Holm Altenbach is a member of the International Association of Applied Mathematics and Mechanics (GAMM), and the International Research Center on Mathematics and Mechanics of Complex Systems (M&MoCS), Italy. He has held positions at the Otto von Guericke University Magdeburg and at the Martin Luther University Halle-Wittenberg, both in Germany. Since 2017 he is a member of the Vietnamese-German University (VGU) in Ho Chi Minh City.  He graduated from Leningrad Polytechnic Institute in 1985 (diploma in Dynamics and Strength of Machines). He defended his Ph.D. in 1983 and was awarded his Doctor of Technical Sciences in 1987, both at the same institute.He is currently a Full Professor of Engineering Mechanics at the Otto von Guericke University Magdeburg, Faculty of Mechanical Engineering, Institute of Mechanics (since 2011), and has been acting as Director of the Institute of Mechanics since 2015.His areas of scientific interest are general theory ofelastic and inelastic plates and shells, creep and damage mechanics, strength theories, and nano- and micromechanics.  He is author/co-author/editor of 60 books (textbooks/monographs/proceedings), approximately 380 scientific papers (among them 250 peer-reviewed) and 500 scientific lectures. He is Managing Editor (2004 to 2014) and Editor-in-Chief (2005 – to date) of the Journal of Applied Mathematics and Mechanics (ZAMM) – the oldest journal in Mechanics in Germany (founded by Richard von Mises in 1921). He has been Advisory Editor of the journal “Continuum Mechanics and Thermodynamics” since 2011, Associate Editor of the journal “Mechanics of Composites” (Riga) since 2014, and Co-Editor of the Springer Series “Advanced Structured Materials” since 2010.He was awarded the 1992 Krupp Award; 2000 Best Paper of the Year—Journal of Strain Analysis for Engineering Design; 2003 Gold Medal of the Faculty of Mechanical Engineering, Politechnika Lubelska, Lublin, Poland; 2004 SemkoMedal of the National Technical University Kharkov, Ukraine; 2007 Doctor Honoris Causa, National Technical University Kharkov, Ukraine; 2011 Fellow of the Japanese Society for the Promotion of Science; 2014 Doctor Honoris Causa, University Constanta, Romania; 2016 Doctor Honoris Causa, Vekua Institute, Tbilisi, Georgia; 2018 Alexander von Humboldt Award (Poland).Andreas Öchsner is a Full Professor of Lightweight Design and Structural Simulation at Esslingen University of Applied Sciences, Germany. After completing his Dipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart (1997), he served as a research and teaching assistant at the University of Erlangen-Nuremberg from 1997 to 2003 while pursuing his Doctor of Engineering Sciences (Dr.-Ing.) degree. From 2003 to 2006, he was an Assistant Professor at the Department of Mechanical Engineering and Head of the Cellular Metals Group affiliated with the University of Aveiro, Portugal. He spent seven years (2007–2013) as a Full Professor at the Department of Applied Mechanics, Technical University of Malaysia, where he was also Head of the Advanced Materials and Structure Lab. From 2014 to 2017 he was a Full Professor at the School of Engineering, Griffith University, Australia and Leader of the Mechanical Engineering Program (Head of Discipline and Program Director).

“Presenting a complete state-of-the-art of continuum mechanics and continuum thermodynamics, the encyclopedia will be useful to Master degree students. They will find the necessary bases of continuum mechanics. The Encyclopedia will also be useful to researchers involved in continuum mechanics. … With the included lists of references for the different entries they are interested in, they will get links to deeper analyses. The Encyclopedia is intended to live thanks to the contributions of readers … .” (Alain Brillard, zbMATH 1477.74001, 2022)

• Plasticity Continuum Damage Mechanics Biographies of Scientists Continuum Mechanics Basics Fracture Mechanics Shells Variational Principles Generalized Continua Numerical Continuum Mechanics Plane Problems Plates Nanomechanics Impact Mechanics Biomechanics Tensor Calculus Tensor Calculus Lightweight Structures Lightweight Structures Lightweight Structures Continuum Thermodynamics Composites Continuum Waves Creep Mechanics Optimization Fractional Calculus in Continuum Mechanics Fractional Calculus in Continuum Mechanics Ray Expansion in Continua Mechanical Behavior and Performance of Electronic and Photonic Materials, Packages and Systems Rods and Beams Adaptive Structures Random and Fractal Media

