IIW Collection – serie

Visar alla böcker i serien IIW Collection. Handla med fri frakt och snabb leverans.

19 produkter

Kategorier

19 produkter

Hazardous Substances in Welding and Allied Processes
AvVilia Elena Spiegel-Ciobanu,Luca Costam. fl.
Inbunden, Engelska, 2020
557 kr
Skickas inom 10-15 vardagar
This book provides information on the generation and the effects of hazardous substances that are produced during welding and allied processes. These processes are thermal cutting, thermal spraying, soldering and brazing. The book offers guidance on the determination of hazardous substances and it simplifies assessment of the hazard due to hazardous substances. In addition, the book explains tests in order to understand the concentration and intensity of key hazardous substances. Last but not least, the book suggests several possibilities of avoiding the risk to worker’s health as a result of exposing them to these substances.
Hazardous Substances in Welding and Allied Processes
AvVilia Elena Spiegel-Ciobanu,Luca Costam. fl.
Häftad, Engelska, 2021
557 kr
Skickas inom 10-15 vardagar
This book provides information on the generation and the effects of hazardous substances that are produced during welding and allied processes. These processes are thermal cutting, thermal spraying, soldering and brazing. The book offers guidance on the determination of hazardous substances and it simplifies assessment of the hazard due to hazardous substances. In addition, the book explains tests in order to understand the concentration and intensity of key hazardous substances. Last but not least, the book suggests several possibilities of avoiding the risk to worker’s health as a result of exposing them to these substances.
Best Practice Guideline for Statistical Analyses of Fatigue Results
AvGuy Parmentier,Michel Hutherm. fl.
Inbunden, Engelska, 2023
1 656 kr
Skickas inom 10-15 vardagar
This book provides a comprehensive guidance for the use of sound statistical methods and for the evaluation of fatigue data of welded components and structures obtained under constant amplitude loading and used to produce S-N curves. Recommendations for analyzing fatigue data are available, although they do not deal with all the statistical treatments that may be required to utilize fatigue test results, and none of them offers specific guidelines for analyzing fatigue data obtained from tests on welded specimens. For an easy use, working sheets are provided to assist in the proper statistical assessment of experimental fatigue data concerning practical problems giving the procedure and a numerical application as illustration.
Best Practice Guideline for Statistical Analyses of Fatigue Results
AvGuy Parmentier,Michel Hutherm. fl.
Häftad, Engelska, 2024
1 216 kr
Skickas inom 10-15 vardagar
This book provides a comprehensive guidance for the use of sound statistical methods and for the evaluation of fatigue data of welded components and structures obtained under constant amplitude loading and used to produce S-N curves. Recommendations for analyzing fatigue data are available, although they do not deal with all the statistical treatments that may be required to utilize fatigue test results, and none of them offers specific guidelines for analyzing fatigue data obtained from tests on welded specimens. For an easy use, working sheets are provided to assist in the proper statistical assessment of experimental fatigue data concerning practical problems giving the procedure and a numerical application as illustration.
Recommendations for Fatigue Design of Welded Joints and Components
AvA. F. Hobbacher,J. Baumgartner
Inbunden, Engelska, 2024
1 656 kr
Skickas inom 10-15 vardagar
This book presents an enriched exploration of structural fatigue assessment. Now in its updated form, this comprehensive edition delves into foundational principles while introducing extensive revisions and fresh content. Notable enhancements include a refined discussion on stress determination, an expanded section on fatigue resistance, also for welded thin sheets, and a thorough update of crucial chapters such as fatigue assessment using S-N curves at constant and variable amplitudes as well as practical application of fracture mechanics on fatigue of welded joints. The addition of new chapters on high-frequency mechanical impact (HFMI) treatment, insightful statisticalconsiderations based on IIW recommendations, and practical application examples further distinguish this edition. With updated references and meticulous attention to detail, this new edition emerges as an indispensable resource, offering professionals and enthusiasts a deeper understanding of fatigue assessment in structural engineering. Prepared as the result of an initiative by Commissions XIII and XV of the International Institute of Welding (IIW), this book represents a significant contribution to the field.
Recommendations for Fatigue Design of Welded Joints and Components
AvA. F. Hobbacher,J. Baumgartner
Häftad, Engelska, 2025
1 326 kr
Skickas inom 10-15 vardagar
This book presents an enriched exploration of structural fatigue assessment. Now in its updated form, this comprehensive edition delves into foundational principles while introducing extensive revisions and fresh content. Notable enhancements include a refined discussion on stress determination, an expanded section on fatigue resistance, also for welded thin sheets, and a thorough update of crucial chapters such as fatigue assessment using S-N curves at constant and variable amplitudes as well as practical application of fracture mechanics on fatigue of welded joints. The addition of new chapters on high-frequency mechanical impact (HFMI) treatment, insightful statisticalconsiderations based on IIW recommendations, and practical application examples further distinguish this edition. With updated references and meticulous attention to detail, this new edition emerges as an indispensable resource, offering professionals and enthusiasts a deeper understanding of fatigue assessment in structural engineering. Prepared as the result of an initiative by Commissions XIII and XV of the International Institute of Welding (IIW), this book represents a significant contribution to the field.
Retrofitting Engineering for Fatigue Damaged Steel Structures
AvChitoshi Miki
Inbunden, Engelska, 2025
1 876 kr
Skickas inom 10-15 vardagar
This book summarizes the numerous cases of fatigue damage of steel structures that have been reported over the past years, as well as the repair and retrofitting technologies that have been proposed and applied to solve the issue. It focuses on the causes and repair practices and provides comprehensive information to anyone with interest in the topic. This book was written as part of the activities of the International Institute of Welding (IIW), Commission XIII (Fatigue of Welded Components and Structures) Working Group 5 (Life Extension of Welded Structures by Repair, Retrofitting and Structural Monitoring; hereafter referred to as IIW XIII WG5). The author is the former chairman of IIW XIII WG5.
Retrofitting Engineering for Fatigue Damaged Steel Structures
AvChitoshi Miki
Häftad, Engelska, 2026
1 326 kr
Skickas inom 10-15 vardagar
