K.L. Mittal – författare

Developments in Surface Contamination and Cleaning: Applications of Cleaning Techniques, Volume Eleven, part of the Developments in Surface Contamination and Cleaning series, provides a guide to recent advances in the application of cleaning techniques for the removal of surface contamination in various industries, such as aerospace, automotive, biomedical, defense, energy, manufacturing, microelectronics, optics and xerography. The material in this new edition compiles cleaning applications into one easy reference that has been fully updated to incorporate new applications and techniques. Taken as a whole, the series forms a unique reference for professionals and academics working in the area of surface contamination and cleaning.

Presents the latest reviewed technical information on precision cleaning applications as written by established experts in the field Provides a single source on the applications of innovative precision cleaning techniques for a wide variety of industries Serves as a guide to the selection of precision cleaning techniques for specific applications

Developments in Surface Contamination and Cleaning: Applications of Cleaning Techniques, Volume Eleven, part of the Developments in Surface Contamination and Cleaning series, provides a guide to recent advances in the application of cleaning techniques for the removal of surface contamination in various industries, such as aerospace, automotive, biomedical, defense, energy, manufacturing, microelectronics, optics and xerography. The material in this new edition compiles cleaning applications into one easy reference that has been fully updated to incorporate new applications and techniques. Taken as a whole, the series forms a unique reference for professionals and academics working in the area of surface contamination and cleaning.- Presents the latest reviewed technical information on precision cleaning applications as written by established experts in the field- Provides a single source on the applications of innovative precision cleaning techniques for a wide variety of industries- Serves as a guide to the selection of precision cleaning techniques for specific applications

Developments in Surface Contamination and Cleaning: Methods for Assessment and Verification of Cleanliness of Surfaces and Characterization of Surface Contaminants, Volume Twelve, the latest release in the Developments in Surface Contamination and Cleaning series, provides best practices on determining surface cleanliness. Chapters include an introduction to the nature and size of particles, a discussion of cleanliness levels, detailed coverage of measurement methods, characterization methods and analytical methods for evaluating surfaces, and an overview of analysis methods for various contaminants. As a whole, the series creates a unique and comprehensive knowledge base for those in research and development in a variety of industries.

Manufacturing, quality control and procurement specification professionals in the aerospace, automotive, biomedical, defense, energy, manufacturing, microelectronics, optics and xerography industries will find this book to be very helpful. In addition, researchers in an academic setting will also find these volumes excellent source books.

Includes an extensive listing, with a description of available methods for the assessment of surface cleanliness Provides a single source of information on methods for verification of surface cleanliness Serves as a guide to the selection, assessment and verification of methods for specific applications

Developments in Surface Contamination and Cleaning: Methods for Assessment and Verification of Cleanliness of Surfaces and Characterization of Surface Contaminants, Volume Twelve, the latest release in the Developments in Surface Contamination and Cleaning series, provides best practices on determining surface cleanliness. Chapters include an introduction to the nature and size of particles, a discussion of cleanliness levels, detailed coverage of measurement methods, characterization methods and analytical methods for evaluating surfaces, and an overview of analysis methods for various contaminants. As a whole, the series creates a unique and comprehensive knowledge base for those in research and development in a variety of industries.Manufacturing, quality control and procurement specification professionals in the aerospace, automotive, biomedical, defense, energy, manufacturing, microelectronics, optics and xerography industries will find this book to be very helpful. In addition, researchers in an academic setting will also find these volumes excellent source books.- Includes an extensive listing, with a description of available methods for the assessment of surface cleanliness- Provides a single source of information on methods for verification of surface cleanliness- Serves as a guide to the selection, assessment and verification of methods for specific applications

This and its companion Volumes 2 and 3 document the proceed- ings of the 4th International Symposium on Surfactants in Solution held in Lund, Sweden, June 27-July 2, 1982. This biennial event was christened as the 4th Symposium as this was a continuation of ear- li er conferences dealing with surfactants held in 1976 (Albany) under the title "Micellization, Solubilization, and Microemulsions"; in 1978 (Knoxville) under the title "Solution Chemistry of Surfac- tants"; and in 1980 (Potsdam) where it was dubbed as "Solution Be- bavior of Surfactants: Theoretical and Applied Aspects:' The Pl02 3 ceedings of all these symposia have been properly chronicled. ' , The Lund Symposium was bi lIed as "Surfactants in Solution" as both the aggregation and adsorption aspects of surfactants were covered, and furthermore we were interested in a general title which could be used for future conferences in this series.As these biennial events bave become a weIl recognized forum for bringing together researchers with varied interests in the arena of surfactants, so it is amply vindicated to continue these, and the next meeting is planned for July 9-13, 1984 in Bordeaux, France under the cochair- manship of K. L. Mittal and P. Bothorel. The venue for 1986 is still open, although India, inter alia, is a good possibility. Apropos, we would be delighted to entertain suggestions regarding where and when these biennial symposia should be held in the future and you may direct your response to Kk~.

