Tom Proulx – författare

Dynamic Behavior of Materials, Volume 1: Proceedings of the 2010 Annual Conference on Experimental and Applied Mechanics, the first volume of six from the Conference, brings together 71 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Materials Science, including papers on Composite Materials, Dynamic Failure and Fracture, Dynamic Materials Response, Novel Testing Techniques, Low Impedance Materials, Metallic Materials, Response of Brittle Materials, Time Dependent Materials, High Strain Rate Testing of Biological and Soft Materials, Shock and High Pressure Response, Energetic Materials, Optical Techniques for Imaging High Strain Rate Material Response, and Modeling of Dynamic Response.

This the second volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 40 chapters on Microelectromechanical Systems and Nanotechnology. It presents early findings from experimental and computational investigations on MEMS and Nanotechnology including contributions on Nanomechanical Standards, Magneto-mechanical MEMS Sensors, Piezoelectric MEMS for Energy Harvesting, and Linear and Nonlinear Mass Sensing.

Modal Analysis Topics Volume 3. Proceedings of the 29th IMAC, A Conference and Exposition on Structural Dynamics, 2011, the third volume of six from the Conference, brings together over 30 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics.

Advanced Aerospace Applications, Volume 1. Proceedings of the 29th IMAC, A Conference and Exposition on Structural Dynamics, 2011, the first volume of six from the Conference, brings together 32 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on Aeroelasticity, Ground Testing, Dynamic Testing of Aerospace Structures, and Random Vibration.

Linking Models and Experiments, Volume 2. Proceedings of the 29th IMAC, A Conference and Exposition on Structural Dynamics, 2011, the second volume of six from the Conference, brings together 33 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on Finite Element Techniques, Model Updating, Experimental Dynamics Substructuring, Model Validation, and Uncertainty Quantification.

Civil Engineering Topics, Volume 4 Proceedings of the 29th IMAC, A Conference and Exposition on Structural Dynamics, 2011, the fourth volume of six from the Conference, brings together 35 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Civil Engineering, including Operational Modal Analysis, Dynamic Behaviors and Structural Health Monitoring.

Rotating Machinery, Structural Health Monitoring, Shock and Vibration, Volume 5 Proceedings of the 29th IMAC, A Conference and Exposition on Structural Dynamics, 2011, the fifth volume of six from the Conference, brings together 35 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Rotating Machinery, Structural Health Monitoring, as well as Shock and Vibration, along with other structural engineering areas.

This the fifth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 25 chapters on Emerging Energy Systems. It presents early findings from experimental and computational investigations including Material State Changes in Heterogeneous Materials for Energy Systems, Characterization of Carbon Nanotube Foam for Improved Gas Storage Capability, Thermoresponsive Microcapsules for Autonomic Lithium-ion Battery Shutdown, Service Life Prediction of Seal in PEM Fuel Cells, and Assessing Durability of Elastomeric Seals for Fuel Cell Applications.

This the sixth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 128 chapters on Experimental and Applied Mechanics. It presents early findings from experimental and computational investigations including High Accuracy Optical Measurements of Surface Topography, Elastic Properties of Living Cells, Standards for Validating Stress Analyses by Integrating Simulation and Experimentation, Efficiency Enhancement of Dye-sensitized Solar Cell, and Blast Performance of Sandwich Composites With Functionally Graded Core.

This the third volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 56 chapters on Time-Dependent Constitutive Fracture and Failure. It presents early findings from experimental and computational investigations on Time Dependent Materials including contributions on Thermal and Mechanical Characterization,Coupled Experimental and Computational Analysis of Fracture Path Selection, Procedures for Mixed Mode Fracture Testing of Bonded Beams, and Experimental Study of Voids in High Strength Aluminum Alloys.

Sensors, Instrumentation and Special Topics, Volume 6. Proceedings of the 29th IMAC, A Conference and Exposition on Structural Dynamics, 2011, the sixth volume of six from the Conference, brings together 27 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on Structural Health Monitoring, High Intensity Noise Generation and other Special Topics.

This the fourth volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 58 chapters on Application of Imaging Techniques to Mechanics of Materials and Structure. It presents findings from experimental and computational investigations involving a range of imaging techniques including Recovery of 3D Stress Intensity Factors From Surface Full-field Measurements, Identification of Cohesive-zone Laws From Crack-tip Deformation Fields, Application of High Speed Digital Image Correlation for Vibration Mode Shape Analysis, Characterization of Aluminum Alloys Using a 3D Full Field Measurement, and Low Strain Rate Measurements on Explosives Using DIC.

The Collection embraces Structural Dynamics and Renewable Energy into more than 50 categories, including Shock and Vibration, Damping in Solids, Nonlinear Modeling, Structural Health Modeling, Structural Dynamics, and Rotating Machinery. This the first volume of the five-volume set brings together 34 chapters on Structural Dynamics and Renewable Energy.

