinforcement materials Covers size effect on thermal, mechanical, optical, magnetic, and electrical properties Details machining and joining aspects of nanocomposites Discusses the development of smart nanotextiles (intelligent textiles), self-cleaning glass, sensors, actuators, ferrofluids, and wear-resistant nanocoatings.This book enables an efficient comparison of properties and capabilities of these advanced materials, making it relevant for materials scientists and chemical engineers conducting academic research and industrial R&D into nanomaterial processing and applications.

This book provides a key understanding of CATIA which is a solid modeling software. By using screen shots of step-by-step training, the reader will obtain comprehensive knowledge of all tools provided in CATIA for use in a variety of engineering fields. The book introduces CATIA basics, covers part design, discusses sheet metal design, talks about assembly, presents drawings and shows modeling of an engineered component. The primary aim of this book is to assist in learning the use of CATIA software through examples taken from various areas of engineering. The content and treatment of the subject matter is most appropriate for university students studying engineering and practicing engineers who wish to learn the use of CATIA.

This book discusses the radical technological changes occurring due to Industry 4.0, with a focus on offering a better understanding of the Fourth Industrial Revolution. It also presents a detailed analysis of interdisciplinary knowledge, numerical modeling and simulation, and the application of cyber–physical systems, where information technology and physical devices create synergic systems leading to unprecedented efficiency. The book focuses on industrial applications of automation and robotics. It covers recent developments and trends occurring in both computer-aided manufacturing techniques, as well as computer-aided assembly techniques. Robots using embedded systems and artificial intelligence applications are also covered. Industrial Automation and Robotics: Techniques and Applications offers theoretical results, practical solutions, and guidelines that are valuable for both researchers and those working in the area of engineering.

With the growing environment and consciousness of "outcome-based education," the importance of this subject has increased manyfold. Unfortunately, there is little information on engineering pedagogy available outside of scattered journal articles, conference and symposium proceedings, workshop notes, and government and company reports. This book overcomes these difficulties by presenting, in a single volume, many of the recent advances in the field of engineering pedagogy and its recent developments.Engineering Pedagogy Towards Outcome-Based Education provides a systematic approach to explicit fundamentals as well as recent advances in the area. It incorporates various case studies for major topics as well as numerous academic examples. Each chapter contains many state-of-the-art techniques required for practical engineering applications.This book serves as a useful source of information for practicing academicians and specialists as well as academic institutions working on the subject.

With the growing environment and consciousness of "outcome-based education," the importance of this subject has increased manyfold. Unfortunately, there is little information on engineering pedagogy available outside of scattered journal articles, conference and symposium proceedings, workshop notes, and government and company reports. This book overcomes these difficulties by presenting, in a single volume, many of the recent advances in the field of engineering pedagogy and its recent developments.Engineering Pedagogy Towards Outcome-Based Education provides a systematic approach to explicit fundamentals as well as recent advances in the area. It incorporates various case studies for major topics as well as numerous academic examples. Each chapter contains many state-of-the-art techniques required for practical engineering applications.This book serves as a useful source of information for practicing academicians and specialists as well as academic institutions working on the subject.

This book discusses the radical technological changes occurring due to Industry 4.0, with a focus on offering a better understanding of the Fourth Industrial Revolution. It also presents a detailed analysis of interdisciplinary knowledge, numerical modeling and simulation, and the application of cyber–physical systems, where information technology and physical devices create synergic systems leading to unprecedented efficiency. The book focuses on industrial applications of automation and robotics. It covers recent developments and trends occurring in both computer-aided manufacturing techniques, as well as computer-aided assembly techniques. Robots using embedded systems and artificial intelligence applications are also covered. Industrial Automation and Robotics: Techniques and Applications offers theoretical results, practical solutions, and guidelines that are valuable for both researchers and those working in the area of engineering.

This book provides a key understanding of CATIA which is a solid modeling software. By using screen shots of step-by-step training, the reader will obtain comprehensive knowledge of all tools provided in CATIA for use in a variety of engineering fields. The book introduces CATIA basics, covers part design, discusses sheet metal design, talks about assembly, presents drawings and shows modeling of an engineered component. The primary aim of this book is to assist in learning the use of CATIA software through examples taken from various areas of engineering. The content and treatment of the subject matter is most appropriate for university students studying engineering and practicing engineers who wish to learn the use of CATIA.

