Fox Chapel Publishers International – förlag

In the UK between 1957 and 1964 Massey Ferguson manufactured some 380,000 MF35s, the most popular mediumsized farm tractors of the period. Many have remained in work and they are a restorer's favourite machine. Chris Jaworski's book, based on his heavily illustrated articles for Tractor & Machinery magazine, is a step-by-step manual on servicing and repairing these machines. This book goes back to the basics. The range and quality of his photographs are also far higher than those of the originals fromsixty years ago. The main headings of the book are: buying and safety; weekly checks; operator maintenance; engines; cooling systems; fuel systems; transmissions; rear axle and PTO; brakes; hydraulics; steering and front axle; electrics; bodywork. For owners involved in servicing, repairs or restoration this crystal-clear guide will help them enjoy getting the work doneefficiently.

The Nordic Tractor traces the history of tractor production in Sweden and Finland. The story goes back over 200 years to the 19th century when the industrial revolution was sweeping across Britain, and Sweden wanted to establish their own manufacturing powerhouses.This was an exciting and fast moving time for engineering and this book traces the ups, downs and eventual demise of some of the first manufacturers working to serve the particular needs of the agricultural and forestry industries in this densely forested and mountainous region. It then looks in depth at the companies who emerged from this, who learnt from their own and others' mistakes and built on the widespread technological advances of the time to build up names for themselves in Northern parts of Europe.Today, Valtra - now owned by AGCO - stands proudly as the last remaining agricultural tractor maker in Scandinavia, but The Nordic Tractor shows where their roots lie in the establishment and history of companies such as Bolinder, Munktells, Volvo and Valmet, who all stood out as being major players in the Nordic region.Including over 100 photos, many of which have been previously unpublished, this book will appeal to those with a specific interest in Nordic tractors, Nordic engineering and general Nordic history as well as the general tractor enthusiast.

The techniques of depositing a thin metallic layer on an object for decoration, corrosion protection, electrical conductivity, wear resistance and so on have been known for many years but have been developed and improved to a remarkable extent in the second half of this century. This book sets out to discuss the principles and practice of those forms of plating most suited to the amateur and small workshop, using relatively simple and inexpensive equipment to produce results virtually undetectable from work carried out by major plating concerns. Jack Poyner, a professional involved in all forms of plating for many years, is also a keen model engineer able to recognise the dividing line between what his average fellow enthusiast would consider practical and worthwhile and what is really better left to experts in the field. The result is a really useful and practical book, which will be of value to both amateur and light industrial users in many diverse fields.

Can you read the skies? Clouds produce an ever-changing skyscape and a vital clue to predicting whether it’s going to rain or shine. This handy little cloud-spotting guide explains:•How to identify each type of cloud•The processes are at work to produce them•The significance they have for our weather•Optical phenomena produced by certain cloudsLearn the lost countryside art of cloud reading and understand the most essential of nature’s clues and signs.

Developments in re-chargeable batteries and electronic systems have revolutionised electric powered radio control aircraft flying in recent years, particularly the lightweight end of the spectrum. Indoor flying with ultra-slow flying models of very light weight and now outdoor flight in restricted places is there to be enjoyed by all radio control modellers. Since the advent of practical electric powered models, German enthusiasts have been in the forefront of their development and Hinrik Schulte has developed a high level of expertise in the design, building and flying of super-lightweights. In Parkflyer, he has laid out the pointers to success in an easy-to-read form for all modellers who wish to join the movement. The book offers information on building, flying and choosing suitable sites for lightweight outdoor flying models and is packed with hints and tips on the gear and the models of which the author has practical experience.

Gears in one form or another are a part of most mechanisms, but they are by no means as simple as they may appear. This book explains simply, clearly and comprehensively the underlying theory involved and, in its second part, how to cut gears on a lathe or milling machine. Explanations and reasons for all conventional types of gears are clearly set out in this book together with useful tables and machinery techniques to form an invaluable reference work for anyone dealing with machinery. It covers all the questions raised by enthusiasts who have watched the author demonstrating gear-cutting techniques at exhibitions throughout Britain, where his advice on engineering matters has been constantly sought.

