Yanchun Zhou – författare

This compilation of proceedings covering the latest scientific and technological developments in design, development, and applications of engineering ceramics and composites provides a useful one-stop resource for understanding the most important issues in design, development, and applications of engineering ceramics and composites. Logically organized and carefully selected articles give insight into design, development, and applications of engineering ceramics and composites and incorporates the latest developments related to design, development, and applications of engineering ceramics and composites including developments in engineering ceramics, advanced ceramic coatings, and geopolymers.

Contributions from three Focused Sessions that were part of the 34th International Conference on Advanced Ceramics and Composites (ICACC), in Daytona Beach, FL, January 24-29, 2010 are presented in this volume. The broad range of topics is captured by the Focused Session titles, which are listed as follows: FS1 - Geopolymers and other Inorganic Polymers; FS3 - Computational Design, Modeling Simulation and Characterization of Ceramics and Composites; and FS4 - Nanolaminated Ternary Carbides and Nitrides (MAX Phases). The session on Geopolymers and other Inorganic Polymers continues to attract growing attention from international researchers (USA, Australia, France, Germany, Italy, Czech Republic, and Viet Nam) and it is encouraging to see the variety of established and new applications being found for these novel and potentially useful materials. The session organizer gratefully acknowledges the support of the US Air Force Office of Scientific Research (AFOSR) through Dr. Joan Fuller. The AFOSR has continuously supported these conferences since the first meeting in Nashville, TN in 2003.Focused Session 3 was dedicated to design, modeling, simulation and characterization of ceramics and composites. 27 technical papers were presented on prediction of crystal structure and phase stability, characterization of interfaces and grain boundaries at atomic scale, optimization of electrical, optical and mechanical properties, modeling of defects and related properties, design of materials and components at different length scales, application of novel computational methods for processing. Four of these papers are included in this issue of CESP.Focused Session 4 was dedicated to MAX phases - a class of ternary carbides and nitrides with nanolaminated structure and general formula Mn+1AXn (where M is an early transition metal, A is an A-group element from IIIA to VIA, X is either C or N, and n=1, 2, 3 …). The MAX phases have attracted recently a lot of attention because they possess unique combination of metallic- and ceramic-like properties. In all, 30 technical papers were presented during this session. Four of these papers are included in this issue.

With continued discoveries and innovations, the field of materials synthesis and processing remains as it has been for many decades, a vibrant and fertile area for research and development. It comes, therefore, as no surprise that every Pac Rim conference has had considerable emphasis on this topic with many symposia devoted to various aspects of this field.  This bundle represents selected papers based on presentations during the 8th Pacific Rim Conference on Ceramic and Glass Technology, held in Vancouver, British Columbia, May 31-June 5, 2009.

This book is a collection of papers from The American Ceramic Society's 35th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 23-28, 2011. This issue includes papers presented in the Advanced Ceramic Coatings for Structural, Environmental, and Functional Applications and Materials for Extreme Environments symposia on topics such as Coatings to Resist Wear, Erosion and Tribological Loadings; Environmental Barrier Coatings; Functionally Graded Coatings and Interfaces; Thermal Barrier Coatings; and Ultrahigh Temperature Ceramics and Nanolaminated Ternary Carbides and Nitrides (MAX Phases).

Exploring advanced ceramic coatings and ultra-high temperature ceramic materials, this issue brings readers up-to-date with important new and emerging findings, materials, and applications. The nineteen papers in this issue originate from two symposia and one focused session held in January 2012, during the 36th International Conference on Advanced Ceramics and Composites (ICACC). With contributions from leading ceramics and materials researchers from around the world, this issue explores the latest advances and key challenges in advanced thermal and environmental coating processing and characterizations, advanced wear corrosion-resistant, nanocomposite, and multi-functional coatings, thermal protection systems, and more.

