Computer Science and Operations Research continue to have a synergistic relationship and this book represents the results of the cross-fertilization between OR/MS and CS/AI. It is this interface of OR/CS that makes possible advances that could not have been achieved in isolation. Taken collectively, these articles are indicative of the state of the art in the interface between OR/MS and CS/AI and of the high-caliber research being conducted by members of the INFORMS Computing Society.

Telecommunications Modeling, Policy, and Technology Examines the newer and emerging models of telecommunications technology that play instrumental roles in providing international economic and societal interconnectivity. Advancing technology in the field imposes the need to develop new models to solve complex planning and decision making problems. The global, national, and local societal impact of the technology necessitates careful analysis of telecommunications policy at all of these levels. The book explores natural output of the new technical developments and applications with selective chapter treatment on novel business models to fill the emerging technical and business needs.

MICROWAVE INTEGRATED CIRCUIT COMPONENTS DESIGN THROUGH MATLAB®

This book teaches the student community microwave integrated circuit component design through MATLAB®, helping the reader to become conversant in using codes and, thereafter, commercial software for verification purposes only. Microwave circuit theory and its comparisons, transmission line networks, S-parameters, ABCD parameters, basic design parameters of planar transmission lines (striplines, microstrips, slot lines, coplanar waveguides, finlines), filter theory, Smith chart, inverted Smith chart, stability circles, noise figure circles and microwave components, are thoroughly explained in the book. The chapters are planned in such a way that readers get a thorough understanding to ensure expertise in design. Aimed at senior undergraduates, graduates and researchers in electrical engineering, electromagnetics, microwave circuit design and communications engineering, this book:

• Explains basic tools for design and analysis of microwave circuits such as the Smith chart and network parameters

• Gives the advantage of realizing the output without wiring the circuit by simulating through MATLAB code

• Compares distributed theory with network theory

• Includes microwave components, filters and amplifiers

S. Raghavan was a Senior Professor (HAG) in the Department of Electronics and Communication Engineering, National Institute of Technology (NIT), Trichy, India and has 39 years of teaching and research experience at the Institute. His interests include: microwave integrated circuits, RF MEMS, Bio MEMS, metamaterial, frequency selective surfaces (FSS), substrate integrated waveguides (SIW), biomedical engineering and microwave engineering. He has established state-of-the-art MICs and microwave research laboratories at NIT, Trichy with funding from the Indian government. He is a Fellow/Senior Member in more than 24 professional societies including: IEEE (MTT, EMBS, APS), IETE, IEI, CSI, TSI, ISSS, ILA and ISOI. He is twice a recipient of the Best Teacher Award, and has received the Life Time Achievement Award, Distinguished Professor of Microwave Integrated Circuit Award and Best Researcher Award.

MICROWAVE INTEGRATED CIRCUIT COMPONENTS DESIGN THROUGH MATLAB®

This book teaches the student community microwave integrated circuit component design through MATLAB®, helping the reader to become conversant in using codes and, thereafter, commercial software for verification purposes only. Microwave circuit theory and its comparisons, transmission line networks, S-parameters, ABCD parameters, basic design parameters of planar transmission lines (striplines, microstrips, slot lines, coplanar waveguides, finlines), filter theory, Smith chart, inverted Smith chart, stability circles, noise figure circles and microwave components, are thoroughly explained in the book. The chapters are planned in such a way that readers get a thorough understanding to ensure expertise in design. Aimed at senior undergraduates, graduates and researchers in electrical engineering, electromagnetics, microwave circuit design and communications engineering, this book:

• Explains basic tools for design and analysis of microwave circuits such as the Smith chart and network parameters

• Gives the advantage of realizing the output without wiring the circuit by simulating through MATLAB code

• Compares distributed theory with network theory

• Includes microwave components, filters and amplifiers

S. Raghavan was a Senior Professor (HAG) in the Department of Electronics and Communication Engineering, National Institute of Technology (NIT), Trichy, India and has 39 years of teaching and research experience at the Institute. His interests include: microwave integrated circuits, RF MEMS, Bio MEMS, metamaterial, frequency selective surfaces (FSS), substrate integrated waveguides (SIW), biomedical engineering and microwave engineering. He has established state-of-the-art MICs and microwave research laboratories at NIT, Trichy with funding from the Indian government. He is a Fellow/Senior Member in more than 24 professional societies including: IEEE (MTT, EMBS, APS), IETE, IEI, CSI, TSI, ISSS, ILA and ISOI. He is twice a recipient of the Best Teacher Award, and has received the Life Time Achievement Award, Distinguished Professor of Microwave Integrated Circuit Award and Best Researcher Award.

-The first three chapters of the book deal with the design of wireless networks, including UMTS and Ad-Hoc networks. -Chapters 4-6 deal with the optimal design of telecommunications networks. Techniques used for network design range from genetic algorithms to combinatorial optimization heuristics. -Chapters 7-10 analyze traffic flow in telecommunications networks, focusing on optimizing traffic load distribution and the scheduling of switches under multi-media streams and heavy traffic. -Chapters 11-14 deal with telecommunications network management, examining bandwidth provisioning, admission control, queue management, dynamic routing, and feedback regulation in order to ensure that the network performance is optimized. -Chapters 15-16 deal with the construction of topologies and allocation of bandwidth to ensure quality-of-service.

