Lewin Edwards – författare

In this practical reference, popular author Lewin Edwards shows how to develop robust, dependable real-time systems for robotics and other control applications, using open-source tools. It demonstrates efficient and low-cost embedded hardware and software design techniques, based on Linux as the development platform and operating system and the Atmel AVR as the primary microcontroller. The book provides comprehensive examples of sensor, actuator and control applications and circuits, along with source code for a number of projects. It walks the reader through the process of setting up the Linux-based controller, from creating a custom kernel to customizing the BIOS, to implementing graphical control interfaces. Including detailed design information on:· ESBUS PC-host interface· Host-module communications protocol· A speed-controlled DC motor with tach feedback and thermal cut-off· A stepper motor controller· A two-axis attitude sensor using a MEMS accelerometer· Infrared remote control in Linux using LIRC· Machine vision using Video4Linux- The first-ever book on using open source technology for robotics design!- Covers hot topics such as GPS navigation, 3-D sensing, and machine vision, all using a Linux platform!

In this practical guide, experienced embedded engineer Lewin Edwards demonstrates faster, lower-cost methods for developing high-end embedded systems. With today''s tight schedules and lower budgets, embedded designers are under greater pressure to deliver prototypes and system designs faster and cheaper. Edwards demonstrates how the use of the right tools and operating systems can make seemingly impossible deadlines possible.Designer''s Guide to Embedded Systems Development shares many advanced, in-the-trenches design secrets to help engineers achieve better performance on the job. In particular, it covers many of the newer design tools supported by the GPL (GNU Public License) system. Code examples are given to provide concrete illustrations of tasks described in the text. The general procedures are applicable to many possible projects based on any 16/32-bit microcontroller. The book covers choosing the right architecture and development hardware to fit the project; choosing an operating system and developing a toolchain; evaluating software licenses and how they affect a project; step-by-step building instructions for gcc, binutils, gdb and newlib for the ARM7 core used in the case study project; prototyping techniques using a custom printed circuit board; debugging tips; and portability considerations.- A wealth of practical tips, tricks and techniques- Design better, faster and more cost-effectively

In this new, highly practical guide, expert embedded designer and manager Lewin Edwards answers the question, "How do I become an embedded engineer? Embedded professionals agree that there is a treacherous gap between graduating from school and becoming an effective engineer in the workplace, and that there are few resources available for newbies to turn to when in need of advice and direction. This book provides that much-needed guidance for engineers fresh out of school, and for the thousands of experienced engineers now migrating into the popular embedded arena.This book helps new embedded engineers to get ahead quickly by preparing them for the technical and professional challenges they will face. Detailed instructions on how to achieve successful designs using a broad spectrum of different microcontrollers and scripting languages are provided. The author shares insights from a lifetime of experience spent in-the-trenches, covering everything from small vs. large companies, and consultancy work vs. salaried positions, to which types of training will prove to be the most lucrative investments. This book provides an expert''s authoritative answers to questions that pop up constantly on Usenet newsgroups and in break rooms all over the world.* An approachable, friendly introduction to working in the world of embedded design* Full of design examples using the most common languages and hardware that new embedded engineers will be likely to use every day* Answers important basic questions on which are the best products to learn, trainings to get, and kinds of companies to work for

The Newnes Know It All Series takes the best of what our authors have written to create hard-working desk references that will be an engineer''s first port of call for key information, design techniques and rules of thumb. Guaranteed not to gather dust on a shelf!Circuit design using microcontrollers is both a science and an art. This book covers it all. It details all of the essential theory and facts to help an engineer design a robust embedded system. Processors, memory, and the hot topic of interconnects (I/O) are completely covered. Our authors bring a wealth of experience and ideas; this is a must-own book for any embedded designer.*A 360 degree view from best-selling authors including Jack Ganssle, Tammy Noergard, and Fred Eady*Key facts, techniques, and applications fully detailed*The ultimate hard-working desk reference: all the essential information, techniques, and tricks of the trade in one volume

In this practical guide, experienced embedded engineer Lewin Edwards demonstrates faster, lower-cost methods for developing high-end embedded systems. With today's tight schedules and lower budgets, embedded designers are under greater pressure to deliver prototypes and system designs faster and cheaper. Edwards demonstrates how the use of the right tools and operating systems can make seemingly impossible deadlines possible.

Designer's Guide to Embedded Systems Development shares many advanced, in-the-trenches design secrets to help engineers achieve better performance on the job. In particular, it covers many of the newer design tools supported by the GPL (GNU Public License) system. Code examples are given to provide concrete illustrations of tasks described in the text. The general procedures are applicable to many possible projects based on any 16/32-bit microcontroller. The book covers choosing the right architecture and development hardware to fit the project; choosing an operating system and developing a toolchain; evaluating software licenses and how they affect a project; step-by-step building instructions for gcc, binutils, gdb and newlib for the ARM7 core used in the case study project; prototyping techniques using a custom printed circuit board; debugging tips; and portability considerations.

A wealth of practical tips, tricks and techniques Design better, faster and more cost-effectively

In this practical reference, popular author Lewin Edwards shows how to develop robust, dependable real-time systems for robotics and other control applications, using open-source tools. It demonstrates efficient and low-cost embedded hardware and software design techniques, based on Linux as the development platform and operating system and the Atmel AVR as the primary microcontroller. The book provides comprehensive examples of sensor, actuator and control applications and circuits, along with source code for a number of projects. It walks the reader through the process of setting up the Linux-based controller, from creating a custom kernel to customizing the BIOS, to implementing graphical control interfaces. Including detailed design information on:� ESBUS PC-host interface� Host-module communications protocol� A speed-controlled DC motor with tach feedback and thermal cut-off� A stepper motor controller� A two-axis attitude sensor using a MEMS accelerometer� Infrared remote control in Linux using LIRC� Machine vision using Video4Linux The first-ever book on using open source technology for robotics design! Covers hot topics such as GPS navigation, 3-D sensing, and machine vision, all using a Linux platform!