Emerging Technologies and Materials in Thermal Engineering – serie

Combustion Synthesis: Processing and Materials provides a comprehensive introduction to combustion synthesis, from fundamentals to applications. The book offers an up-to-date reference for both researchers who have already been working on combustion synthesis and those entering this field. Focusing specifically on the materials science and engineering dimensions of combustion synthesis, the book thoroughly explores the most important processes and materials under investigation today. It offers a comprehensive overview of the field to beginners, while experienced readers will find detailed explanations and up-to-date descriptions of the state of the art of combustion synthesis, focused on a range of vital processes and materials.Offers a logically organized framework of knowledge of combustion synthesis, from fundamentals to applicationsDiscusses the most relevant topics in combustion synthesis, including recent resultsCaters specifically to materials scientists and engineers by focusing on the most important processes and materials

CFD Simulations of Advances of Solar Thermal Systems offers readers the tools needed to optimize the performance of solar thermal systems with low costs through CFD applications and simulations. This book aims to advance the enhancement and affordability of solar thermal systems via CFD applications. Each chapter contains overviews paired with relevant illustrations, diagrams, and calculations describing each system. Sections then progress into intersectionality and application of CFDs for each, including advances -- all woven into a volume that flows from chapter to chapter with a consistent structure that delivers readers a valuable, easy-to-follow, practical reference.Production of clean energy is a global goal. Several clean energy sources are available, including geothermal, wind, hydropower, and solar energy. The challenge is to develop efficient methods and processes for beneficial, rapidly scaled, safe and economically viable exploitation of these resources. Solar energy represents one of the most important renewable sources of clean energy. Solar energy is exploited using various methods - solar thermal systems convert solar energy to thermal energy via solar collectors, solar air heaters, solar chimney power plants, solar dishes, solar cookers, and solar parabolic concentrators.Supplies steps for using CFD simulations of solar thermal systems, including geometry, mesh, and boundary conditionsPresents the numerical methods used to simulate solar thermal systems, including the radiation model, turbulence model, and energy equationIntroduces results offered by CFD for solar thermal system applications, including radiation distributions, temperature distributions, velocity distributions, and pressure distributions across a variety of solar thermal systemsSupports UN SDGs 7 (Affordable and Clean Energy), 9 (Industry, Innovation, and Infrastructure), and 13 (Climate Action)

Advancing Thermal Technologies: Practical Applications and Future Materials is a comprehensive exploration of the vital intersection between thermal materials and technology. This book delves into the intricate realm of thermal science, navigating through the latest advancements and innovative materials shaping the future landscape of technology. With a focus on practical applications, it offers insights and strategies to enhance energy efficiency, optimize manufacturing processes, and promote sustainability across various industries. Topics covered include thermoelectric devices and applications, advancements in thermoelectric technology, and ejector-enhanced heat pumps. It also explores heat transfer and conduction in composite materials, as well as advanced materials for thermal applications.The book further delves into solar energy and energy efficiency, including the application of phase change materials in solar panels, and energy storage and nanotechnology, such as recent developments in energy storage utilizing quantum dots.Explores the latest advancements and innovative materials shaping the future of thermal science and technologyBridges the gap between research advancements and practical implementation, empowering readers to navigate and excel in the dynamic landscape of thermal innovationsOffers practical insights, strategies, and solutions to enhance energy efficiency, optimize manufacturing processes, and promote sustainability in various industries

Advances in Thermal Engineering: Innovations for Sustainable Solutions takes readers on a journey through cutting-edge thermal engineering innovations and sustainable solutions in this comprehensive reference book. From advanced heat transfer technologies to environmental sustainability initiatives, the book delves into a diverse array of topics, providing insights into the latest advancements in thermal sciences and engineering. It covers a wide range of topics in thermal engineering, including advanced heat transfer technologies, innovative cooling systems, sustainable energy solutions, and emerging materials. Readers will explore practical applications, case studies, and discussions on environmental sustainability, thermal management in various systems, and the latest advancements.From fundamental principles to cutting-edge research, this book provides a comprehensive overview of thermal engineering innovations and their applications in diverse industries. It will equip readers -- from researchers, engineers, educators, students, industry professionals, and environmentalists -- with the knowledge and tools needed to address challenges and innovate in the ever-evolving field of thermal engineering.Demonstrates real-world relevance through practical applications and case studies that demonstrate the application of thermal engineering concepts in various industries and scenariosHighlights emerging trends and technologies in thermal engineering, such as nanomaterial applications and thermal modeling in electrical devicesOffers comprehensive coverage of various thermal engineering topics, ranging from advanced heat transfer technologies to thermal management in mechanical systems

