Uday Shanker Dixit – författare
Visar alla böcker från författaren Uday Shanker Dixit. Handla med fri frakt och snabb leverans.
29 produkter
29 produkter
538 kr
Skickas inom 10-15 vardagar
Professionals as well as researchers can benefit from this comprehensive introduction into the topic of setup planning, which reflects the latest state of research and gives hands-on examples. Starting with a brief but thorough introduction, this book explains the significance of setup planning in process planning and includes a reflection on its external constraints. Step-by-step the different phases of setup planning are outlined and traditional as well as modern approaches, such as fuzzy logic based setup planning, on the solution of setup planning problems are presented. Three detailed examples of applications provide a clear and accessible insight into the up-to-date techniques and various approaches in setup planning.
1 494 kr
Skickas inom 10-15 vardagar
What is mechanical engineering? What a mechanical engineering does? How did the mechanical engineering change through ages? What is the future of mechanical engineering? This book answers these questions in a lucid manner. It also provides a brief chronological history of landmark events and answers questions such as: When was steam engine invented? Where was first CNC machine developed? When did the era of additive manufacturing start? When did the marriage of mechanical and electronics give birth to discipline of mechatronics? This book informs and create interest on mechanical engineering in the general public and particular in students. It also helps to sensitize the engineering fraternity about the historical aspects of engineering. At the same time, it provides a common sense knowledge of mechanical engineering in a handy manner.
1 494 kr
Skickas inom 10-15 vardagar
What is mechanical engineering? This book informs and create interest on mechanical engineering in the general public and particular in students. It also helps to sensitize the engineering fraternity about the historical aspects of engineering. At the same time, it provides a common sense knowledge of mechanical engineering in a handy manner.
Lasers Based Manufacturing
5th International and 26th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2014
Inbunden, Engelska, 2015
1 600 kr
Skickas inom 10-15 vardagar
This book presents selected research papers of the AIMTDR 2014 conference on application of laser technology for various manufacturing processes such as cutting, forming, welding, sintering, cladding and micro-machining. State-of-the-art of these technologies in terms of numerical modeling, experimental studies and industrial case studies are presented. This book will enrich the knowledge of budding technocrats, graduate students of mechanical and manufacturing engineering, and researchers working in this area.
Advances in Material Forming and Joining
5th International and 26th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2014
Inbunden, Engelska, 2015
1 600 kr
Skickas inom 10-15 vardagar
This edited book contains extended research papers from AIMTDR 2014. This includes recent research work in the fields of friction stir welding, sheet forming, joining and forming, modeling and simulation, efficient prediction strategies, micro-manufacturing, sustainable and green manufacturing issues etc. This will prove useful to students, researchers and practitioners in the field of materials forming and manufacturing.
Advances in Material Forming and Joining
5th International and 26th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2014
Häftad, Engelska, 2016
1 600 kr
Skickas inom 10-15 vardagar
This edited book contains extended research papers from AIMTDR 2014. This includes recent research work in the fields of friction stir welding, sheet forming, joining and forming, modeling and simulation, efficient prediction strategies, micro-manufacturing, sustainable and green manufacturing issues etc. This will prove useful to students, researchers and practitioners in the field of materials forming and manufacturing.
Lasers Based Manufacturing
5th International and 26th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2014
Häftad, Engelska, 2016
1 959 kr
Skickas inom 5-8 vardagar
This book presents selected research papers of the AIMTDR 2014 conference on application of laser technology for various manufacturing processes such as cutting, forming, welding, sintering, cladding and micro-machining. State-of-the-art of these technologies in terms of numerical modeling, experimental studies and industrial case studies are presented. This book will enrich the knowledge of budding technocrats, graduate students of mechanical and manufacturing engineering, and researchers working in this area.