This and its companion Volume 2 chronicle the proceedings of the First Technical Conference on Polyimides: Synthesis, Char­ acterization and Applications held under the auspices of the Mid­ Hudson Section of the Society of Plastics Engineers at Ellenville, New York, November 10-12, 1982. In the last decade or so there has been an accelerated interest in the use of polyimides for a variety of applications in a number of widely differing technologies. The applications of polyimides range from aerospace to microelectronics to medical field, and this is attributed to the fact that polyimides offer certain desirable traits, inter alia, high temperature stability. Polyimides are used as organic insulators, as adhesives, as coat­ ings, in composites, just to name a few of their uses. Even a casual search of the literature will underscore the importance of this class of materials and the high tempo of R&D activity taking place in the area of polyimides. So it was deemed that a conference on polyimides was both timely and needed. This conference was designed to provide a forum for discussion of various ramifications of polyimides, to bring together scientists and technologists interested in all aspects of polyimides and thus to provide an opportunity for cross-pollination of ideas, and to highlight areas which needed further and intensi­ fied R&D efforts. If the comments from the attendees are a baro­ meter of the success of a conference, then this event was highly successful and fulfilled amply its stated objectives.

Proceedings of a technical conference held in Ellenville, New York, November 10-12, 1982

This volume chronicles the proceedings of the Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the auspices of the Dielectrics and Insulation Division of the Electrochemical Society in Chicago, October 10-12, 1988. This was the premier symposium on this topic and if the comments from the attendees are any barometer of the success of a symposium then it was a grand success. Concomitantly, it has been decided to hold it on a regular basis (at intervals of 18 months) and the second event in this series is planned as a part of the Electrochemical Society meeting in Montreal, Canada, May 6-10, 1990. Metallized plastics find a legion of applications ranging from mundane to very sophisticated. A complete catalog of the various technological applications of metallized plastics will be prohibitively long, so here some eclectic examples should suffice to show why there is such high tempo of R&D activity in the arena of metallized plastics, and all signals indicate that this high tempo will continue unabated. For example, polymeric films are metallized for packaging (food and other products) purposes, and the applications of metallized plastics in the automotive industry are quite obvious. In the field of microelectronics and computer technology, insulators are metallized for interconnection and other functional purposes. Also plastics are metallized to provide electromagnetic shielding.

This book chronicles the proceedings of the Second Symposium on Particles in Gases and Liquids: Detection, Characterization and Control held as a part of the 20th Annual Fine Particle Society meeting in Boston, August 21-25, 1989. As this second symposium was as successful as the prior one, so we have decided to hold symposia on this topic on a regular (biennial) basis and the third symposium in this series is scheduled to be held at the 22nd Annual Meeting of the Fine Particle Society in San Jose, California, July 29-August 2, 1991. l As pointed out in the Preface to the prior volume in this series that recently there has been tremendous concern about yield losses due to unwanted particles, and these unwelcome particles can originate from a legion of sources, including process gases and liquids. Also all signals indicate that in the future manufacture of sophisticated and sensitive microelectronic components (with shrinking dimensions) and other precision parts, the need for detection, characterization, analysis and control of smaller and smaller particles will be more intensified.

This volume documents the proceedings of the Second Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the aegis of the Dielectric Science and Technology Division of the Electrochemical Society in Montreal, Canada, May 7-10, 1990. The first symposium on this topic was held in Chicago, October 10-12, 1988 and the proceedings of l which have been chronicled in a hard-bound volume l As pointed out in the Preface to the proceedings of the first symposium the metallized plastics find scores of applications ranging from very mundane to very sophisticated. Even a cursory look at the literature will convince that this field has sprouted; and there is every reason to believe that with all the research and development activities taking place, new and exciting applications of metallized plastics will emerge. The program for the second symposium was very comprehensive as it included 46 papers covering many aspects of metallized plastics. This symposium was a testimonial to the brisk research activity and keen interest in the topic of metallized plastics. The success of this symposium reinforced our earlier belief that there was a definite need to hold symposia on this topic on a regular basis. Concomitantly, the third symposium in this vein was held in Phoenix, Arizona, October 13-18, 1991 and the fourth is planned for May 16-21, 1993 in Honolulu, Hawaii. As regards the present volume, it contains a total of 35 papers covering a variety of topics ranging from very fundamental to very applied.