This the second volume of five from the 28th IMAC on Structural Dynamics and Renewable Energy, 2010, bringing together 17 chapters on Applications of Non-Linear Dynamics. It presents early findings from experimental and computational investigations on Non-Linear Dynamics including studies on Dynamics of a System of Coupled Oscillators with Geometrically Nonlinear Damping, Assigning the Nonlinear Distortions of a Two-input Single-output System, A Multi-harmonic Approach to Updating Locally Nonlinear Structures, A Block Rocking on a Seesawing Foundation, and Enhanced Order Reduction of Forced Nonlinear Systems Using New Ritz Vectors.

This the fifth volume of five from the 28th IMAC on Structural Dynamics and Renewable Energy, 2010, brings together 19 chapters on the Dynamics of Bridges. It presents early findings from experimental as well as computational investigations on the Dynamics of Bridges, including studies on Modeling Environmental Effects on the Dynamic Characteristics of the Tamar Suspension, Structural Health Monitoring of Bridges, Structural Assessment of Damaged Bridges Using Ambient Vibration Testing, and Development of a Tamar Bridge Finite Element Model.

This the fourth volume of five from the 28th IMAC on Structural Dynamics and Renewable Energy, 2010, brings together 29 chapters on the Dynamics of Civil Structures. It presents early findings from experimental and computational investigations of Civil Structures, including studies such as Characterization of a Strongly Nonlinear Laboratory Benchmark System, A Non-destructive Technique for the Health Monitoring of Tie-rods in Ancient Buildings, Estimating Effective Prestress Force on Grouted Tendon by Impact Responses, Experimental Investigation of Dynamic Load Estimation Using Small-scale Testing, and Prediction of Prestress Force on Grouted Tendon by Experimental Modal Analysis.

This the fifth volume of five from the 28th IMAC on Structural Dynamics and Renewable Energy, 2010,, brings together 146 chapters on Structural Dynamics. It presents early findings from experimental and computational investigations of on a wide range of area within Structural Dynamics, including studies such as Simulation and Validation of ODS Measurements made Using a Continuous SLDV Method on a Beam Excited by a Pseudo Random Signal, Comparison of Image Based, Laser, and Accelerometer Measurements, Modal Parameter Estimation Using Acoustic Modal Analysis, Mitigation of Vortex-induced Vibrations in Long-span Bridges, and Vibration and Acoustic Analysis of Brake Pads for Quality Control.

Thermomechanics and Infra-Red Imaging represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011.  The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, and Engineering Applications of Residual Stress.

MEMS and Nanotechnology, Volume 4 represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011.  The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.

Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials; MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.

Dynamic Behavior of Materials represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011.  The full set of proceedings also includes volumes on Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.

Mechanics of Biological Systems and Materials represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference & Exposition on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011.  The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.

Experimental and Applied Mechanics represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011.  The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Challenges in Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.

Engineering Applications of Residual Stress represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011.  The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, and Thermomechanics and Infra-Red Imaging.

Optical Measurements, Modeling, and Metrology represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011.  The full set of proceedings also includes volumes on Dynamic Behavior of Materials, Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials; MEMS and Nanotechnology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.

Advanced Aerospace Applications, Volume 1. Proceedings of the 29th IMAC, A Conference and Exposition on Structural Dynamics, 2011, the first volume of six from the Conference, brings together 32 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics, including papers on Aeroelasticity, Ground Testing, Dynamic Testing of Aerospace Structures, and Random Vibration.

Dynamic Behavior of Materials, Volume 1: Proceedings of the 2010 Annual Conference on Experimental and Applied Mechanics, the first volume of six from the Conference, brings together 71 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Materials Science, including papers on Composite Materials, Dynamic Failure and Fracture, Dynamic Materials Response, Novel Testing Techniques, Low Impedance Materials, Metallic Materials, Response of Brittle Materials, Time Dependent Materials, High Strain Rate Testing of Biological and Soft Materials, Shock and High Pressure Response, Energetic Materials, Optical Techniques for Imaging High Strain Rate Material Response, and Modeling of Dynamic Response.

This the second volume of six from the Annual Conference of the Society for Experimental Mechanics, 2010, brings together 40 chapters on Microelectromechanical Systems and Nanotechnology. It presents early findings from experimental and computational investigations on MEMS and Nanotechnology including contributions on Nanomechanical Standards, Magneto-mechanical MEMS Sensors, Piezoelectric MEMS for Energy Harvesting, and Linear and Nonlinear Mass Sensing.

Modal Analysis Topics Volume 3. Proceedings of the 29th IMAC, A Conference and Exposition on Structural Dynamics, 2011, the third volume of six from the Conference, brings together over 30 contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Structural Dynamics.