Advanced Modeling, Analysis and Optimization of Thermal and Integrated Energy Systems presents groundbreaking research on the innovative "heat current method" for precise and efficient modelling of thermodynamic systems. The book offers a comprehensive exploration of integrated power-thermal systems, emphasizing holistic optimization strategies crucial for sustainable energy transitions. Authored by experts in the field, this book is a valuable resource for researchers and professionals seeking advanced methodologies in thermal engineering and energy system optimization. The book begins with an introduction that outlines the challenges faced by thermodynamic systems in the renewable energy transition. It progresses to explore the fundamentals of modelling and optimizing thermodynamic and integrated thermal-power systems, introducing the novel heat current method and its application. The subsequent chapters delve into the heat current method for thermodynamic system modelling, efficient simulation and optimization of thermodynamic systems, holistic modelling and analysis of integrated power-thermal systems, and coordinating flexibility and efficiency for renewable energy accommodation.Advanced Modeling, Analysis and Optimization of Thermal and Integrated Energy Systems offers valuable insights and practical solutions for a diverse audience of researchers, engineers, and energy professionals. Researchers and students working in thermal engineering, and sustainable energy will benefit from the novel methodologies and holistic approaches presented in this book. Engineers and professionals working in the energy sector, particularly those involved in system optimization and renewable energy integration, will find this book essential for advancing knowledge and best practices.Introduces a novel heat current method for the accurate and efficient modeling of thermodynamic systemsExplores the holistic modeling and optimization of integrated power and thermal systems to enhance flexibilityDiscusses a spatiotemporal coordination principle for optimal resource management in distributed energy systemsAnalyzes current studies and provides a systematic review of modeling and analysis methods for thermodynamic systemsEvaluates the practical implementation and direct applicability of advanced techniques for renewable energy transitions

Plate Heat Exchanger Enhancement Techniques: in Support of the Energy Transition and a Circular Economy provides fundamental knowledge on the applications of the plate heat exchanger (PHE) and how it can be optimized to make energy conversion more efficient. In addition, it introduces relevant studies that explain the heat transfer mechanism of the PHE, its design, and how developing more compact and evolved heat exchangers contributes to a sustainable, cleaner, and more energy-efficient future. Researchers, scientists, engineers, professionals, and students working in nanotechnology, materials science, and sustainability will find this volume valuable to their work.

Covers the fundamentals, concepts, and energy materials for all pillars of a circular economyIncludes state-of-the-art green technologies and energy materials that are outlined with specific applications for energy systems and economic and societal benefitsExamines an inter-knitted focus on energy materials and technologies - with an emphasis on reuse and recycling materials in support of conservation, efficiency, and sustainabilityEvaluates specific topics related to the synthesis and application of energy materials and their recycle, reuse, and lifecycleOutlines future perspectives, need, and scope of the circular economy

Photoelectrochemical and Enzymatic Conversion of CO2 into Fuels: A Shift Towards Net Zero Energy Landscape introduces a comprehensive guide on the effective utilization of renewable energy to convert CO2 into fuels or commodity chemicals, presenting new materials such as MXenes and phosphorenes that are now being used in the catalytic conversion of CO2. This book provides guidelines on how the structural variation of catalysts will impact the reduction of carbon dioxide emissions, presenting a detailed mechanism of CO2 conversion through different conversion methods such as photo reduction, electrochemical reduction, photoelectrochemical reduction, and enzymatic reduction.This will be a welcomed resource for researchers, students, academicians, engineers, and environmental experts and agencies studying the effects and benefits of the conversion of carbon dioxide into fuels for sustainable and renewable energy.Delivers a wealth of knowledge on cutting-edge technologies using low-cost abundant catalysts for photoelectrochemical reduction of CO2Focuses on the design and development of novel catalysts for electrochemical, photochemical, enzymatic, and artificial photosynthesis approaches for CO2 reduction into green fuel and value-added chemicalsAddresses major challenges and issues for greenhouse gases emission worldwide