This volume chronicles the proceedings of the Third Symposium on Particles on Surfaces : Detection, Adhesion and Removal held as a part of the 21st Annual Meeting of the Fine Particle Society in San Diego , California, August 21 - 25 , 1990 . The first two symposia i n t h i s series were held in 1986 and 1988 , respectively, and have been properly l documented ,2. Li ke its antecedent s the Third symposium was very well received, and the continuing success of these symposia reinforced our earlier belief that regular symposia on the topic of particles on surfaces were very much needed. Concomitantly, the fourth symposium in this series is planned in Las Vegas , July 13-17 , 199 2 . l As pointed out in the Preface to the earlier two volumes ,2, the topic of particles on surfaces is of tremendous interest and concern in a wide spectrum of technological areas . The objectives of the Third symposium were es s ent i a l ly the same as those of the earlier two and our intent her e was to provide an update on the research and development activities in the world of particles on surfaces . Apropos , there has been a deliberate attempt every time to s eek out new people to present their research results and we have been very succes s f ul in this mission.

This volume chronicles the proceedings of the 8th International Symposium on Surfactants in Solution (SIS) held in Gainesville, FL, June 10-15, 1990. This series of symposia have been smoothly running since 1976, but the appellation "Surfactants in Solution" was used for the first time in 1982 in Lund. Since then our logo "SIS" has become very familiar to everyone involved in surfactants. In Lund the meeting was billed as the Fourth International Symposium on Surfactants in Solution. Earlier three events were held under different rubrics, but proceedings of all these symposia, except the 7th SIS held in Ottawa in 1988, have been properly documented. As a matter of fact so far 10 volumes have appeared under the title "Surfactants in Solution". 1,2,3 The program for the 9th SIS was very comprehensive and many ramifications of surfactants were covered, and it was a veritable international event. It contained a total of 384 papers by 869 authors from practically every corner of our planet. Just the sheer number of papers is a testimonial to the high tempo of research and tremendous interest in this wonderful class of materials. As in the past, there were plenary lectures (5), invited talks (37), oral presentations (195) and poster presentations (147). The plenary lectures were given by Prof. J. Th. G. Overbeek, Prof. C. A. Bunton, Prof. H. Ti Tien and Dr. J. Swalen. The lecture by Prof. Overbeek, the doyen of surface and colloid science, was a real treat.

This volume chronicles the proceedings of the Third Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the auspices of the Dielectric Science and Technology Division of the Electrochemical Society in Phoenix, Arizona, October 13-18, 1991. This series of symposia to address the subject of metallized plastics was initiated in 1988 and the premier symposium was held in Chicago, October 10-12, 1988, followed by the second event in Montreal, Canada, May 7-10, 1990. The rroceedings of these two symposia have been properly documented ,2. The third symposium was a huge success like the previous two events, and all this is testimonial to the brisk interest and high tempo of R&D activity in the fie14 of metallized plastics. This further bolsters our earlier thinking that there was a conspicuous need to hold symposia on this topic on a regular basis and the fourth is planned for May 16-21, 1993 in Honolulu, Hawaii. The study of metallized plastics constitutes an important human endeavor l and as pointed out earlier there are myriad applications of metallized plastics ranging from very commonplace to exotic. Also a survey of the recent literature will reveal that both the fundamental and applied aspects of metallized plastics are being pursued with great vigor.

This book documents the proceedings of the Third Symposium on Particles in Gases and Liquids: Detection, Characterization and Control held as a part of the 22nd Annual Meeting of the Fine Particle Society in San Jose, California, July 29-August 2, 1991. This series of symposia was initiated in 1987 in light of the growing importance to eliminate particles from process gases and liquids. As pointed out in the Preface to antecedent volumes in this series that particles in process gases and liquids could cause significant yield losses in precision manufacturing and concomitantly there has been heightened interest in understanding the behavior of particles in gases and liquids and devising ways to eliminate, or at least reduce substantially, these particles. The concern about particles in gases and liquids has been there for qui.te some time in the microelectronics arena, but there are other areas also where particles are of significant concern, e.g. in operation theatres in hospitals, food and beverage industry, and pharmaceutical manufacturing. This symposium basically had the same objectives as its predecessors, but to provide an update on the R&D activity taking place in the arena of particle detection, characterization and control. The printed program comprised a total of 28 papers dealing with variegated aspects of particles in gases and liquids. There were brisk and lively discussions and the attendees offered many positive comments, which goes to show that it was a well-received and needed symposium.