Flying a model helicopter is a challenge almost as difficult as flying a real one, and the wise modeller will seek the fullest advice on all the possible variations and handling techniques before embarking on attempts to fly. They will find all the advice they need here - in Dave Day's classic book, now revised and updated for the first decade of the 21st century. The continuing development of radio controlled model helicopters over the years since this book was originally published has led to great sophistication in the hobby. This in turn has produced a situation where the actual flying of a correctly set up model with the latest radio equipment is considerably easier. Despite this, the process of learning to fly has not really changed a great deal, while the setting-up process has become increasingly complex. Both must be learned and developed by the individual with practice and perseverance. In this book Dave Day, who had the forethought to record his early experiences as they happened, and who has continued the process as his skills developed, sets out a step-by-step programme from the first exercises through to advanced aerobatics and beyond.These are accompanied by comments on a typical model, its requirements and its setting-up which will be of interest and value to all model helicopter flyers irrespective of their skills.

This is the latest edition - fully revised and updated - of the standard textbook on aerodynamic theory, as applied to model flight. Everything is explained in a concise and practical form for those enthusiasts who appreciate that a better understanding of model behaviour is the sure path to greater success and enjoyment, whether just for fun or in competition. The revisions for this new edition reflect the significant developments in model aircraft during the last few years, and include brand new data: - The chapter on aerofoils has been rewritten to take account of the vast amount of testing carried out recently in the USA by the University of Illinois. - A brand new chapter explains the latest research into the flight of birds and insects and how it is applied to small drones and model-sized surveillance aircraft. - Older wind tunnel test reports all replaced with the latest trials and measurements.

This book explains in simple terms the fundamental principles of flight and the basic aerodynamic factors affecting radio controlled flying models. Neither mathematics or higher physics is required in order to understand how and why model aircraft behave and sometimes misbehave in the way that they do. A little theory can be turned to practical advantage, enhancing model performance and the enjoyment experienced by the model flier. Although the book was written primarily for fliers of conventional radio-controlled models, the principles apply to other aspects of model flying such as free flight, control-line, helicopters and gliders.

The centre-lathe is by far the most versatile machine tool in the workshop, but as soon as you depart from plain turning between centres, the question arises 'how to hold the work'. This book explains the methods and techniques required. A fundamental requirement of lathe operation, for accuracy and safety, is the ability to hold any workpiece securely and, preferably, repeatedly on the machine. While few problems arise with straightforward work on a properly aligned lathe, the variety of jobs undertaken by small workshops and model engineers is bound to give rise to occasions when how to hold work requires consideration. When great accuracy is essential, working methods and lathe set-up are vital for an acceptable result. In this book Tubal Cain discusses in his inimitable, practical style all aspects of the subject with the whys and hows, including basic lathe alignment.

Despite the growing numbers of milling machines in amateur workshops, a majority of model engineers still rely on a lathe and a drilling machine as the basic equipment. The lathe, 'the king of machine tools', can be adapted for almost any function, but next to turning its most valuable use is for milling operations, either using the lathe itself to drive the cutters or by extending its scope by the addition of a separate milling attachment. One of the most popular titles in model engineering books for almost sixty years was Milling in the Lathe, which first appeared in the 1920s and continued in updated and revised editions until 1983. This book replaces it, covering all the basic information it contained and adding to it from recent experiences and developments. The author, Tubal Cain, needs no introduction to Model Engineer readers as a highly experienced engineer and skilled craftsman with an ability to write on engineering subjects in a clear, simple and thorough style.

If fear of the unknown is all that is preventing you from embarking on the satisfying hobby of model engineering, then this is the book that will banish your concerns. Author Harold Hall has established his reputation as a mentor to tyro model engineers through the pages of Model Engineer magazine and Model Engineers' Workshop, of which he was the editor for a number of years. This book assumes no previous experience and using the medium of twelve lathe turning projects will lead prospective model engineers through all of the basic techniques needed to tackle ambitious projects. All of the projects are extensively illustrated and full working drawings accompany the text. Once followed through, the reader will have amassed a wealth of practical skills and a range of useful workshop tools and equipment.

Joining metals by one form or another of soft or hard soldering, or brazing with various alloys, are run-of-the-mill jobs in model and light engineering workshops - so much so that little thought is given as to whether there might be a quicker, more efficient or less expensive means of achieving the required end. In Soldering and Brazing respected engineering writer Tubal Cain examines in detail the processes, equipment and materials, and explains what is happening in the joints as they are made with practical examples, test pieces, tabulated data etc. This is a thorough, comprehensive and, above all, useful book.