Climate Change and Circular Economics: Human Society as a Closed Thermodynamic System aims to go beyond the concept of ‘fighting climate change’ to analyze the capacity of human society to evolve in relation to the environment based on a more complex approach. The book stresses the role of resource recovery by innovation in reducing the temperature increase, determined through an irreversible thermodynamic approach. Determining the speed of temperature increase contributed by selected economies and comparing these to environmental recovery time constants shows that emerging economies have a much greater speed and consequently a larger impact on environmental capability to recover.Chapters progress from an analysis of present society as a dissipative open system to a thermodynamics view of the need for a circular economy, a big data analysis of climate change and risk mitigation, economic indicators, including entropy and economics, risk maps of climate change events risks, and insights into the ‘Gibbs paradox’, which describes the connection of two separate systems (like society and environment).Offers a unique, intersectional perspective on climate changeIntroduces generational risk maps for climate change events, opening the possibility for insurance as well as other mitigation and adaptation policiesProvides methods to determine the contribution of selected economies to temperature increase and speed of increase using irreversible thermodynamics that allows for comparison with environmental recovery time constantsEnds with a solution of the Gibbs ‘paradox’ that relies not on binary logic, but rather a multivalued modal logic of possibilities that sheds a profound light on the interaction of separate spaces versus their combination

Applied Thermodynamics: Low-Temperature and Renewable Energy Systems pairs key fundamentals with practical applications that support sustainability. After outlining basic concepts and positions of thermodynamics, the book breaks down theory, the classic governing laws of thermodynamics, and overviews thermodynamic processes. The text then shifts to practical application examples, examining open systems, heat power plants, HVAC and power supply systems from renewable sources, methods and the efficiency of thermal systems, and machines and equipment. Geared to students and researchers, the book is packed with solved problems and self-control tests to facilitate understanding.The text fosters practical innovation in a well-established field by offering readers a contemporary examination of a topic as essential to energy as heat itself. Grounded in classical principles, this contemporary reference considers throughout the context of our current energy mix, applying the critical lens of sustainability and sustainable options for energy conversion.Explains methods of entropy and exergy analysisDissects historical digressions of fundamental provisions of thermodynamics, leading to more complete understandingProvides practical application examples of energy-conversion processes in power plants, drawn from various energy sourcesAddresses the development of both schemes and installations for conversion of various types of energy that contribute to the replacement of fossil fuels and the reduction of CO2 emissions

Revolutionizing Heat Transfer: Nanofluids, Turbulators, and Machine Learning for Sustainable Energy Efficiency bridges the knowledge gap between traditional heat transfer enhancement techniques and innovative approaches employing nanofluids and turbulators. Users will find this to be an all-inclusive resource on the latest advancements in nanofluids, turbulators, and machine learning techniques for heat transfer enhancement that also includes detailed guidance on the synthesis, characterization, design, and optimization of these technologies. Using an interdisciplinary approach, this book serves as a valuable reference for researchers and practitioners working on heat transfer in energy applications and students studying related areas.There is a growing need for this resource as it addresses both the limitations of current heat transfer techniques while also providing sustainable solutions for a wide range of engineering applications.Presents the synthesis, properties, and characterization of nanofluids and the design, optimization, and performance evaluation of turbulatorsProvides insights into the mechanisms of heat transfer enhancement using nanofluids and turbulators, along with their applications in various heat transfer systemsOffers guidance on the environmental and economic impacts of nanofluids and turbulators, enabling readers to make informed decisions on their implementationHighlights the challenges and future prospects of nanofluids and turbulators in renewable energy systems, waste heat recovery, and energy storage systemsEquips readers with the knowledge to address safety concerns, regulatory challenges, and develop standards and guidelines for nanofluid and turbulator applications

Advanced Thermal Engineering: Efficiency Enhancement, Emission Reduction, and Renewable Energy Integration provides a comprehensive overview of advanced thermal engineering and its applications in energy systems, focusing on environmental sustainability. This book offers in-depth information on technologies used to design and analyze thermal systems, discussing technical, economic, and environmental advantages and disadvantages of transitioning as technology evolves. Topics covered include heat transfer enhancement, renewable energy integration, emission reduction, waste heat recovery, nanotechnology, machine learning, environmental sustainability, case studies, and future trends. Other important points in the book include the interdisciplinary approach to thermal engineering, making it relevant for researchers, engineers, policymakers, and students. Other sections address practical applications and future trends, offering a thorough treatment of efficiency enhancement, emission reduction, renewable energy integration, and emerging technologies. The book's focus on environmental and economic considerations also ensures it is pertinent to global citizens seeking an up-to-date understanding of advanced thermal engineering principles and practices.Describes various heat transfer enhancement techniques, along with impacts on performance, economics, and the environmentCovers issues associated with energy recovery, storage, and the need for ongoing technology assessmentEquips readers with information regarding the use of energy enhancement techniques to tackle today's energy crisis