The premier symposium on Surfactants in Tribology, held in Seoul in 2006, was an enormously successful event that generated a high level of interest in the topic, leading to the publication of the first volume in this series in 2008. The tremendous response was echoed at the follow-up symposium in Berlin that same year, and leading researchers, many of whom participated in the second event, were invited to submit chapters for Surfactants in Tribology, Volume Two. Reflecting the cumulative wisdom of a contingent of researchers, this text explores all-new topics critical to the future of tribology.Topics discussed in this second volume include: Properties of silane, thio, phthalocyanine and phospholipid films, membranes, grafts, and SAMs on gold, silica, and graphite substratesWater/oil emulsions used as oil-well drilling fluidsProperties of organized surfactant assemblies and aqueous solutions of alkyl polyglucosidesSurfactants as demulsifiers in enhanced crude oil production from old wells Oil/water emulsions with biobased surfactantsThe synthesis of novel biobased materialsProperties of biobased lubricants and surfactantsModeling and statistical predictive methods in the development of biobased lubricantsThe fundamentals of surface chemistry at tribological interfacesThe role of surface science in magnetic recording tribologyAntiwear and friction modifier compounds for automotive applicationsSurfactants as antimicrobial agents in lubricants Tribological phenomena are of significant importance in a host of industries ranging from simple products to high-tech devices. This volume and its predecessor reflect the sage contributions of a cadre of experts who report on current possibilities and future potential for harnessing sur

Surfactants play a variety of critical roles in tribology. In addition to controlling friction and wear, they also allow for control of a wide range of properties of lubricants, such as emulsification/demulsification, bioresistance, oxidation resistance, and rust/corrosion prevention. This book explains recent advances in the role of surfactants within the purview of tribology, with an emphasis on product development. Includes Theoretical, Experimental, and Technological Advances Providing a unique exploration of the nexus between surfactants and tribology, this text represents the cumulative expertise of leading scientists and technologists engaged in the study of surfactants in variegated tribological phenomena. Organized thematically for easy reference, the volume covers— · Fundamentals of surfactants · Tribological aspects of micro- and nanodevices, including micro-patterns of two-dimensional asperity arrays, MEMS, NEMS, and magnetic recording devices · Self-assembled monolayers and ultra-thin films relevant to tribological phenomena, including aspects of organosilane monolayers, ultrathin self-assembled films, super-hydrophobic films, MoDTC/ZDDP tribofilms, and surfactant-coated copper nanoparticles · Polymeric and biobased surfactants, covering various tribological aspects related to polymeric gels, elastomers sliding against hydrophilic and hydrophobic surfaces, agriculture-based amphiphiles, vegetable oils, and biobased greases · Surfactant adsorption and aggregation relevant to tribological phenomena, such as the design of surfactants for lubrication, aqueous non-ionic surfactant-based lubricants, adsorption and aggregation kinetics, surfactant and polymer nanostructures, a

Offering the latest research and developments in the understanding of surfactant behavior in solutions, this reference investigates the role and dynamics of surfactants and their solution properties in the formulation of paints, printing inks, paper coatings, pharmaceuticals, personal care products, cosmetics, liquid detergents, and lubricants. Exploring the science behind techniques from oil recovery to drug delivery, the book covers surfactant stabilized particles; solid particles at liquid interfaces; nanocapsules; aggregation behavior of surfactants; micellar catalysis; vesicles and liposomes; the clouding phenomena; viscoelasticity of micellar solutions; and more.

This volume presents the acomplishments of over 85 internationlly renowned scientists whose work was influenced by Professor Wasan's groundbreaking research on interfacial phenomena at The Illinois Institute of Technology, Chicago.