Over many years in a workshop, the knowledge and ability to perform a wide number of relatively minor jobs becomes second nature to a skilled engineer, but the amateur, no matter how great his natural talent, rarely has the opportunity to experience the same wide range of tasks. This book, by the experienced engineer Ian Bradley, contains useful advice and instruction for beginners on workshop practices including arbors and mandrels, belt jointing and splicing, shaft collars, finishing metal surfaces, G-clamps, surface gauges, cutting holes, special nuts, hand turning tools, the wobbler, case-hardening, and machining square material. This book was suggested to the author by his many readers and correspondents as a supplementary volume to his classic textbook The Amateur's Workshop.

Sharpening workshop tools is probably the most diverse of all workshop activities and the one that is least understood by the majority of workshop owners. This is not unreasonable in view of the wide range of equipment suggested for the task, ranging from the complex, typically an industrial tool and cutter grinder, through to the humble off hand grinder. This book illustrates how most sharpening tasks can be carried out using an off hand grinder and a few simply made accessories, whilst doing this to a standard comparable to that achieved using much more sophisticated equipment. A lack of understanding of the processes almost certainly results in the workshop owner attempting tasks with far from perfect cutting tools that can diminish the satisfaction of a job well done. With the information in this book this situation can be avoided and working with blunt tooling should be a thing of the past.

The little grey Fergie is Britain's best-loved tractor, the light user-friendly machine that finally replaced the horse on farms. This highly illustrated account covers the full history of Harry Ferguson's tractor products from his pioneering work before the 1930s to the merger with Massey in 1957. The author has had access to fresh archive material and has interviewed many of the surviving men who were associated with Ferguson. The appeal of the Fergie lay in its lightness and utility, and also in the system of mechanized farming of which it was a part. Throughout the book, reference is made to the implements which lay at the heart of the system.

Brian King has earned an international reputation for the quality of his models, all built using skills initially learned during a 5-year craft apprentice-ship when he acquired the basic practical skills in both wood and metal work. These skills, allied to a natural talent, have resulted in his very complicated models of large battleships from all eras. This book is a compilation of material originally published in the specialist hobby magazine Model Boats in which the master modeller has passed on many gems of experience to would-be builders of ship models, including anchors, gun barrels, portholes, decking, rudders, propellors, fittings; turrets; basic hulls; close-up on life saving gear; cowl ventilators; computers and modelling, photographing your models and working to dimensions. A lifetime of modelling experience is contained within these pages. There are few modellers, expert or novice, who will not benefit from this opportunity to read and learn. Previous books by Brian King include Advanced Ship Modelling (2000; 1-85486-122-0) and Photo Etching (2005; 1-85486-237-5).

Do you know what breeds of horses are on the brink of extinction? Impress friends and relatives with interesting facts about more than 40 breeds of horses, history, appearances, uses, roles in human history, and other fun facts. From working to racing horses and common to rare, learn all about these beautifully majestic animals with this fascinating guide and Know Your Horses!

The major difference between free-flight and radio-controlled scale models is that all the adjustments to the flight path of the former must be made before release. Free flight models must be capable of stable flight, whether under power or on the glide, without the need or the opportunity to carry out in-flight alterations. This is a challenge most surely met by lightly loaded, slow-flying models based on full size machines having those characteristics, best typified by early bi-planes.

One of the most useful functions of a modern lathe is its ability to cut any form of external or internal thread of any thread form, pitch or diameter within the overall capacity of the machine. Detailed information of a practical nature is, however, not easy to find - a situation that this book does much to rectify. The author was a very experienced engineer with the capability of converting factual analyses into easily understood forms. His own expertise and the standards to which he worked are evident in his writing, and in addition he is also quite at home with both imperial and metric measures having considerable experience in the conversions required when working in partially metricated areas. This book is not only an invaluable treatise on lathe screwcutting but is also a useful demonstration of working in both imperial and metric standards.

Few mechanics are entirely devoid of springs of one sort or another, but satisfactory operation rests on details such as spring strength and degree of movement. Yet information on calculating and making springs is not easily available. This book explains the property of each type of spring, plus essential materials and methods. Engineers, professional or amateur, often find designing springs difficult due to the number of variables and the complexity of the formulae. The book also introduces the designer to charts and nomograms, which greatly simplify the process. Tubal Cain draws on several decades of experience in the actual processes and covers the design and manufacture of compression and extension coil springs, simple and compound leaf springs, torsion springs and torsion bars, springs relying on bending actions and a useful graphical method of designing valve springs for IC engines.