Waste Heat Recovery, Its Utilization and Performance Assessment: Fundamentals and Applications presents a variety of contemporary waste-heat applications designed for use as a guide to identify, utilize, and assess the performance of otherwise rejected waste heat sources in support of energy efficiency, affordable energy, and a reduced carbon footprint. This reference identifies feasible waste heat recovery opportunities from various sectors, including domestic, commercial, and industrial sources. Researchers, professors, and students in the field of thermal engineering will find this an excellent reference to understand waste heat recovery systems, including sources, recovery, conversion technologies, feasibility assessments, case studies, and more.Identifies different sources of recoverable waste heatDevelops suitable waste heat recovery technologies for a variety of domestic, commercial, and industrial applicationsAssesses the techno-economic feasibility of waste-heat driven systemsSupports sustainability by leveraging waste heat as a source of renewable heat energy

High-Pressure Thermoelastic and Thermophysical properties of smart materials: EOSs at High Pressure and Thermal Properties describes how high-pressure research is instrumental in different sectors and how EOS plays an important role in high-pressure research; displays various EOS modelling techniques; explains thermoelastic and thermophysical properties of materials from EOSs, and provides a blueprint of size and shape dependence thermal properties of smart materials. This book opens with an introduction to high-pressure research, surveys experimental and theoretical tools for study at high pressure, covers the role of EOSs to describe thermoelastic properties and their limitations, looks at different modelling techniques of EOSs, considers how extreme-compression behaviour is different from low-compression behaviour, examines thermoelastic properties of smart materials at high pressure, addresses the search of universal EOSs, analyzes the effect of shape and size on thermal properties of smart materials and culminates in future research. This volume provides researchers and academicians working in the field of high-pressure research and shape / size dependent thermal properties a one-stop reference that summates correlations between different aspects of high-pressure thermoelastic and thermophysical properties of advanced materials. It serves as a thorough introduction for less-experienced readers, but also provides a summary of state-of-the-art in the field to physicists, materials scientists and engineers working to exploit high pressure techniques for possible materials development and application.Covers the role of EOSs in high pressure physics and the modelling techniquesHighlights thermoelastic properties of some active smart materials and the gruneisen parameter and higher order gruneisen parameters at high pressureDescribes the shape size dependency of thermophysical properties and the infinite pressure range

Next Generation Renewable Thermal Energy Harvesting, Conversion and Storage Technologies is an essential guide for those interested in the field of renewable thermal energy. The book covers a wide range of topics, focusing on solar thermal, geothermal, and biomass energy. By presenting the fundamentals, advancements, and practical applications, the book bridges the gap in interdisciplinary knowledge. Readers will find valuable insights into the latest technological advancements and real-world case studies, making it a comprehensive resource for researchers, engineers, students, and policymakers. The book aims to inspire collaboration and innovation, contributing to a cleaner and more sustainable future.The book is divided into three sections, each dedicated to a specific renewable energy source. The first section covers solar thermal energy, including solar collectors, concentrating solar power systems, and thermal energy storage. The second section focuses on geothermal energy, discussing exploration techniques, drilling technologies, and optimizing power generation. The last section explores biomass energy, emphasizing sustainability and the integration of biomass with other energy sources.Delivers a consolidated resource that covers both theoretical foundations and real-world applicationsUnveils the latest innovations in solar thermal energy harvesting, including Photothermal Conversion Technologies and Materials Innovations in Collector TechnologiesReveals the power of Nanomaterials and Coatings for Enhanced Solar Thermal Absorption, as well as the use of Phase Change Materials for Energy Storage and RetrievalDives into Geothermal Energy Harvesting, Enhanced Geothermal Systems (EGS), and their applications in agriculture, aquaculture, communities, buildings, and more

Data-Driven Machine Learning Applications in Thermochemical Conversion Processes delves into the prospect of machine learning applications to optimize and enhance advanced thermochemical conversion processes, which are essential for converting biomass into energy and other valuable products. This book covers ML applications in higher heating value (HHV) predictions, catalyst screening, prediction of biofuels properties, material discovery and screening, as well as advancing emerging thermochemical conversion process technologies. Providing an in-depth examination of how big data analytics and ML models can be harnessed to predict system performance, understand complex reaction mechanisms, and accelerate development of innovative conversion technologies, as well as focusing on both theoretical and practical aspects, this book will be a welcome reference for researchers, engineers, and practitioners.Presents a comprehensive perspective by integrating the disciplines of geology, engineering, policy, and economics to provide a nuanced, comprehensive volume on the subjectBridges the gap between data science and thermochemical process engineeringSpans foundational features and digs deeper on root causes and remedies to challenges and limitations to yield a practical publication for a varied audienceUses cutting-edge characterization and modelling tools along with novel methodologies to make the subject practical, easy-to-understand and implementServes as a valuable resource for professionals, researchers, students, educators, and policymakers