Demonstrating methods for overcoming stability issues in paints, wax dispersions, cosmetics, food products, and other industrial applications, this reference probes theoretical and practical issues surrounding microemulsion science and technology. Featuring the work of 51 international experts and containing almost 1000 instructive tables, equations, and illustrations, this book reviews the performance of, and prospects for, experimental methods such as X-ray diffraction, transmission electron microscopy (TEM), light scattering, small angle neutron scattering, viscosimetry, and nuclear magnetic resonance (NMR) to characterize various aspects of the dispersed phase of microemulsions.

Presents the state of the art in improving bond strength between different materials for many manufacturing processes. The text explores up-to-date, high-quality adhesion technologies for a wide variety of materials, explaining current capabilities of adhesion promotion for both students and seasoned researchers. It reviews the suitable chemistry or morphology for enhanced adhesion to metal, plastic and wood surfaces.

Surfactants play a critical role in Tribology controlling friction, wear, and lubricant properties such as emulsification, demulsification, bioresistance, oxidation resistance, rust prevention and corrosion resistance. This is a critical topic for new materials and devices particularly those built at the nanoscale. This newest volume will address tribological properties of cutting fluids, lubricant performance related to steel surfaces, biolubricants, and novel materials and ways to reduce friction and wear. Scientists from industrial research and development (R&D) organizations and academic research teams in Asia, Europe, the Middle East and North America will participate in the work.

Sealing is an age-old problem that dates back to our earliest attempts to create a more comfortable living environment. Prehistoric people used natural sealants such as earth, loam, grass, and reeds to protect the interior of their homes against the weather. Today’s applications extend to a myriad of uses. The Handbook of Sealant Technology provides an in-depth examination of sealants, reviewing their historical developments and fundamentals, adhesion theories and properties, and today’s wide range of applications.Featuring contributions from international academic and industry experts, this comprehensive, illustrated reference explores: The history of sealants from the Stone Age to the presentThe testing and durability of sealants and sealed jointsThe use of organofunctional silanes in sealant technologyHot melt and intumescent sealantsUrethane waterproofing membrane systemsFoam back-up materialsSealants for use in construction, bridge expansion joints, and automotive electronicsFibrin sealants for biomedical applications As technology continues to develop, the potential for sealant use grows exponentially. This valuable reference guide provides a window on the past and offers insight into the extent of future possibilities in a host of industries.

Presents the state of the art in improving bond strength between different materials for many manufacturing processes. The text explores up-to-date, high-quality adhesion technologies for a wide variety of materials, explaining current capabilities of adhesion promotion for both students and seasoned researchers. It reviews the suitable chemistry or morphology for enhanced adhesion to metal, plastic and wood surfaces.

This volume presents the acomplishments of over 85 internationlly renowned scientists whose work was influenced by Professor Wasan's groundbreaking research on interfacial phenomena at The Illinois Institute of Technology, Chicago.

Offering the latest research and developments in the understanding of surfactant behavior in solutions, this reference investigates the role and dynamics of surfactants and their solution properties in the formulation of paints, printing inks, paper coatings, pharmaceuticals, personal care products, cosmetics, liquid detergents, and lubricants. Exploring the science behind techniques from oil recovery to drug delivery, the book covers surfactant stabilized particles; solid particles at liquid interfaces; nanocapsules; aggregation behavior of surfactants; micellar catalysis; vesicles and liposomes; the clouding phenomena; viscoelasticity of micellar solutions; and more.

Demonstrating methods for overcoming stability issues in paints, wax dispersions, cosmetics, food products, and other industrial applications, this reference probes theoretical and practical issues surrounding microemulsion science and technology. Featuring the work of 51 international experts and containing almost 1000 instructive tables, equations, and illustrations, this book reviews the performance of, and prospects for, experimental methods such as X-ray diffraction, transmission electron microscopy (TEM), light scattering, small angle neutron scattering, viscosimetry, and nuclear magnetic resonance (NMR) to characterize various aspects of the dispersed phase of microemulsions.

This work comprises the proceedings of the Fourth Symposium on Particles on Surfaces. Papers cover: adhesion-induced deformations of particles on surfaces; the use of atomic force microscopy in probing particle-particle adhesion; particle contamination in microelectronics, on spacecraft, and on optical surfaces; the role of air ionization in reducing surface contamination by particles in the cleanroom; abrasive blasting media for contamination-free deburring processes; and more.;The book is intended for physical, chemical, surface and colloid chemists, materials scientists; polymers, plastics, electrical and electronics, computer, chemical and mechanical engineers; and upper-level undergraduate and graduate students in these disciplines.