Strengthening and Joining by Plastic Deformation
Select Papers from AIMTDR 2016
Inbunden, Engelska, 2018
1 600 kr
Skickas inom 10-15 vardagar
This book focuses on strengthening and joining materials by means of plastic deformation, gathering extended research papers presented at the AIMTDR 2016 conference. Plastic deformation is used in materials processing to improve the strength of the material. For example, the rod/screw used to connect the cooker handle to the main body has to be strong and sustainable; such rods can be strengthened by plastic deformation (using multi-stage forming operations etc.). Similarly, joining by means of plastic deformation is highly valuable since it avoids the material and environmental degradation often caused by fusion welding processes. The book discusses various processing techniques in which plastic deformation is used to strengthen materials – e.g. in equal channel angular extrusion, autofrettage etc., or to join materials without melting them – e.g. in friction stir processing, riveting etc. Offering an extensive guide, the book includes chapters on roll bonding, equal channel angular pressing, autofrettage, friction stir processing/welding, magnetic pulse welding, and riveting – processes used to strengthen and join a variety of materials for lightweight applications and sustainable manufacturing. The contents of this book will be useful to researchers and practitioners alike.
1 600 kr
Skickas inom 10-15 vardagar
This book mainly addresses the applications of lasers in the manufacture of various industrial components. The technologies presented here have scopes of application ranging from the macro to meso and micro level of components and features. This book includes chapters on the basic and advanced applications of lasers in the manufacturing domain. They present theoretical and practical aspects of laser technology for various applications such as laser-based machining, micro-scribing, texturing, machining of micro-sized channels; laser welding; laser-based correction of sheet metal, i.e. straightening; laser forming; and laser technology for 3-D printing. Lasers have various applications such as the production of powerful lights for illumination or decoration; measurement of velocity (transportation) and length; interferometry; printing; recording; communication; bio-medical instrumentation and pollution detection. A significant body of literature is available on the physics of lasers and types of lasers. However it has been noted there are a few books published on the “applications of lasers in manufacturing domain,” a gap that this book remedies. Gathering contributions by leading engineers and academicians in this area, it offers a valuable source of information for young scientists and research students.
Strengthening and Joining by Plastic Deformation
Select Papers from AIMTDR 2016
Häftad, Engelska, 2018
1 587 kr
Skickas inom 11-20 vardagar
This book focuses on strengthening and joining materials by means of plastic deformation, gathering extended research papers presented at the AIMTDR 2016 conference.
1 600 kr
Skickas inom 10-15 vardagar
This book mainly addresses the applications of lasers in the manufacture of various industrial components. However it has been noted there are a few books published on the “applications of lasers in manufacturing domain,” a gap that this book remedies.
Recent Advances in Manufacturing Processes and Systems
Select Proceedings of RAM 2021
Häftad, Engelska, 2022
1 813 kr
Skickas inom 10-15 vardagar
The topics covered include conventional and nonconventional manufacturing processes, micro and nano manufacturing processes, chemical and biochemical manufacturing, additive manufacturing, smart manufacturing, and sustainable and energy-efficient manufacturing.
Engineering Pedagogy
A Collection of Articles in Honor of Prof. Amitabha Ghosh
Inbunden, Engelska, 2023
1 801 kr
Skickas inom 5-8 vardagar
This book contains selected papers from the symposium on Engineering Pedagogy organised in honour of Professor Amitabha Ghosh and his Lecture Series on Evolution of Classical Mechanics.
653 kr
Skickas inom 5-8 vardagar
1 813 kr
Skickas inom 10-15 vardagar
This book contains selected papers from the symposium on Engineering Pedagogy organised in honour of Professor Amitabha Ghosh and his Lecture Series on Evolution of Classical Mechanics.
2 344 kr
Skickas inom 10-15 vardagar
This book is on various advanced, simple, and novel techniques being used and developed in the area of manufacturing processes. The factors are materials, manufacturing processes, material handling processes, skilled manpower, quality control technologies, effective communication, and use of artificial intelligence techniques.
634 kr
Skickas inom 5-8 vardagar
2 344 kr
Skickas inom 10-15 vardagar
This book is on various advanced, simple, and novel techniques being used and developed in the area of manufacturing processes. The factors are materials, manufacturing processes, material handling processes, skilled manpower, quality control technologies, effective communication, and use of artificial intelligence techniques.
Advances in Computational Methods in Manufacturing
Select Papers from ICCMM 2019
Inbunden, Engelska, 2019
1 600 kr
Skickas inom 10-15 vardagar
This volume presents a selection of papers from the 2nd International Conference on Computational Methods in Manufacturing (ICCMM 2019). Articles in this volume discuss both the development of new methods and the application and efficacy of existing computational methods in manufacturing sector.