This book follows on from the same author's introduction to the Mini-Lathe (Workshop Practice Series No. 43) and presents a series of projects which are intended to extend the versatility of this little machine. In some cases, additional machining capacity will be required, which some readers may find at their local model engineering club. The book covers the Mark 2 Mini-Lathe, and specific tools such as the radius turning attachment, the tailstock and the dividing head, and includes techniques such as taper turning and knurling. Whilst specifically written for the Mini-Lathe, some of the projects in this book can equally be applied to other small model engineering lathes and in many cases the concepts can be scaled to suit other equipment.

This book contains a comprehensive range of data, which is required in the metalworking workshop and by those designing a wide range of engineered items, tools and machines. It provides, in a single concise volume, data that is only otherwise available by reference to many different sources or more expensive publications. For those involved in restoration work, the book also includes details of items not now used, and for which data is not easy to locate. Harold Hall was, for a number of years, the editor of Model Engineers' Workshop magazine and is the author of four previous books in this indispensable series.

The evolution of the compact, or portable, lathe has brought many a model engineer's life-long ambition to reality. No longer regarded as the scaled-down variant of the long-established permanent workshop machine, they are purpose-designed tools of remarkable ingenuity in their own right. Compact lathes (such as the Unimat III, Peatol, Shearline and Cowell range) are inexpensive, self-contained, adaptable to a broad range of machining techniques and ideally suited for beginners and those with working space restrictions. Stan Bray's comprehensive introduction to the subject covers the technology and the components, the machining operations and facilities which will enable the novice or experienced operator quickly to reach full proficiency and achieve the highest standards of lathe work.

The definitive work on the use of the small (three and a half inch) lathe which has been the primer for every amateur, student and apprentice engineer, modelmaking hobbyist, small garage proprietor and light engineering operator since its original publication in 1948. The author has succeeded in giving a complete course of instruction, embracing almost every process that can be accomplished own the small lathe including information on tools, accessories and costs. The amateur's problems are tackled in a refreshingly practical manner, showing how the model engineer or small industrial user can perform a variety of operations normally requiring a whole workshop full of machinery. Photographs and drawings provide step-by-step instructions on a wide range of topics which will interest all engineers - from apprentices to retired hobbyists.

A concise and informative introduction to airbrushing methods for modellers, which contains a number of useful, graded projects which enable the beginner to develop airbrushing skills. There are chapters that cover techniques for use with both scale and non-scale models and even full size custom cars. The book contains a great deal of information on types of airbrushes, sprayguns and their maintenance, plus useful discussions dealing with the different types of compressors used in airbrushing, how to choose or build a compressor and their safe use. Safety is always paramount with the author, with a chapter dedicated to health and safety considerations covering the use of a compressor, types of paint and dope, masks and respirators. He also explains the different materials that can be used in airbrushes and their application. This is a useful resource for a beginner to the art and techniques of airbrushing, providing a complete overview of the subject.

This instruction manual answers all your questions, both theoretical and practical, about crafting with glassfibre, or GRP (glass reinforced plastic). It is really a pocket reference for anybody who works with any type of GRP including Kevlar and carbon fibre. It starts with a brief history lesson and then leaps into the different materials, their pros & cons, how to work with them in many ways, how to mould, laminate, repair - anything from scale models to full sized cars, yachts, furniture, water tanks, fish ponds and more. The text is simple but thorough and is both pragmatic and theoretical. If you want technical specifications you will find those too.

In this valuable book Tubal Cain takes the reader beyond the superficial or the simply practical with explanations of the composition of steel, its additives, and the effects of different temperatures on its constituents. With a grasp of what changes are actually taking place in the metal the care needed in following the practical processes described becomes understandable and will lead to better and more consistent results. Flame, salt bath and furnace heating are detailed, with information on accurate measurement or recognition of temperature levels. For the average small workshop operative or model engineer the discourses on tool material, hardening and tempering will be of most use, and in this connection this book replaced the author's earlier Hardening and Tempering Engineers' Tools, providing a broader-based, more detailed and up to date examination of the subject.

Although much of model engineering work is a matter of making one part to fit another and thus may obviate the need for the sophisticated means of measuring often called for in production engineering, the accuracy of a finished job begins with the exactness of the initial making out and continues with the accuracy of measurements made during the progress of the work. How to use measuring equipment and how to mark out work - not always the simple matter it might at first seem - are essential skills for any engineer and the purpose of this book is to show how they may be acquired and employed.