Computer Science and Operations Research continue to have a synergistic relationship and this book represents the results of the cross-fertilization between OR/MS and CS/AI. It is this interface of OR/CS that makes possible advances that could not have been achieved in isolation. Taken collectively, these articles are indicative of the state of the art in the interface between OR/MS and CS/AI and of the high-caliber research being conducted by members of the INFORMS Computing Society.

Telecommunications Modeling, Policy, and Technology Examines the newer and emerging models of telecommunications technology that play instrumental roles in providing international economic and societal interconnectivity. Advancing technology in the field imposes the need to develop new models to solve complex planning and decision making problems. The global, national, and local societal impact of the technology necessitates careful analysis of telecommunications policy at all of these levels. The book explores natural output of the new technical developments and applications with selective chapter treatment on novel business models to fill the emerging technical and business needs.

MICROWAVE INTEGRATED CIRCUIT COMPONENTS DESIGN THROUGH MATLAB®

This book teaches the student community microwave integrated circuit component design through MATLAB®, helping the reader to become conversant in using codes and, thereafter, commercial software for verification purposes only. Microwave circuit theory and its comparisons, transmission line networks, S-parameters, ABCD parameters, basic design parameters of planar transmission lines (striplines, microstrips, slot lines, coplanar waveguides, finlines), filter theory, Smith chart, inverted Smith chart, stability circles, noise figure circles and microwave components, are thoroughly explained in the book. The chapters are planned in such a way that readers get a thorough understanding to ensure expertise in design. Aimed at senior undergraduates, graduates and researchers in electrical engineering, electromagnetics, microwave circuit design and communications engineering, this book:

• Explains basic tools for design and analysis of microwave circuits such as the Smith chart and network parameters

• Gives the advantage of realizing the output without wiring the circuit by simulating through MATLAB code

• Compares distributed theory with network theory

• Includes microwave components, filters and amplifiers

S. Raghavan was a Senior Professor (HAG) in the Department of Electronics and Communication Engineering, National Institute of Technology (NIT), Trichy, India and has 39 years of teaching and research experience at the Institute. His interests include: microwave integrated circuits, RF MEMS, Bio MEMS, metamaterial, frequency selective surfaces (FSS), substrate integrated waveguides (SIW), biomedical engineering and microwave engineering. He has established state-of-the-art MICs and microwave research laboratories at NIT, Trichy with funding from the Indian government. He is a Fellow/Senior Member in more than 24 professional societies including: IEEE (MTT, EMBS, APS), IETE, IEI, CSI, TSI, ISSS, ILA and ISOI. He is twice a recipient of the Best Teacher Award, and has received the Life Time Achievement Award, Distinguished Professor of Microwave Integrated Circuit Award and Best Researcher Award.

MICROWAVE INTEGRATED CIRCUIT COMPONENTS DESIGN THROUGH MATLAB®

This book teaches the student community microwave integrated circuit component design through MATLAB®, helping the reader to become conversant in using codes and, thereafter, commercial software for verification purposes only. Microwave circuit theory and its comparisons, transmission line networks, S-parameters, ABCD parameters, basic design parameters of planar transmission lines (striplines, microstrips, slot lines, coplanar waveguides, finlines), filter theory, Smith chart, inverted Smith chart, stability circles, noise figure circles and microwave components, are thoroughly explained in the book. The chapters are planned in such a way that readers get a thorough understanding to ensure expertise in design. Aimed at senior undergraduates, graduates and researchers in electrical engineering, electromagnetics, microwave circuit design and communications engineering, this book:

• Explains basic tools for design and analysis of microwave circuits such as the Smith chart and network parameters

• Gives the advantage of realizing the output without wiring the circuit by simulating through MATLAB code

• Compares distributed theory with network theory

• Includes microwave components, filters and amplifiers

S. Raghavan was a Senior Professor (HAG) in the Department of Electronics and Communication Engineering, National Institute of Technology (NIT), Trichy, India and has 39 years of teaching and research experience at the Institute. His interests include: microwave integrated circuits, RF MEMS, Bio MEMS, metamaterial, frequency selective surfaces (FSS), substrate integrated waveguides (SIW), biomedical engineering and microwave engineering. He has established state-of-the-art MICs and microwave research laboratories at NIT, Trichy with funding from the Indian government. He is a Fellow/Senior Member in more than 24 professional societies including: IEEE (MTT, EMBS, APS), IETE, IEI, CSI, TSI, ISSS, ILA and ISOI. He is twice a recipient of the Best Teacher Award, and has received the Life Time Achievement Award, Distinguished Professor of Microwave Integrated Circuit Award and Best Researcher Award.

-The first three chapters of the book deal with the design of wireless networks, including UMTS and Ad-Hoc networks. -Chapters 4-6 deal with the optimal design of telecommunications networks. Techniques used for network design range from genetic algorithms to combinatorial optimization heuristics. -Chapters 7-10 analyze traffic flow in telecommunications networks, focusing on optimizing traffic load distribution and the scheduling of switches under multi-media streams and heavy traffic. -Chapters 11-14 deal with telecommunications network management, examining bandwidth provisioning, admission control, queue management, dynamic routing, and feedback regulation in order to ensure that the network performance is optimized. -Chapters 15-16 deal with the construction of topologies and allocation of bandwidth to ensure quality-of-service.