Advances in Computational Methods in Manufacturing
Select Papers from ICCMM 2019
Häftad, Engelska, 2020
1 600 kr
Skickas inom 10-15 vardagar
This volume presents a selection of papers from the 2nd International Conference on Computational Methods in Manufacturing (ICCMM 2019). Articles in this volume discuss both the development of new methods and the application and efficacy of existing computational methods in manufacturing sector.
Advances in Laser and Arc Cladding Technologies
Select Proceedings of ALACT 2023
Inbunden, Engelska, 2025
2 117 kr
Skickas inom 5-8 vardagar
1 813 kr
Skickas inom 10-15 vardagar
This book features selected proceedings of the Ninth Research & Industrial Conclave (RIC 2024), held from August 9 to 11, 2024, under the theme “Integration’24.” It includes papers spanning a wide range of disciplines, including Civil, Mechanical, Electrical, Electronics, Computer, and Chemical Engineering. In today’s rapidly evolving technological landscape, the integration of diverse engineering domains is more important than ever, as traditional disciplinary boundaries continue to blur. The contributions in this volume emphasize the significance of sustainability and interdisciplinary research. This book serves as a valuable reference for students, researchers, and industry professionals seeking to stay informed about the latest advancements and trends in engineering and technology.
Del 431 - Lecture Notes in Civil Engineering
Recent Advances in Civil Engineering
Select Proceedings of ICSTE 2023
Inbunden, Engelska, 2023
2 344 kr
Skickas inom 10-15 vardagar
This book presents select proceedings of the International Conference on Science, Technology and Engineering (ICSTE 2023) related to recent advances in Civil Engineering.
Del 431 - Lecture Notes in Civil Engineering
Recent Advances in Civil Engineering
Select Proceedings of ICSTE 2023
Häftad, Engelska, 2024
2 344 kr
Skickas inom 10-15 vardagar
This book presents select proceedings of the International Conference on Science, Technology and Engineering (ICSTE 2023) related to recent advances in Civil Engineering.
Del 1071 - Lecture Notes in Electrical Engineering
Recent Advances in Electrical and Electronic Engineering
Select Proceedings of ICSTE 2023
Inbunden, Engelska, 2023
2 344 kr
Skickas inom 10-15 vardagar
This book presents select proceedings of the International Conference on Science, Technology and Engineering (ICSTE 2023) related to electrical and electronic engineering. Various topics covered include neural network classification, text detection from natural scene images, speech processing systems, Wi-Fi intrusion detection, machine learning, wireless sensor network, image retrieval, automatic speech recognition, device physics, power transfer, photovoltaics, antenna for ultra-wideband applications, electric vehicles, etc. The book is useful for researchers and professionals whose work involves electrical and electronics and computer science fields.
Del 1071 - Lecture Notes in Electrical Engineering
Recent Advances in Electrical and Electronic Engineering
Select Proceedings of ICSTE 2023
Häftad, Engelska, 2024
2 344 kr
Skickas inom 10-15 vardagar
This book presents select proceedings of the International Conference on Science, Technology and Engineering (ICSTE 2023) related to electrical and electronic engineering. Various topics covered include neural network classification, text detection from natural scene images, speech processing systems, Wi-Fi intrusion detection, machine learning, wireless sensor network, image retrieval, automatic speech recognition, device physics, power transfer, photovoltaics, antenna for ultra-wideband applications, electric vehicles, etc. The book is useful for researchers and professionals whose work involves electrical and electronics and computer science fields.
1 659 kr
Skickas inom 10-15 vardagar
The book provides an insight into various facets of teaching and learning methodologies assisted by the technological advancements. The primary goal is to share with the readers about different experiences of technical as well as non-technical institutes in teaching and learning methodologies for improving the existing procedures.
1 659 kr
Skickas inom 10-15 vardagar
The book provides an insight into various facets of teaching and learning methodologies assisted by the technological advancements. The primary goal is to share with the readers about different experiences of technical as well as non-technical institutes in teaching and learning methodologies for improving the existing procedures.
2 344 kr
Skickas inom 10-15 vardagar
The topics covered include micro-, nano-, and non-conventional machining, additive manufacturing, casting and forming, joining processes, vibrations and acoustics, materials and processing, product design and development, industrial automation, CAD/CAM and robotics, and sustainability in manufacturing.