This book summarizes the numerous cases of fatigue damage of steel structures that have been reported over the past years, as well as the repair and retrofitting technologies that have been proposed and applied to solve the issue. It focuses on the causes and repair practices and provides comprehensive information to anyone with interest in the topic. This book was written as part of the activities of the International Institute of Welding (IIW), Commission XIII (Fatigue of Welded Components and Structures) Working Group 5 (Life Extension of Welded Structures by Repair, Retrofitting and Structural Monitoring; hereafter referred to as IIW XIII WG5). The author is the former chairman of IIW XIII WG5.
IIW Guidelines on Weld Quality in Relationship to Fatigue Strength
AvBertil Jonsson,G. Dobmannm. fl.
Inbunden, Engelska, 2016
1 326 kr
Skickas inom 10-15 vardagar
This book presents guidelines on quantitative and qualitative measures of the geometric features and imperfections of welds to ensure that it meets the fatigue strength requirements laid out in the recommendations of the IIW (International Institute of Welding). Welds that satisfy these quality criteria can be assessed in accordance with existing IIW recommendations based on nominal stress, structural stress, notch stress or linear fracture mechanics. Further, the book defines more restrictive acceptance criteria based on weld geometry features and imperfections with increased fatigue strength. Fatigue strength for these welds is defined as S-N curves expressed in terms of nominal applied stress or hot spot stress. Where appropriate, reference is made to existing quality systems for welds.In addition to the acceptance criteria and fatigue assessment curves, the book also provides guidance on their inspection and quality control. The successful implementation of these methods depends on adequate training for operators and inspectors alike. As such, the publication of the present IIW Recommendations is intended to encourage the production of appropriate training aids and guidelines for educating, training and certifying operators and inspectors.
Best Practices for the Use of Simulation in POD Curves Estimation
Application to UT Weld Inspection
AvBastien Chapuis,Pierre Calmonm. fl.
Inbunden, Engelska, 2018
557 kr
Skickas inom 10-15 vardagar
This book provides best-practice guidance and practical recommendations on the use of numerical simulation for probability of detection (POD) curve estimation in the study of non-destructive testing reliability. It focuses on ultrasonic testing (UT) weld inspection but many of the principles can be applied to a broader range of techniques and situations. The first part lists and briefly describes the principal documents that establish the recommended statistical framework adapted for POD curve estimation. It also presents the most important initiatives on the model assisted probability of detection (MAPOD) approach in recent years. The second part provides details of the advantages and limitations of the simulation in this context. The third part then describes the prerequisites for the use of simulation (validation of the software, expertise of the user), and the fourth and main part offers the methodology and guidance as well as possible applications for using POD curves determined using simulation.
Sensors, Algorithms and Applications for Structural Health Monitoring
IIW Seminar on SHM, 2015
AvBastien Chapuis,Eric Sjerve
Inbunden, Engelska, 2017
1 106 kr
Skickas inom 10-15 vardagar
This book provides insights into sensor development for structural health monitoring. Current technological advances mean that the field is changing rapidly, making standardization an ongoing challenge. As such, the book gathers several essential contributions in the area of sensor development, including macro-fiber composite sensors for crack detection and optical fiber Bragg gratings for flaw detection. It also discusses the use of the welds in the structure as sensors, and probability estimation of detection for various sensor configurations. In addition, it presents methods based on vibration signal variations to detect small defects in composite components or to monitor large structures. Last but not least, the book includes special structural health monitoring applications in industrial components such as a nuclear boiler support spines and industrial presses as well as in corrosion monitoring of pipes.
IIW Guidelines on Weld Quality in Relationship to Fatigue Strength
AvBertil Jonsson,G. Dobmannm. fl.
Häftad, Engelska, 2018
941 kr
Skickas inom 10-15 vardagar
This book presents guidelines on quantitative and qualitative measures of the geometric features and imperfections of welds to ensure that it meets the fatigue strength requirements laid out in the recommendations of the IIW (International Institute of Welding). Welds that satisfy these quality criteria can be assessed in accordance with existing IIW recommendations based on nominal stress, structural stress, notch stress or linear fracture mechanics. Further, the book defines more restrictive acceptance criteria based on weld geometry features and imperfections with increased fatigue strength. Fatigue strength for these welds is defined as S-N curves expressed in terms of nominal applied stress or hot spot stress. Where appropriate, reference is made to existing quality systems for welds.In addition to the acceptance criteria and fatigue assessment curves, the book also provides guidance on their inspection and quality control. The successful implementation of these methods depends on adequate training for operators and inspectors alike. As such, the publication of the present IIW Recommendations is intended to encourage the production of appropriate training aids and guidelines for educating, training and certifying operators and inspectors.
Recommendations for Fatigue Design of Welded Joints and Components
AvA. F. Hobbacher
Häftad, Engelska, 2018
1 173 kr
Skickas inom 11-20 vardagar
This book provides a basis for the design and analysis of welded components that are subjected to fluctuating forces, to avoid failure by fatigue. It is also a valuable resource for those on boards or commissions who are establishing fatigue design codes. For maximum benefit, readers should already have a working knowledge of the basics of fatigue and fracture mechanics. The purpose of designing a structure taking into consideration the limit state for fatigue damage is to ensure that the performance is satisfactory during the design life and that the survival probability is acceptable. The latter is achieved by the use of appropriate partial safety factors. This document has been prepared as the result of an initiative by Commissions XIII and XV of the International Institute of Welding (IIW).
Best Practices for the Use of Simulation in POD Curves Estimation
Application to UT Weld Inspection
AvBastien Chapuis,Pierre Calmonm. fl.
Häftad, Engelska, 2019
557 kr
Skickas inom 10-15 vardagar