The first comprehensive book to focus on ultra-high temperature ceramic materials in more than 20 yearsUltra-High Temperature Ceramics are a family of compounds that display an unusual combination of properties, including extremely high melting temperatures (>3000°C), high hardness, and good chemical stability and strength at high temperatures.  Typical UHTC materials are the carbides, nitrides, and borides of transition metals, but the Group IV compounds (Ti, Zr, Hf) plus TaC are generally considered to be the main focus of research due to the superior melting temperatures and stable high-melting temperature oxide that forms in situ. Rather than focusing on the latest scientific results, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications broadly and critically combines the historical aspects and the state-of-the-art on the processing, densification, properties, and performance of boride and carbide ceramics.In reviewing the historic studies and recent progress in the field, Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications provides: Original reviews of research conducted in the 1960s and 70sContent on electronic structure, synthesis, powder processing, densification, property measurement, and characterization of boride and carbide ceramics.Emphasis on materials for hypersonic aerospace applications such as wing leading edges and propulsion components for vehicles traveling faster than Mach 5Information on materials used in the extreme environments associated with high speed cutting tools and nuclear power generationContributions are based on presentations by leading research groups at the conference "Ultra-High Temperature Ceramics: Materials for Extreme Environment Applications II" held May 13-19, 2012 in Hernstein, Austria. Bringing together disparate researchers from academia, government, and industry in a singular forum, the meeting cultivated didactic discussions and efforts between bench researchers, designers and engineers in assaying results in a broader context and moving the technology forward toward near- and long-term use. This book is useful for furnace manufacturers, aerospace manufacturers that may be pursuing hypersonic technology, researchers studying any aspect of boride and carbide ceramics, and practitioners of high-temperature structural ceramics.

Ceramic Engineering and Science Proceedings Volume 34, Issue 10 - Developments in Strategic Materials and Computational Design IVA collection of 25 papers from The American Ceramic Society's 37th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 27-February 1, 2013. This issue includes papers presented in the Geopolymers and Chemically Bonded Ceramics (Focused Session 1); Thermal Management Materials andTechnologies (Focused Sessoin 2); and Materials for Extreme Environments: Ultrahigh Temperature Ceramics and Nano-laminated Ternary Carbides and Nitrides (MAX Phases) (Symposium 12).

This issue contains 31 papers from The American Ceramic Society's 38th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 26-31, 2014. This issue includes papers presented in the following Symposia and Focused Sessions: Symposium 2 – Advanced Ceramic Coatings for Structural, Environmental, and Functional Applications;  Symposium 10 – Virtual Materials (Computational) Design and Ceramic Genome; Symposium 11 – Advanced Materials and Innovative Processing Ideas for the Industrial Root Technology; Symposium 12 – Materials for Extreme Environments: Ultrahigh Temperature Ceramics and Nanolaminated Ternary Carbides and Nitrides; Focused Session 1 - Geopolymers and Chemically Bonded Ceramics; Focused Session 2 – Advanced Ceramic Materials and Processing for Photonics and Energy; Focused Session 3 – Rare Earth Oxides for Energy, Optical and Biomedical Applications, Focused Session 4 – Ion-Transport Membranes; 3rd Global Pacific Rim Engineering Ceramics Summit; and the 3rd Annual Global Young Investigator Forum

This issue contains 27 papers from The American Ceramic Society’s 40th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 24-29, 2016. This issue includes papers presented in the following Symposia and Focused Sessions: Symposium 2 – Advanced Ceramic Coatings for Structural, Environmental, and Functional Applications; Symposium 10 – Virtual Materials (Computational) Design and Ceramic Genome; Symposium 11 – Advanced Materials and Innovative Processing Ideas for the Industrial Root Technology; Symposium 12 – Materials for Extreme Environments: Ultrahigh Temperature Ceramics; and Emerging Technologies Symposium–Carbon Nanostructures; and Focused Session 1 - Geopolymers and Chemically Bonded Ceramics.

This proceedings contains a collection of 24 papers from The American Ceramic Society’s 41st  International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 22-27, 2017. This issue includes papers presented in the following symposia:•             Symposium 3     14th International Symposium on Solid Oxide Fuel Cells (SOFC)•             Symposium 8     11th International Symposium on Advanced Processing & Manufacturing Technologies for Structural & Multifunctional Materials and Systems•             Symposium 11   Advanced Materials and Innovative Processing ideas for the Production Root Technology•             Symposium 12   Materials for Extreme Environments: Ultrahigh Temperature Ceramics (UHTCs) and Nano-laminated Ternary Carbides and Nitrides (MAX Phases)•             Symposium 13   Advanced Materials for Sustainable Nuclear Fission and Fusion Energy•             Symposium 14   Crystalline Materials for Electrical, Optical and Medical Applications•             Symposium 15   Additive Manufacturing and 3D Printing Technologies•             Focused Session 1  Geopolymers, Chemically Bonded Ceramics, Eco-friendly and Sustainable Materials