Nanomaterials and Nanocomposites: Characterization, Processing, and Applications discusses the most recent research in nanomaterials and nanocomposites for a range of applications as well as modern characterization tools and techniques. It deals with nanocomposites that are dispersed with nanosized particulates and carbon nanotubes in their matrices (polymer, metal, and ceramic). In addition, the work: Describes different nanomaterials, such as metal and metal oxides, clay and POSS, carbon nanotubes, cellulose, and biobased polymers in a structured manner Examines the processing of carbon nanotube-based nanocomposites, layered double hydroxides, and cellulose nanoparticles as functional fillers and reinforcement materials Covers size effect on thermal, mechanical, optical, magnetic, and electrical properties Details machining and joining aspects of nanocomposites Discusses the development of smart nanotextiles (intelligent textiles), self-cleaning glass, sensors, actuators, ferrofluids, and wear-resistant nanocoatings.This book enables an efficient comparison of properties and capabilities of these advanced materials, making it relevant for materials scientists and chemical engineers conducting academic research and industrial R&D into nanomaterial processing and applications.

Metaheuristic optimization is a higher-level procedure or heuristic designed to find, generate, or select a heuristic (partial search algorithm) that may provide a sufficiently good solution to an optimization problem, especially with incomplete or imperfect information or limited computation capacity. This is usually applied when two or more objectives are to be optimized simultaneously. This book is presented with two major objectives. Firstly, it features chapters by eminent researchers in the field providing the readers about the current status of the subject. Secondly, algorithm-based optimization or advanced optimization techniques, which are applied to mostly non-engineering problems, are applied to engineering problems. This book will also serve as an aid to both research and industry. Usage of these methodologies would enable the improvement in engineering and manufacturing technology and support an organization in this era of low product life cycle. Features: Covers the application of recent and new algorithms Focuses on the development aspects such as including surrogate modeling, parallelization, game theory, and hybridization Presents the advances of engineering applications for both single-objective and multi-objective optimization problems Offers recent developments from a variety of engineering fields Discusses Optimization using Evolutionary Algorithms and Metaheuristics applications in engineering

Manufacturing, like other industries, is rising to the challenges imposed by aggressive consumer demands and the need for cost-effective processing that delivers quality in the fastest possible time. Fierce competition means that keeping abreast of new developments and applications in technology is essential if companies are to meet demands profitably and keep ahead of competitors. This book investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products using the I40 (industry 4.0)-enabling technologies. This book will also provide case studies covering modeling, simulation, and optimization. eBook includes color figures. Discusses how the advancement of data communication and storage through the Internet of Things (IoT) opens the possibilities of connecting sensors, robots, and devices Sheds light on how the human role in industry is decreasing due to the development of connected manufacturing floors, allowing them to take more control over the manufacturing processes, decisions, and even maintenance Covers the benefits from exploiting digital manufacturing, manufacturing enterprises, and what they expect to achieve Explains the important roles that modeling, simulation, and optimization play Investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products exploiting the I40 (industry 4.0)-enabling technologies

This book covers the issues related to optimization of engineering and management problems using soft computing techniques with an industrial outlook. It covers a broad area related to real life complex decision making problems using a heuristics approach. It also explores a wide perspective and future directions in industrial engineering research on a global platform/scenario. The book highlights the concept of optimization, presents various soft computing techniques, offers sample problems, and discusses related software programs complete with illustrations.Features Explains the concept of optimization and relevance to soft computing techniques towards optimal solution in engineering and management Presents various soft computing techniques Offers problems and their optimization using various soft computing techniques Discusses related software programs, with illustrations Provides a step-by-step tutorial on how to handle relevant software for obtaining the optimal solution to various engineering problems

This book covers the issues related to optimization of engineering and management problems using soft computing techniques with an industrial outlook. It covers a broad area related to real life complex decision making problems using a heuristics approach. It also explores a wide perspective and future directions in industrial engineering research on a global platform/scenario. The book highlights the concept of optimization, presents various soft computing techniques, offers sample problems, and discusses related software programs complete with illustrations.

Features

Explains the concept of optimization and relevance to soft computing techniques towards optimal solution in engineering and management Presents various soft computing techniques Offers problems and their optimization using various soft computing techniques Discusses related software programs, with illustrations Provides a step-by-step tutorial on how to handle relevant software for obtaining the optimal solution to various engineering problems

This book covers the issues related to optimization of engineering and management problems using soft computing techniques with an industrial outlook. It covers a broad area related to real life complex decision making problems using a heuristics approach. It also explores a wide perspective and future directions in industrial engineering research on a global platform/scenario. The book highlights the concept of optimization, presents various soft computing techniques, offers sample problems, and discusses related software programs complete with illustrations.