Thermofluids in Sustainable Energy Systems: Fundamentals and Applications is an essential reference that delves into the intricate realm of energy conversion, thermal science, and thermofluids, with a focus on sustainable energy systems. This book offers a comprehensive understanding of fundamental principles, up-to-date applications, and emerging innovations in the field of thermofluids, effectively bridging the gap between theory and practice. It aims to deliver a practical reference on thermodynamics, fluid mechanics, and heat transfer in sustainable energy systems. It equip readers, including students, researchers, engineers, and professionals, with a consolidated knowledge base that merges fundamental principles with practical applications, equipping them to address real-world challenges in energy conversion, thermal management, and energy-efficient solutions. This book addresses the problem of scattered and fragmented information by providing a unified, contemporary resource on thermofluids in sustainable energy systems. It offers readers an in-depth understanding of thermofluid phenomena in energy conversion and their application in various sustainable energy technologies. By unraveling the fundamental principles, challenges, and innovations in the field, the book provides readers the necessary knowledge and skills to contribute to the development and implementation of sustainable energy solutions.Covers essential topics in thermodynamics, fluid mechanics, heat transfer, energy conversion, and sustainable energy systemsProvides a comprehensive understanding of thermofluids in sustainable energy systems, utilizing practical examples, case studies, and computational modeling techniques to address real-world challengesEmphasizes the significance of environmental impact and sustainability in energy systems, addressing environmental implications of various technologies, and providing strategies for developing eco-friendly systems

Phase Change Materials and Nano-PCMs offers a comprehensive exploration of nano-PCMs and nano-enhanced phase change materials, with particular emphasis on their applications. Divided into ten chapters, it delves into the history of thermal energy storage and PCM technologies, their chemistry, synthesis, and kinetics. Additionally, the book covers the crystallization processes involved. In later chapters, it examines the properties and applications of PCMs, their use in renewable energy, and the role of nanotechnology in phase change materials. It also addresses environmental and economic issues associated with PCM use, concluding with case studies to enhance reader understanding.This book is a valuable and timely reference for those focused on thermal energy storage. It is an essential resource for researchers and students interested in thermal energy storage.Provides comprehensive coverage of Nano-PCMs and Nano-Enhanced PCMsContains case studies and practical applicationsIncludes coverage on the use of PCMs in renewable energy

Exploring MXene and Advanced Nanomaterials in Renewable Energy Applications is a groundbreaking book that delves into the properties, synthesis and applications of MXene and other advances nanomaterials in renewable energy systems. MXene is a two-dimensional material that has great significance in renewable energy applications due to its high thermal conductivity. Several thermal systems used in renewable energy technologies can exploit the benefits of MXene and nanomaterials for enhanced heat transfer as a fluid, electrothermal energy conversion. thermal management of solar thermal and geothermal systems, and thermal energy storage. The low cost of production and scalability of MXene makes it a potential candidate to be seamlessly merged in renewable thermal applications. The book highlights MXene’s high thermal conductivity and its potential to revolutionize efficiency in a variety of renewable energy applications. It bridges the gap between scientific research and practical application, providing comprehensive knowledge for industry professionals, academics and students. This novel resource inspires innovation and advances research in this rapidly evolving field by improving thermal energy systems to generate more electricity, reducing greenhouse emissions and transition to low-carbon energy. The text catalyzes advancements in renewable energy applications, contributing to the global effort towards more sustainable energy solutions. Exploring MXene and Advanced Nanomaterials in Renewable Energy Applications educates and informs readers about the potential of advanced materials such as MXene to improve the efficiency, durability, and sustainability of renewable energy systems.Delivers a comprehensive overview of the latest developments in nanomaterials research, focused on MXene and its role in renewable energy technologiesShowcases the potential of advanced materials to improve the efficiency, durability, and sustainability of renewable energy systemsPresents practical applications and case studies of MXene and advanced nanomaterials in renewable energy, real-world examples of how these materials enhance energy efficiency, storage, and conversionCatalyzes advancements and innovation in renewable energy applications, contributing to the global effort towards more sustainable energy solutions