Holm Altenbach is a member of the International Association of Applied Mathematics and Mechanics (GAMM), and the International Research Center on Mathematics and Mechanics of Complex Systems (M&MoCS), Italy. He has held positions at the Otto von Guericke University Magdeburg and at the Martin Luther University Halle-Wittenberg, both in Germany. Since 2017 he is a member of the Vietnamese-German University (VGU) in Ho Chi Minh City.  He graduated from Leningrad Polytechnic Institute in 1985 (diploma in Dynamics and Strength of Machines). He defended his Ph.D. in 1983 and was awarded his Doctor of Technical Sciences in 1987, both at the same institute.He is currently a Full Professor of Engineering Mechanics at the Otto von Guericke University Magdeburg, Faculty of Mechanical Engineering, Institute of Mechanics (since 2011), and has been acting as Director of the Institute of Mechanics since 2015.His areas of scientific interest are general theory ofelastic and inelastic plates and shells, creep and damage mechanics, strength theories, and nano- and micromechanics.  He is author/co-author/editor of 60 books (textbooks/monographs/proceedings), approximately 380 scientific papers (among them 250 peer-reviewed) and 500 scientific lectures. He is Managing Editor (2004 to 2014) and Editor-in-Chief (2005 – to date) of the Journal of Applied Mathematics and Mechanics (ZAMM) – the oldest journal in Mechanics in Germany (founded by Richard von Mises in 1921). He has been Advisory Editor of the journal “Continuum Mechanics and Thermodynamics” since 2011, Associate Editor of the journal “Mechanics of Composites” (Riga) since 2014, and Co-Editor of the Springer Series “Advanced Structured Materials” since 2010.He was awarded the 1992 Krupp Award; 2000 Best Paper of the Year—Journal of Strain Analysis for Engineering Design; 2003 Gold Medal of the Faculty of Mechanical Engineering, Politechnika Lubelska, Lublin, Poland; 2004 SemkoMedal of the National Technical University Kharkov, Ukraine; 2007 Doctor Honoris Causa, National Technical University Kharkov, Ukraine; 2011 Fellow of the Japanese Society for the Promotion of Science; 2014 Doctor Honoris Causa, University Constanta, Romania; 2016 Doctor Honoris Causa, Vekua Institute, Tbilisi, Georgia; 2018 Alexander von Humboldt Award (Poland).Andreas Öchsner is a Full Professor of Lightweight Design and Structural Simulation at Esslingen University of Applied Sciences, Germany. After completing his Dipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart (1997), he served as a research and teaching assistant at the University of Erlangen-Nuremberg from 1997 to 2003 while pursuing his Doctor of Engineering Sciences (Dr.-Ing.) degree. From 2003 to 2006, he was an Assistant Professor at the Department of Mechanical Engineering and Head of the Cellular Metals Group affiliated with the University of Aveiro, Portugal. He spent seven years (2007–2013) as a Full Professor at the Department of Applied Mechanics, Technical University of Malaysia, where he was also Head of the Advanced Materials and Structure Lab. From 2014 to 2017 he was a Full Professor at the School of Engineering, Griffith University, Australia and Leader of the Mechanical Engineering Program (Head of Discipline and Program Director).

“Presenting a complete state-of-the-art of continuum mechanics and continuum thermodynamics, the encyclopedia will be useful to Master degree students. They will find the necessary bases of continuum mechanics. The Encyclopedia will also be useful to researchers involved in continuum mechanics. … With the included lists of references for the different entries they are interested in, they will get links to deeper analyses. The Encyclopedia is intended to live thanks to the contributions of readers … .” (Alain Brillard, zbMATH 1477.74001, 2022)

• Plasticity Continuum Damage Mechanics Biographies of Scientists Continuum Mechanics Basics Fracture Mechanics Shells Variational Principles Generalized Continua Numerical Continuum Mechanics Plane Problems Plates Nanomechanics Impact Mechanics Biomechanics Tensor Calculus Tensor Calculus Lightweight Structures Lightweight Structures Lightweight Structures Continuum Thermodynamics Composites Continuum Waves Creep Mechanics Optimization Fractional Calculus in Continuum Mechanics Fractional Calculus in Continuum Mechanics Ray Expansion in Continua Mechanical Behavior and Performance of Electronic and Photonic Materials, Packages and Systems Rods and Beams Adaptive Structures Random and Fractal Media