This book provides best-practice guidance and practical recommendations on the use of numerical simulation for probability of detection (POD) curve estimation in the study of non-destructive testing reliability. It focuses on ultrasonic testing (UT) weld inspection but many of the principles can be applied to a broader range of techniques and situations. The first part lists and briefly describes the principal documents that establish the recommended statistical framework adapted for POD curve estimation. It also presents the most important initiatives on the model assisted probability of detection (MAPOD) approach in recent years. The second part provides details of the advantages and limitations of the simulation in this context. The third part then describes the prerequisites for the use of simulation (validation of the software, expertise of the user), and the fourth and main part offers the methodology and guidance as well as possible applications for using POD curves determined using simulation.
Sensors, Algorithms and Applications for Structural Health Monitoring
IIW Seminar on SHM, 2015
AvBastien Chapuis,Eric Sjerve
Häftad, Engelska, 2018
1 216 kr
Skickas inom 10-15 vardagar
This book provides insights into sensor development for structural health monitoring. Current technological advances mean that the field is changing rapidly, making standardization an ongoing challenge. As such, the book gathers several essential contributions in the area of sensor development, including macro-fiber composite sensors for crack detection and optical fiber Bragg gratings for flaw detection. It also discusses the use of the welds in the structure as sensors, and probability estimation of detection for various sensor configurations. In addition, it presents methods based on vibration signal variations to detect small defects in composite components or to monitor large structures. Last but not least, the book includes special structural health monitoring applications in industrial components such as a nuclear boiler support spines and industrial presses as well as in corrosion monitoring of pipes.
IIW Recommendations for the HFMI Treatment
For Improving the Fatigue Strength of Welded Joints
AvGary B. Marquis,Zuheir Barsoum
Inbunden, Engelska, 2016
1 326 kr
Skickas inom 10-15 vardagar
This book of recommendations presents an overview of High Frequency Mechanical Impact (HFMI) techniques existing today in the market and their proper procedures, quality assurance measures and documentation. Due to differences in HFMI tools and the wide variety of potential applications, certain details of proper treatments and quantitative quality control measures are presented generally. An example of procedure specification as a quality assurance measure is given in the Appendix. Moreover, the book presents procedures for the fatigue life assessment of HFMI-improved welded joints based on nominal stress, structural hot spot stress and effective notch stress. It also considers the extra benefit that has been experimentally observed for HFMI-treated high-strength steels.The recommendations offer proposals on the effect of loading conditions like high mean stress fatigue cycles, variable amplitude loading and large amplitude/low cycle fatigue cycles. Special considerations for low stress concentration welded joints are also given. In order to demonstrate the use of the guideline, the book provides several fatigue assessment examples.
Structural Hot-Spot Stress Approach to Fatigue Analysis of Welded Components
Designer's Guide
AvErkki Niemi,Wolfgang Frickem. fl.
Inbunden, Engelska, 2017
1 436 kr
Skickas inom 10-15 vardagar
This book provides background and guidance on the use of the structural hot-spot stress approach to fatigue analysis. The book also offers Design S-N curves for use with the structural hot-spot stress for a range of weld details, and presents parametric formulas for calculating stress increases due to misalignment and structural discontinuities. Highlighting the extension to structures fabricated from plates and non-tubular sections. The structural hot-spot stress approach focuses on cases of potential fatigue cracking from the weld toe and it has been in use for many years in tubular joints.Following an explanation of the structural hot-spot stress, its definition and its relevance to fatigue, the book describes methods for its determination. It considers stress determination from both finite element analysis and strain gauge measurements, and emphasizes the use of finite element stress analysis, providing guidance on the choice of element type and size for use with either solid or shell elements. Lastly, it illustrates the use of the recommendations in four case studies involving the fatigue assessment of welded structures using the structural hot-spot stress
IIW Recommendations for the HFMI Treatment
For Improving the Fatigue Strength of Welded Joints
AvGary B. Marquis,Zuheir Barsoum
Häftad, Engelska, 2018
941 kr
Skickas inom 10-15 vardagar
This book of recommendations presents an overview of High Frequency Mechanical Impact (HFMI) techniques existing today in the market and their proper procedures, quality assurance measures and documentation. Due to differences in HFMI tools and the wide variety of potential applications, certain details of proper treatments and quantitative quality control measures are presented generally. An example of procedure specification as a quality assurance measure is given in the Appendix. Moreover, the book presents procedures for the fatigue life assessment of HFMI-improved welded joints based on nominal stress, structural hot spot stress and effective notch stress. It also considers the extra benefit that has been experimentally observed for HFMI-treated high-strength steels.The recommendations offer proposals on the effect of loading conditions like high mean stress fatigue cycles, variable amplitude loading and large amplitude/low cycle fatigue cycles. Special considerations for low stress concentration welded joints are also given. In order to demonstrate the use of the guideline, the book provides several fatigue assessment examples.
Structural Hot-Spot Stress Approach to Fatigue Analysis of Welded Components
Designer's Guide
AvErkki Niemi,Wolfgang Frickem. fl.
Häftad, Engelska, 2018
996 kr
Skickas inom 10-15 vardagar
This book provides background and guidance on the use of the structural hot-spot stress approach to fatigue analysis. The book also offers Design S-N curves for use with the structural hot-spot stress for a range of weld details, and presents parametric formulas for calculating stress increases due to misalignment and structural discontinuities. Highlighting the extension to structures fabricated from plates and non-tubular sections. The structural hot-spot stress approach focuses on cases of potential fatigue cracking from the weld toe and it has been in use for many years in tubular joints.Following an explanation of the structural hot-spot stress, its definition and its relevance to fatigue, the book describes methods for its determination. It considers stress determination from both finite element analysis and strain gauge measurements, and emphasizes the use of finite element stress analysis, providing guidance on the choice of element type and size for use with either solid or shell elements. Lastly, it illustrates the use of the recommendations in four case studies involving the fatigue assessment of welded structures using the structural hot-spot stress