Machine Learning and Bayesian Methods in Inverse Heat Transfer offers a comprehensive exploration of inverse problems in heat transfer, blending classical techniques with modern advancements in machine learning and Bayesian methods. This essential guide provides a hands-on approach with practical examples, making complex concepts accessible to readers seeking to deepen their understanding of this critical field. The text covers essential topics including Introduction to Inverse Problems, Statistical Description of Errors and General Approach, Classical Techniques, Bayesian Methods, and a Machine Learning Approach to Inverse Problems. Readers will explore key concepts such as Gaussian distribution, linear and non-linear regression, Gauss-Newton algorithm, Tikhonov regularization, and more, gaining a solid foundation in applying these methods to real-world heat transfer scenarios. For engineers, scientists, senior undergraduates, graduates, and researchers in heat transfer and related fields, this book serves as a vital resource. By offering clear explanations, practical examples, and MATLAB codes, it empowers readers to tackle inverse problems with confidence. Whether readers are practicing engineers or graduate students specializing in heat and mass transfer, this book equips them with the tools and knowledge to excel and further advances in their field.Emphasizes a machine learning approach to solving inverse heat transfer problemsProvides detailed explanations of fundamental scientific concepts in a clear, precise mannerIntegrates modern techniques with traditional methods to provide comprehensive understandingOffers practical examples throughout, allowing readers to apply theoretical knowledge to real-world scenarios, enhancing learning and advancing interdisciplinary applicationsSupports sustainability and responsible energy consumption -- especially UN SDGs 4, 7, 11, 12, 13, and 15 -- inverse heat transfer problems are important for researchers advancing efficient energy utilization

Innovations in Production and Applications of Alternative Fuels is a comprehensive reference book that covers the basics of alternative fuels, production techniques, physicochemical properties, and their various applications from a thermal engineering perspective. It focuses on alternative fuel production from diverse feedstocks, providing insights into feedstock selection, preparation techniques, combustion performance, emissions, and the use of additives and nanoparticles to enhance fuel performance in internal combustion engines. This book is essential for understanding the field of alternative fuels, and is invaluable for professionals and researchers in energy engineering, thermal engineering, environmental science, and sustainable development.It delves into different feedstocks, including edible-based, non-edible based, waste-based alternatives, algae-based feedstocks, and hydrogen carriers like ammonia fuel. It also explores the application of nanoparticles and additives to enhance fuel performance. Additionally, economic aspects, energy policies, and challenges associated with alternative fuels are discussed, offering practical insights and recommendations for future advancements.Explores different types of alternative fuels, focusing on waste-based productionProvides a comprehensive understanding of fundamental and advanced alternative fuel production techniques, including feedstock selection and mathematical models for parameter measurementAnalyzes physicochemical properties of alternative fuels and their impact on combustion and engine performanceDiscusses economics and energy policies related to alternative fuels, covering commercialization and future recommendationsExamines the use of additives and nanoparticles in alternative fuels to enhance internal combustion engine performance

Nanofluid Applications in Thermal Engineering: Advanced Numerical Investigations delves into the forefront of scientific research, exploring advanced numerical techniques for modeling nanofluids in thermal engineering. Featuring cutting-edge computational simulations, it offers invaluable insights into optimizing heat transfer processes using hybrid and ternary nanofluids. From thermophysical and rheological analyses to exploring the thermal performance of magnetic power-law hybrid nanofluids, the book provides a comprehensive overview of the latest developments. By addressing daily challenges faced in research, such as selecting appropriate numerical methods and bridging the gap between mathematical models and real-world problems, this book serves as a guide for navigating complex nanofluid applications. Topics explore advanced numerical modeling of hybrid and ternary nanofluids, the effects of internal heat generation and chemical reactions in porous media, and the magneto thermal aspects of ternary composite nanomaterials. With a focus on real-life applications, such as Darcy-Forchheimer flow with Marangoni convection and thermal control for Casson hybrid nanofluid flow, this book equips readers with the knowledge needed to navigate complex nanofluid models in thermal engineering systems effectively. For thermal engineers and nanofluids researchers seeking to enhance their understanding and practical applications, this book is a vital resource.Explores advanced numerical techniques for modeling nanofluids in thermal engineeringDelivers insights into cutting-edge computational simulations for optimizing heat transfer processesExplains the behavior of hybrid and ternary nanofluids through detailed analysisShowcases innovative applications of nanofluids in diverse thermal engineering systemsBridges interdisciplinary knowledge that is essential for research and practical applications in mathematical modeling