Features

Explains the concept of optimization and relevance to soft computing techniques towards optimal solution in engineering and management Presents various soft computing techniques Offers problems and their optimization using various soft computing techniques Discusses related software programs, with illustrations Provides a step-by-step tutorial on how to handle relevant software for obtaining the optimal solution to various engineering problems

Manufacturing, like other industries, is rising to the challenges imposed by aggressive consumer demands and the need for cost-effective processing that delivers quality in the fastest possible time. Fierce competition means that keeping abreast of new developments and applications in technology is essential if companies are to meet demands profitably and keep ahead of competitors. This book investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products using the I40 (industry 4.0)-enabling technologies. This book will also provide case studies covering modeling, simulation, and optimization.

eBook includes color figures.

Discusses how the advancement of data communication and storage through the Internet of Things (IoT) opens the possibilities of connecting sensors, robots, and devices

Sheds light on how the human role in industry is decreasing due to the development of connected manufacturing floors, allowing them to take more control over the manufacturing processes, decisions, and even maintenance

Covers the benefits from exploiting digital manufacturing, manufacturing enterprises, and what they expect to achieve

Explains the important roles that modeling, simulation, and optimization play

Investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products exploiting the I40 (industry 4.0)-enabling technologies

Manufacturing, like other industries, is rising to the challenges imposed by aggressive consumer demands and the need for cost-effective processing that delivers quality in the fastest possible time. Fierce competition means that keeping abreast of new developments and applications in technology is essential if companies are to meet demands profitably and keep ahead of competitors. This book investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products using the I40 (industry 4.0)-enabling technologies. This book will also provide case studies covering modeling, simulation, and optimization.

eBook includes color figures.

Discusses how the advancement of data communication and storage through the Internet of Things (IoT) opens the possibilities of connecting sensors, robots, and devices

Sheds light on how the human role in industry is decreasing due to the development of connected manufacturing floors, allowing them to take more control over the manufacturing processes, decisions, and even maintenance

Covers the benefits from exploiting digital manufacturing, manufacturing enterprises, and what they expect to achieve

Explains the important roles that modeling, simulation, and optimization play

Investigates the design and management of digital manufacturing and assembly systems for an efficient, flexible, and modular production of customized products exploiting the I40 (industry 4.0)-enabling technologies

Nanomaterials and Nanocomposites: Characterization, Processing, and Applications discusses the most recent research in nanomaterials and nanocomposites for a range of applications as well as modern characterization tools and techniques. It deals with nanocomposites that are dispersed with nanosized particulates and carbon nanotubes in their matrices (polymer, metal, and ceramic). In addition, the work:

Describes different nanomaterials, such as metal and metal oxides, clay and POSS, carbon nanotubes, cellulose, and biobased polymers in a structured manner

Examines the processing of carbon nanotube-based nanocomposites, layered double hydroxides, and cellulose nanoparticles as functional fillers and reinforcement materials

Covers size effect on thermal, mechanical, optical, magnetic, and electrical properties

Details machining and joining aspects of nanocomposites

Discusses the development of smart nanotextiles (intelligent textiles), self-cleaning glass, sensors, actuators, ferrofluids, and wear-resistant nanocoatings.

This book enables an efficient comparison of properties and capabilities of these advanced materials, making it relevant for materials scientists and chemical engineers conducting academic research and industrial R&D into nanomaterial processing and applications.

Nanomaterials and Nanocomposites: Characterization, Processing, and Applications discusses the most recent research in nanomaterials and nanocomposites for a range of applications as well as modern characterization tools and techniques. It deals with nanocomposites that are dispersed with nanosized particulates and carbon nanotubes in their matrices (polymer, metal, and ceramic). In addition, the work:

Describes different nanomaterials, such as metal and metal oxides, clay and POSS, carbon nanotubes, cellulose, and biobased polymers in a structured manner

Examines the processing of carbon nanotube-based nanocomposites, layered double hydroxides, and cellulose nanoparticles as functional fillers and reinforcement materials

Covers size effect on thermal, mechanical, optical, magnetic, and electrical properties

Details machining and joining aspects of nanocomposites

Discusses the development of smart nanotextiles (intelligent textiles), self-cleaning glass, sensors, actuators, ferrofluids, and wear-resistant nanocoatings.

This book enables an efficient comparison of properties and capabilities of these advanced materials, making it relevant for materials scientists and chemical engineers conducting academic research and industrial R&D into nanomaterial processing and applications.