Företag, bibliotek eller offentlig verksamhet?

IIW Collection – serie

Hazardous Substances in Welding and Allied Processes

Hazardous Substances in Welding and Allied Processes

Best Practice Guideline for Statistical Analyses of Fatigue Results

Best Practice Guideline for Statistical Analyses of Fatigue Results

Recommendations for Fatigue Design of Welded Joints and Components

Recommendations for Fatigue Design of Welded Joints and Components

Retrofitting Engineering for Fatigue Damaged Steel Structures

Retrofitting Engineering for Fatigue Damaged Steel Structures

IIW Guidelines on Weld Quality in Relationship to Fatigue Strength

Best Practices for the Use of Simulation in POD Curves Estimation

Sensors, Algorithms and Applications for Structural Health Monitoring

IIW Guidelines on Weld Quality in Relationship to Fatigue Strength

Recommendations for Fatigue Design of Welded Joints and Components

Best Practices for the Use of Simulation in POD Curves Estimation

Sensors, Algorithms and Applications for Structural Health Monitoring

IIW Recommendations for the HFMI Treatment

Structural Hot-Spot Stress Approach to Fatigue Analysis of Welded Components

IIW Recommendations for the HFMI Treatment

Structural Hot-Spot Stress Approach to Fatigue Analysis of Welded Components

Mina sidor

Mina sidor

Hjälp

Hjälp

Om Bokus

Om Bokus

Populärt

Populärt

Inspiration

Inspiration