Advancements in Thermoelectric Modules: Harvesting Energy through Innovative Applications and Integrations addresses fundamental principles of thermoelectricity, materials selection, fabrication techniques, simulation methodologies, and diverse applications in various industries such as automotive, aerospace, energy, and electronics. Readers will benefit from the book's practical guidance, case studies, and in-depth analyses of emerging trends and future directions in thermoelectric technology. From optimizing thermoelectric module performance to integrating with renewable energy systems, this book provides a holistic view of harnessing waste heat recovery, energy harvesting, and temperature control through thermoelectric modules and their applications.Researchers and engineers can access the latest research findings and optimization techniques while industry professionals will find guidance on system integration and economic feasibility. Educators and students will benefit from a comprehensive resource covering fundamental principles, practical applications, and emerging trends in thermoelectrics.Covers various applications and integration strategies of thermoelectric modules across different industriesProvides readers with a deep understanding of how thermoelectric technology can be utilized for energy efficiency and sustainabilityOffers readers practical insights and real-world case studies, providing actionable guidance on designing, implementing, and optimizing thermoelectric systemsExplores emerging trends, research developments, and future directions in thermoelectric technologyEducates readers on the latest advancements and opportunities in the field, including advanced materials, manufacturing techniques, and system integration approachesAligns with UN Sustainable Development Goals SDG 7: Affordable and Clean Energy, SDG 9: Industry, Innovation, and Infrastructure, and SDG 13: Climate Action

Ternary Hybrid Nanofluids: Principles and Applications offers a groundbreaking exploration of the properties, preparation techniques, and diverse applications of ternary hybrid nanofluids in heat transfer. This comprehensive reference encompasses various physical and chemical properties, including thermophysical characteristics and heat transfer behaviors, along with detailed mathematical models and correlations. From an in-depth analysis of preparation techniques to discussions on future research challenges and opportunities, this book serves as an invaluable resource for advanced students, researchers and engineers seeking a profound understanding of ternary hybrid nanofluids.Ternary Hybrid Nanofluids: Principles and Applications covers essential topics for researchers and practitioners in the field. Chapters include an introduction to ternary hybrid nanofluids, discussions on formation and stability, exploration of thermal, electrical, and optical properties, analysis of rheological behavior, applications in solar thermal and convective heat transfer systems, utilization in heat pipes and thermosyphons, and development insights on limitations and opportunities for ternary nanofluids. Additionally, the book addresses the utilization of cutting fluid doped with nanoparticles for machining processes, providing comprehensive insights into the synthesis, properties, and applications of ternary hybrid nanofluids.Ternary Hybrid Nanofluids: Principles and Applications offers benefits to professionals and academics in various fields, including material scientists, mechanical and chemical engineers, physicists, and researchers specializing in nanofluids. Students, experienced researchers and industry professionals seeking to enhance their understanding of heat transfer and nanotechnology will find this book to be a valuable reference.Provides readers with detailed information on synthesis approaches and how they impact the stability and thermophysical properties of ternary hybrid nanofluidsExplores applications of ternary hybrid nanofluids in different areas, including heat transfer, energy storage, and renewable energyAssesses feasibility of predicting experimental results using correlations and mathematical modelsDescribes challenges experienced in developing ternary hybrid nanofluids in practice and prospective directions

Converging Nanotechnology and Digital Intelligence in Energy Storage addresses the growing demand for advanced energy storage technologies that support renewable energy integration, decarbonization, and sustainable development. The book examines the convergence of nanotechnology and digital innovation as a pathway to improving the efficiency, safety, scalability, and lifecycle performance of energy storage systems.The volume explores nanomaterials including nanostructured electrodes, and advanced materials for batteries and hydrogen storage. It also examines digital technologies such as artificial intelligence, Internet of Things platforms, blockchain for monitoring, optimization, predictive maintenance, and decentralized energy management. Together, these topics provide a comprehensive perspective on the design and operation of next-generation energy storage solutions.Converging Nanotechnology and Digital Intelligence in Energy Storage serves as a valuable reference for researchers, engineers, scientists, and industry professionals working across energy, materials science, and digital technologies. By combining theoretical foundations with practical applications and emerging trends, the book offers actionable insights for accelerating innovation in energy storage and advancing global energy transition objectives.Explains the integration of nanotechnology and digital intelligence for advanced energy storage systemsExamines emerging nanomaterials for batteries, and hydrogen storage applicationsProvides practical guidance on artificial intelligence, IoT, blockchain, and digital implementationEvaluates sustainable materials and strategies for improving environmental performanceHighlights future directions for next-generation energy storage innovation