Holm Altenbach is a member of the International Association of Applied Mathematics and Mechanics (GAMM), and the International Research Center on Mathematics and Mechanics of Complex Systems (M&MoCS), Italy. He has held positions at the Otto von Guericke University Magdeburg and at the Martin Luther University Halle-Wittenberg, both in Germany. Since 2017 he is a member of the Vietnamese-German University (VGU) in Ho Chi Minh City.  He graduated from Leningrad Polytechnic Institute in 1985 (diploma in Dynamics and Strength of Machines). He defended his Ph.D. in 1983 and was awarded his Doctor of Technical Sciences in 1987, both at the same institute.He is currently a Full Professor of Engineering Mechanics at the Otto von Guericke University Magdeburg, Faculty of Mechanical Engineering, Institute of Mechanics (since 2011), and has been acting as Director of the Institute of Mechanics since 2015.His areas of scientific interest are general theory ofelastic and inelastic plates and shells, creep and damage mechanics, strength theories, and nano- and micromechanics.  He is author/co-author/editor of 60 books (textbooks/monographs/proceedings), approximately 380 scientific papers (among them 250 peer-reviewed) and 500 scientific lectures. He is Managing Editor (2004 to 2014) and Editor-in-Chief (2005 – to date) of the Journal of Applied Mathematics and Mechanics (ZAMM) – the oldest journal in Mechanics in Germany (founded by Richard von Mises in 1921). He has been Advisory Editor of the journal “Continuum Mechanics and Thermodynamics” since 2011, Associate Editor of the journal “Mechanics of Composites” (Riga) since 2014, and Co-Editor of the Springer Series “Advanced Structured Materials” since 2010.He was awarded the 1992 Krupp Award; 2000 Best Paper of the Year—Journal of Strain Analysis for Engineering Design; 2003 Gold Medal of the Faculty of Mechanical Engineering, Politechnika Lubelska, Lublin, Poland; 2004 SemkoMedal of the National Technical University Kharkov, Ukraine; 2007 Doctor Honoris Causa, National Technical University Kharkov, Ukraine; 2011 Fellow of the Japanese Society for the Promotion of Science; 2014 Doctor Honoris Causa, University Constanta, Romania; 2016 Doctor Honoris Causa, Vekua Institute, Tbilisi, Georgia; 2018 Alexander von Humboldt Award (Poland).Andreas Öchsner is a Full Professor of Lightweight Design and Structural Simulation at Esslingen University of Applied Sciences, Germany. After completing his Dipl.-Ing. degree in Aeronautical Engineering at the University of Stuttgart (1997), he served as a research and teaching assistant at the University of Erlangen-Nuremberg from 1997 to 2003 while pursuing his Doctor of Engineering Sciences (Dr.-Ing.) degree. From 2003 to 2006, he was an Assistant Professor at the Department of Mechanical Engineering and Head of the Cellular Metals Group affiliated with the University of Aveiro, Portugal. He spent seven years (2007–2013) as a Full Professor at the Department of Applied Mechanics, Technical University of Malaysia, where he was also Head of the Advanced Materials and Structure Lab. From 2014 to 2017 he was a Full Professor at the School of Engineering, Griffith University, Australia and Leader of the Mechanical Engineering Program (Head of Discipline and Program Director).

“Presenting a complete state-of-the-art of continuum mechanics and continuum thermodynamics, the encyclopedia will be useful to Master degree students. They will find the necessary bases of continuum mechanics. The Encyclopedia will also be useful to researchers involved in continuum mechanics. … With the included lists of references for the different entries they are interested in, they will get links to deeper analyses. The Encyclopedia is intended to live thanks to the contributions of readers … .” (Alain Brillard, zbMATH 1477.74001, 2022)

• Plasticity Continuum Damage Mechanics Biographies of Scientists Continuum Mechanics Basics Fracture Mechanics Shells Variational Principles Generalized Continua Numerical Continuum Mechanics Plane Problems Plates Nanomechanics Impact Mechanics Biomechanics Tensor Calculus Tensor Calculus Lightweight Structures Lightweight Structures Lightweight Structures Continuum Thermodynamics Composites Continuum Waves Creep Mechanics Optimization Fractional Calculus in Continuum Mechanics Fractional Calculus in Continuum Mechanics Ray Expansion in Continua Mechanical Behavior and Performance of Electronic and Photonic Materials, Packages and Systems Rods and Beams Adaptive Structures Random and Fractal Media