S. K. Sundaram – författare

Papers from the symposium at the 102nd Annual Meeting of The American Ceramic Society, April 29-May 3, 2000, Missouri and the 103rd Annual Meeting, April 22-25, 2001, Indiana.

Composed from two symposia conducted at the 2001 Annual Meeting of The American Ceramic Society, this new volume details the advances in the state of knowledge in nuclear and waste materials science and technology. Highlighted are areas of rapid change such as in the application, development, and testing of ceramics and glasses in the nuclear and waste industries.

As companies begin to focus on ¿green ceramics¿ and the manufacturing of environmentally friendly products, the development of innovative processing approaches and novel environmental treatment technologies soon follows. These are being developed to address more stringent regulations and to obtain an improved scientific understanding of the industrial processes and treatment technologies.

This seventh volume in the series addresses current nuclear and environmental problems and provides solutions for them. It is an excellent resource for researchers and scientists involved in the ceramic and nuclear industries.

roceedings of the symposium held at the 103rd Annual Meeting of The American Ceramic Society, April 22-25, 2001, in Indiana; Ceramic Transactions, Volume 132.

Proceedings of the symposium held at the 104th Annual Meeting of The American Ceramic Society, April 28-May1, 2002 in Missouri; Ceramic Transactions, Volume 143.

The 73rd Glass Problem Conference is organized according to the following themes: Glass Melting, Melting, Raw Materials, Batching, and Recycling, Coatings, Strengthening, and Other Topics, Refractories, and Process Control & Modeling

This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

This volume is part of the Ceramic Engineering and Science Proceeding (CESP) series. This series contains a collection of papers dealing with issues in both traditional ceramics (i.e., glass, whitewares, refractories, and porcelain enamel) and advanced ceramics. Topics covered in the area of advanced ceramic include bioceramics, nanomaterials, composites, solid oxide fuel cells, mechanical properties and structural design, advanced ceramic coatings, ceramic armor, porous ceramics, and more.

The 78th Glass Problem Conference (GPC) including the 11th Advances in Fusion and Processing of Glass (AFPG) Symposium is organized by the Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 and The Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The Program Director was S. K. Sundaram, Inamori Professor of Materials Science and Engineering, Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802. The Conference Director was Robert Weisenburger Lipetz, Executive Director, Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. Donna Banks of the GMIC coordinated the events and provided support. The Conference started with a half-day plenary session followed by technical sessions. The themes and chairs of four half-day technical sessions were as follows:

Modeling, Sensors, and Furnace DesignJames Uhlik, Toledo Engineering Company, Inc., Toledo, OH and Michelle Korwin-Edson, Owen Corning Composite Solutions, Granville, OH

Refractories & TestingLaura Lowe – North American Refractory Company, Pittsburgh, PA, Larry McCloskey – Anchor Acquisition, LLC, Lancaster, OH, and Laura Lowe – North American Refractory Company, Pittsburgh, PA and Larry McCloskey – Anchor Acquisition, LLC, Lancaster, OH CombustionGlenn Neff, Glass Service USA, Inc., Stuart, FL and Uyi Iyoha, Praxair Inc., Tonawanda, NY

Environmental & SafetyPhil Tucker, Johns Manville, Denver, CO and Elmer Sperry, Libbey Glass, Toledo, OH

The 78th Glass Problem Conference (GPC) including the 11th Advances in Fusion and Processing of Glass (AFPG) Symposium is organized by the Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 and The Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The Program Director was S. K. Sundaram, Inamori Professor of Materials Science and Engineering, Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802. The Conference Director was Robert Weisenburger Lipetz, Executive Director, Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. Donna Banks of the GMIC coordinated the events and provided support. The Conference started with a half-day plenary session followed by technical sessions. The themes and chairs of four half-day technical sessions were as follows:

Modeling, Sensors, and Furnace DesignJames Uhlik, Toledo Engineering Company, Inc., Toledo, OH and Michelle Korwin-Edson, Owen Corning Composite Solutions, Granville, OH

Refractories & TestingLaura Lowe – North American Refractory Company, Pittsburgh, PA, Larry McCloskey – Anchor Acquisition, LLC, Lancaster, OH, and Laura Lowe – North American Refractory Company, Pittsburgh, PA and Larry McCloskey – Anchor Acquisition, LLC, Lancaster, OH CombustionGlenn Neff, Glass Service USA, Inc., Stuart, FL and Uyi Iyoha, Praxair Inc., Tonawanda, NY

Environmental & SafetyPhil Tucker, Johns Manville, Denver, CO and Elmer Sperry, Libbey Glass, Toledo, OH

The 80th Glass Problem Conference (GPC) was organized by the Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 and The Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The Program Director was S. K. Sundaram, Inamori Professor of Materials Science and Engineering, Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802. The Conference Director was Robert Weisenburger Lipetz, Executive Director, Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The GPC Advisory Board (AB) included the Program Director, the Conference Director, and several industry representatives. The Board assembled the technical program. Donna Banks of the GMIC coordinated the events and provided support. The Conference started with a half-day plenary session followed by technical sessions. The themes and chairs of four technical sessions were as follows:

Melting and CombustionUyi Iyoha, Praxair, Inc., Peachtree City, GA, Jan Schep, Owens-Illinois, Inc., Perrysburg, OH, and Justin Wang, Guardian Industries, Auburn Hills, MI

Batch, Environmental, and ModelingPhil Tucker, Johns Manville, Littleton, CO and Chris Tournour, Corning Inc., Corning, NY

RefractoriesLarry McCloskey, Anchor Acquisition, LLC, Lancaster, OH and Eric Dirlam, Ardagh Group, Muncie, IN

Sensors and ControlAdam Polycn, Vitro Architectural Glass, Cheswick, PA and Glenn Neff, Glass Service USA, Inc., Stuart, FL

The 80th Glass Problem Conference (GPC) was organized by the Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802 and The Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The Program Director was S. K. Sundaram, Inamori Professor of Materials Science and Engineering, Kazuo Inamori School of Engineering, The New York State College of Ceramics, Alfred University, Alfred, NY 14802. The Conference Director was Robert Weisenburger Lipetz, Executive Director, Glass Manufacturing Industry Council (GMIC), Westerville, OH 43082. The GPC Advisory Board (AB) included the Program Director, the Conference Director, and several industry representatives. The Board assembled the technical program. Donna Banks of the GMIC coordinated the events and provided support. The Conference started with a half-day plenary session followed by technical sessions. The themes and chairs of four technical sessions were as follows:

Melting and CombustionUyi Iyoha, Praxair, Inc., Peachtree City, GA, Jan Schep, Owens-Illinois, Inc., Perrysburg, OH, and Justin Wang, Guardian Industries, Auburn Hills, MI

Batch, Environmental, and ModelingPhil Tucker, Johns Manville, Littleton, CO and Chris Tournour, Corning Inc., Corning, NY

RefractoriesLarry McCloskey, Anchor Acquisition, LLC, Lancaster, OH and Eric Dirlam, Ardagh Group, Muncie, IN

Sensors and ControlAdam Polycn, Vitro Architectural Glass, Cheswick, PA and Glenn Neff, Glass Service USA, Inc., Stuart, FL