Thermosiphon Heat Transport Devices: Principles of Operation, Modeling, Design and Applications explores the performance, applications, and future potential of the Thermosiphon heat transport device, providing a comprehensive overview of its theoretical background, working principles, various configurations, and practical applications. From discussing passive heat transport systems to analyzing the effect of operational and geometric parameters, the book explores system design, optimization, and the impact of bends and heat transfer fluids on performance. Additionally, it addresses applications, challenges, and limitations of the THTD, catering to a diverse audience interested in sustainable energy technologies and passive heat transport mechanisms.Tailored for practicing engineers, graduate, post-graduate, and doctoral students in cross-disciplinary fields, this book fills an information gap surrounding Thermosiphon technology, offering insights into its theoretical origins, operational features, construction aspects, and analytical methodologies.Explores the performance, applications, and future potential of the thermosiphon heat transport device, offering insights into the theoretical background, working principles, different configurations, and field applicationsDiscusses theoretical, operational, and application aspects, offering a systematic procedure for conducting experimental, analytical, and computational analyses to assess system performanceAnalyzes challenges in designing and constructing the thermosiphon heat transport device, including material selection, analytical solutions, computational modeling, and post-processing methodologies for complex flow fieldsProvides a systematic outline of experimental, analytical, and computational procedures to evaluate the device's performance, design challenges, and the numerical analysis of various geometries and operating conditionsDelivers detailed design specifications and technical applications to deepen comprehension of system optimization and practical implementations across various fields

Advanced Thermal Storage Technologies for Sustainable Energy Applications explores the forefront of thermal storage technologies for renewable energy applications. Authored by a team of experts in the field, this book encapsulates the most significant scientific contributions and contents that offer detailed insights into various thermal storage methods and their applications. From advanced materials in thermal storage to innovations in solid-solid latent thermal storage, each chapter presents cutting-edge research and case studies that push the boundaries of sustainable energy solutions. This detailed exploration of thermal energy storage begins with an introduction to thermal storage for renewables, followed by discussions on advanced materials, sensible molten-salt thermal storage, and solid-solid latent thermal storage. The book covers sorption thermal storage technology, thermochemical heat storage advancements, and integration with phase change materials. With a comprehensive overview of heat-pump-integrated thermal storage and Carnot battery systems, readers gain a deep understanding of optimizing energy storage for low-grade heat recovery applications. The conclusion and future outlook section provides valuable insights into the evolving landscape of thermal storage technologies.Advanced Thermal Storage Technologies for Sustainable Energy Applications caters to a diverse audience of researchers, engineers, and policymakers seeking to enhance their knowledge in renewable energy utilization. The book addresses the pressing need for updated resources in the face of rapid technological advancements and the increasing emphasis on energy efficiency and sustainability. By offering a holistic view of thermal storage methods and practical applications, this book equips readers with the tools to navigate the complexities of thermal energy storage technology and implement effective solutions in the ever-evolving renewable energy sector.Analyzes cutting-edge thermal storage technologies for renewable energy applicationsExplores advanced materials and innovative solutions in thermal energy storageDiscusses real-world case studies and applications for effective implementationEvaluates the future outlook and trends in thermal storage technologiesProvides comprehensive insights for researchers, engineers, and policymakers in the renewable energy sector

Advancements in Thermal Engineering and Chemistry for Lithium Batteries: Challenges, Innovations and Practical Applications is a timely and essential guide for advancing the performance, safety, and sustainability of lithium-ion batteries. The book begins with a foundational introduction to lithium batteries and then explores the mechanisms of thermal runaway and associated safety concerns. It continues with a classification of cathodes and electrolytes that is followed by in-depth discussions on electrolyte interactions, optimization strategies, and the role of additives. Readers are guided through the reaction kinetics of cathodes and electrolytes, the development of advanced cathode materials, and the thermal stability of various components.The book then examines the importance of thermal management and the integration of artificial intelligence and machine learning in battery optimization. It concludes with chapters on sustainability, environmental impact, and emerging technologies shaping the future of lithium battery systems. Users will find this to be a comprehensive and accessible roadmap on battery research, development, and application. It combines foundational knowledge with cutting-edge insights, enabling readers to move confidently from theory to practice in designing safer, more efficient, and more sustainable energy storage solutions.Evaluates safety challenges through the lens of material science, electrochemistry, thermal engineering, and artificial intelligenceApplies innovations in high energy density and solid-state electrolytes to enhance battery performance and reliabilityAssesses sustainability strategies by examining recycling techniques and economic impact modelsAnalyzes electrode and electrolyte kinetics to uncover their roles in thermal stability and efficiencyInterprets real-world case studies and emerging technologies to project future directions in lithium battery development